DESCRIPTION BY APPD DATE B REVISED PER ECR-ER22873 CTC 1. FOR GENERAL SERIES SPECIFICATIONS, SEE SDPRF-206. REV CY 03/22/10 NOTES: UNLESS OTHERWISE SPECIFIED 2. MATERIAL SPECIFICATIONS: BAYONET SLEEVE, BODY, CONTACT, CLAMP: BRASS PER ASTM B16 INSULATOR: TEFLON PER ASTM D1710 SPRING WASHER, OUTER CONTACT: BERYLLIUM COPPER, ASTM-B-194 GASKET: SILICONE RUBBER 3. FINISH SPECIFICATIONS: BAYONET SLEEVE, BODY, CLAMP: .000100MIN NICKEL PER AMS-QQ-N-290 OVER COPPER FLASH PER ASTM B734 (ROHS) CONTACT: .000030 MIN. GOLD PER ASTM B488, OVER NICKEL PER AMS-QQ-N-290 (ROHS) SPRING WASHER: .000200 MIN SILVER PER QQ-S-365 OVER COPPER PER ASTM B734 (ROHS) ALL OTHER METAL PARTS: .000050 MIN NICKEL PER AMS-QQ-N290 OVER .000050 MIN COPPER PER ASTM B734 (ROHS) MARKING: KINGS+P/N+DATE CODE + LOCATION CODE 4. FOR USE WITH TACHII CABLE TCX-5CFWS OR EQUIVALENT . 5. ASSEMBLE TO CABLE USING CAP-702. 6. ELECTRIC SPECIFICATIONS: IMPEDANCE: 75 OHMS FREQUENCY RANGE: DC TO 3 GHz RETURN LOSS: 26.5 dB MIN. (DC TO ) .518 13.16 .472 [11.99] ACROSS FLATS .413 10.49 .138 3.51 ( RECOMMENDED CABLE TRIMMING DIMENSIONS 1.516 38.51 REF. ) WHEN ASSEMBLED CATALOG P/N: 2065-700-5CW01N PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 2:1 THIRD ANGLE Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 CUSTOMER SALES DRAWING DRAWN CY APPROVED WPM DMF026 B DATE APPROVED 12/17/08 DCam DATE APPROVED 12/19/08 XXX DATE 12/19/08 DATE XX/XX/XX BNC 75 PLUG FOR TCX-5CFWS (ROSH COMPLIANT) A SD2065-700-5CW01N SHT 1 OF 1 REV B