DESCRIPTION B RELEASED PER ER040853 2. MATERIAL SPECIFICATIONS: BODY, CENTER CONTACT & FERRULE: BRASS PER ASTM B16. OUTER CONTACT : COPPER ALLOY. INSULATOR: TEFLON PER ASTM D1710. P/N 0345-E00-C7101N 0345-E00-C7101NU 3. FINISH SPECIFICATIONS: BODY & FERRULE: .000100 MIN NICKEL PER AMS-QQ-N-290 OVER COPPER FLASH PER ASTM B734 (RoHS). CONTACT: .000030 MIN GOLD PER ASTM B488 OVER .000080 MIN NICKEL PER AMS-QQ-N-290 (RoHS). DESCRIPTION SINGLE PACK BULK PACK BY APPD DATE CY REV BB 03/13/12 NOTES: UNLESS OTHERWISE SPECIFIED 1. DESIGNED FOR USE WITH BELDEN 1505A CABLE OR EQUIVALENT. QTY 1 400 4. ELECTRICAL SPECIFICATIONS: IMPEDANCE: 75 OHMS FREQUENCY RANGE: DC-6.0 GHz. RETURN LOSS: <-20dB UP TO 3.0 GHz, <-15dB UP TO 6.0 GHz. 5. COMPLIANT TO SMPTE 424M (3G-SDI) STANDARD. 6. CONTACT AND FERRULE SHIPPED LOOSE. 7. INTERFACE PER CECC 22230. 8. CRIMP FERRULE (.255 HEX) AND CONTACT (.042 HEX) USE KINGS KTH-2261. 9. ASSEMBLE TO CABLE PER CAP-E03. .300 7.62 .315 8.00 .263 6.68 .500 12.70 .035 .89 .150 3.81 1.29 32.8 WHEN ASSEMBLED .62515.88 CATALOG P/N: 0345-E00-C7101N .3278.31 .150 3.81 RECOMMENDED CABLE TRIM DIMENSIONS PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 2:1 THIRD ANGLE CUSTOMER SALES DRAWING DRAWN DW APPROVED WPM DMF026 B Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 DATE APPROVED 04/26/10 Dcam DATE APPROVED 05/10/10 XXX DATE 05/07/10 DATE XX/XX/XX 75 OHM 1.0/2.3 PLUG FOR BELDEN 1505A CABLE (RoHS COMPLIANT) A SD0345-E00-C7101N SHT OF 1 1 REV B