DESCRIPTION C REVISED PER ECR-ER13719 BY APPD DATE 2. MATERIAL SPECIFICATIONS: BAYONET SLEEVE, BODY, CONTACT: BRASS PER ASTM B16 INSULATOR: TEFLON PER ASTM D1710 SPRING WASHER, OUTER CONTACT: BERYLLIUM COPPER, ASTM-B-194 GASKET: SILICONE RUBBER FERRULE: COMMERCIAL BRONZE, ASTM-B-135 OR ASTM B-36 CY 1. FOR GENERAL SERIES SPECIFICATIONS, SEE SDPRF-206. REV HUN 02/12/09 NOTES: UNLESS OTHERWISE SPECIFIED 3. FINISH SPECIFICATIONS: BAYONET SLEEVE, BODY, FERRULE: .000100MIN NICKEL PER AMS-QQ-N-290 OVER COPPER FLASH PER ASTM B734 (ROHS) CONTACT: .000050 MIN. GOLD PER ASTM B488, OVER NICKEL PER AMS-QQ-N-290 (ROHS) ALL OTHER METAL PARTS: .000050 MIN NICKEL PER AMS-QQ-N290 OVER .000050 MIN COPPER PER ASTM B734 4. CONTACT AND FERRULE SHIPPED LOOSE. 5. FOR USE WITH TACHII TCX-3CHD OR EQUIVALENT. 6. FOR CRIMPING USE KINGS KTH-5000 & KTH-5005 (.232 HEX. AND .054 SQUARE). 7. ASSEMBLE TO CABLE SEE CAP-E01. MARKING: KINGS+2065+CABLE CODE+ DATE CODE+LACATION CODE 8. ELECTRIC SPECIFICATIONS: IMPEDANCE: 75 OHMS FREQUENCY RANGE: DC TO 3 GHz RETURN LOSS: 25 dB MIN (DC TO 3 GHz) .198 5.03 .270 6.86 .234 5.94 .134 3.40 .591 15.01 ( .748 19.00 1.372 34.85 ) WHEN ASSEMBLED CATALOG P/N: 2065-E00-3CH01N .394 10.01 .138 3.51 PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 2.5:1 WincheserElecronics ® CUSTOMER DRAWING RECOMMENDED CABLE TRIM DIMENSIONS DRAWN CY APPROVED XXX DATE APPROVED 07/31/08 CTC DATE APPROVED XX/XX/XX XXX DATE 09/01/08 DATE XX/XX/XX Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 BNC 75 PLUG FOR TACHII TCX-3CHD (ROHS COMPLIANT) A SD2065-E00-3CH01N SHT 1 OF 1 REV C