GS1A WILLAS THRU GS1M 1.0 AMP GLASS PASSIVATED SILICON RECTIFIER DO-214AC/SMA PACKAGE Pb Free Product FEATURES * Glass passivated device * Ideal for surface mounted applications * Low leakage current * Metallurgically bonded construction * RoHS product for packing code suffix "G" Halogen free product for packing code suffix "H" MECHANICAL DATA * Case: DO-214AC/SMA Molded plastic * Epoxy: UL 94V-O rate flame retardant * Lead: MIL-STD-202E method 208C guaranteed * Mounting position: Any * Weight: 0.066 grams Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive of inductive load. For capacitive load, derate current by 20% RATINGS Marking Code Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Current at TA = 75℃ Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 2) Typical Junction Capacitance (Note 1) Operating Temperature Range Storage Temperature Range SYMBOL VRRM VRMS VDC GS1A GS1B GS1D GS1G GS1J GS1K GS1M GS1A GS1B GS1D GS1G GS1J GS1K GS1M 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 UNIT Volts Volts Volts IO 1.0 Amps IFSM 30 Amps RΘJL RΘJA CJ TJ TSTG 80 26 15 -65 to +175 -65 to +175 CHARACTERISTICS SYMBOL Maximum Forward Voltage at 1.0A DC(Note 3) Maximum Average Reverse Current at @TA=25℃ Rated DC Blocking Voltage @TA=125℃ VF GS1A GS1B GS1D IR GS1G 1.10 3.0 50 ℃/W PF ℃ ℃ GS1J GS1K GS1M UNIT Volts μAmps NOTES :1. Measured at 1.0 MHz and applied average voltage of 4.0VDC 2. Thermal resistance junction to terminal, 10.0X10.0mm2 copper pads to each terminal. 2007.12 WILLAS ELECTRONIC CORP. GS1A WILLAS THRU 1.0 AMP GLASS PASSIVATED SILICON RECTIFIER DO-214AC/SMA PACKAGE 2007.12 GS1M WILLAS ELECTRONIC CORP.