Series AM10E-Z 10 Watt | DC-DC Converter FEATURES: • • • • • RoHS compliant Full SMD technology Wide 2:1 input range High efficiency up to 86% Pin compatible with multiple manufacturers • • • • o o Operating temperature -40 C to + 85 C Input/Output Isolation 1500VDC Continuous short circuit protection Low profile metal package Models Single output Model AM10E-1203SZ AM10E-1205SZ AM10E-1207SZ AM10E-1209SZ AM10E-1212SZ AM10E-1215SZ AM10E-1218SZ AM10E-1224SZ AM10E-2403SZ AM10E-2405SZ AM10E-2407SZ AM10E-2409SZ AM10E-2412SZ AM10E-2415SZ AM10E-2418SZ AM10E-2424SZ AM10E-4803SZ AM10E-4805SZ AM10E-4807SZ AM10E-4809SZ AM10E-4812SZ AM10E-4815SZ AM10E-4818SZ AM10E-4824SZ Input Voltage (V) 9-18 9-18 9-18 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 18-36 18-36 18-36 36-72 36-72 36-72 36-72 36-72 36-72 36-72 36-72 Output Voltage (V) Output Current max (A) 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 2 2 1.38 1.111 0.833 0.666 0.55 0.416 2 2 1.38 1.111 0.833 0.666 0.55 0.416 2 2 1.38 1.111 0.833 0.666 0.55 0.416 Capacitance load, max (μF) 2200 2200 1000 1000 680 470 470 330 2200 2200 1000 1000 680 470 470 330 2200 2200 1000 1000 680 470 470 330 Efficiency (%) 78 83 82 84 85 84 84 85 78 83 83 83 85 86 86 86 78 84 84 84 86 85 85 85 Models Dual output Model AM10E-0505DZ AM10E-1203DZ AM10E-1205DZ AM10E-1207DZ AM10E-1209DZ AM10E-1212DZ AM10E-1215DZ AM10E-1218DZ AM10E-1224DZ AM10E-2403DZ AM10E-2405DZ Input Voltage (V) 4.5-9 9-18 9-18 9-18 9-18 9-18 9-18 9-18 9-18 18-36 18-36 Output Voltage (V) Output Current max (A) ±5 ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 ±3.3 ±5 ±700 ±1 ±1 ±0.69 ±0.555 ±0.416 ±0.333 ±0.27 ±0.208 ±1 ±1 Capacitance load, max (μF) ±1000 ±1000 ±1000 ±680 ±470 ±470 ±330 ±220 ±220 ±1000 ±1000 Efficiency (%) 77 78 83 80 80 85 85 80 85 78 84 Models www.aimtec.com F 051e R12.E Tel: +1 514 620 2722 1 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM10E-Z 10 Watt | DC-DC Converter Dual output (continued) Model AM10E-2407DZ AM10E-2409DZ AM10E-2412DZ AM10E-2415DZ AM10E-2418DZ AM10E-2424DZ AM10E-4803DZ AM10E-4805DZ AM10E-4807DZ AM10E-4809DZ AM10E-4812DZ AM10E-4815DZ AM10E-4818DZ AM10E-4824DZ Input Voltage (V) Output Voltage (V) 18-36 18-36 18-36 18-36 18-36 18-36 36-72 36-72 36-72 36-72 36-72 36-72 36-72 36-72 Output Current max (A) ±7.2 ±9 ±12 ±15 ±18 ±24 ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 Capacitance load, max (μF) ±0.69 ±0.555 ±0.416 ±0.333 ±0.27 ±0.208 ±1 ±1 ±0.69 ±0.555 ±0.416 ±0.333 ±0.27 ±0.208 ±680 ±470 ±470 ±330 ±220 ±220 ±1000 ±1000 ±680 ±470 ±470 ±330 ±220 ±220 Efficiency (%) 80 80 85 86 80 85 78 85 80 80 86 86 80 85 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Voltage range Nominal Typical 5 12 24 48 Units VDC π(PI ) Filter Turn on Transient process time Start up time Absolute Maximum Rating Maximum 4.5–9 9-18 18-36 36-72 350 20 -0.7-15 -0.7-24 -0.7-40 -0.7-80 5 Vin 12 Vin 24 Vin 48 Vin Peak Input Voltage time No Load Input Current Input reflected current ms ms VDC 100 ms mA mAp-p Rated Units 1500 VDC MOhm pF Maximum Units 70 35 Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Conditions Typical 3 sec > 1000 500 Output Specifications Parameters Voltage accuracy Voltage balance (Dual Output) Cross Regulation (Dual Output) Conditions Typical Balance Load 25% load on one output 100% load on second load ±1 ±1 % % ±5 % Short Circuit protection www.aimtec.com F 051e R12.E Continuous Tel: +1 514 620 2722 2 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM10E-Z 10 Watt | DC-DC Converter Output Specifications (continued) Parameters Conditions Short circuit restart Over load protection Line voltage regulation (Single) Line voltage regulation (Dual) Load voltage regulation (Single) Load voltage regulation (Dual) Temperature coefficient Ripple & Noise Rising time Typical Maximum Units Auto Recovery 140 ±0.5 ±0.5 ±0.5 ±1.0 ±0.02 100 10 HL-LL HL-LL 10-100% 10-100% 20MHz Bandwidth % % % % % o % C mVp-p ms General Specifications Parameters Switching frequency Operating temperature Storage temperature Maximum case temperature Derating Cooling Humidity Case material Potting Material Weight Dimensions (L x W x H) MTBF Maximum soldering temperature Transient recovery time Transient recovery deviation Conditions Typical 100% load -5Vin 12, 24, 48 Vin 200 Maximum KHz -40 to +65 -40 to +85 -40 to +125 Units o C o C o 100 C 5Vin See Graph 12, 24, 48 Vin Not Required Free air convection 95 % Nickel coated copper UL94V-0 rated 30 g Tolerance ±0.5mm 2.00 x 1.00 x 0.40 inches 50.80 x 25.40 x 10.16 mm o 5Vin: 1 121 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25 C) o 12, 24, 48 Vin: > 1 121 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25 C) o 1.5mm from case max 10 sec 260 C 250 uS ±3 % Safety Specifications for models with 12, 24, and 48 Vin Parameters Agency approvals Standards CE EN 55022 (Radiated) – Class A EN 55024 – Class A IEC61000-4-2 IEC61000-4-3 NOTE: Meets IEC60950-1:2001 Pin Out Specifications Pin Single Dual 1 2 3 4 5 +V Input -V Input +V Output No Pin. -V Output +V Input -V Input +V Output Common. -V Output www.aimtec.com F 051e R12.E Tel: +1 514 620 2722 3 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM10E-Z 10 Watt | DC-DC Converter 2.54 (0.10) Dimensions 50.80 (2.00) 10.16 (0.40) 5.08 (0.20) Bottom View 10.16 (0.40) 2 5 15.24 (0.60) 5.08 (0.20) Min 10.16 (0.40) Built-in Stand-offs to ease PCB cleaning DIA 1.00 (0.04) 4 10.16 (0.40) 25.40 (1.00) 1 20.32 (0.80) 15.24 (0.60) 2.54 (0.10) 10.16 (0.40) 3 Notes: All dimensions are typical in millimeters (inches). Tolerance ±0.25 (±0.01) Derating - 5Vin Model Free Air Convection 65º C Output Power (%) 100 80 Safe Operating Area 60 40 20 0 - 40 - 20 0 20 40 60 80 85 100 Ambient Temperature º C NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12.E Tel: +1 514 620 2722 4 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only