Tol RDC IDC ( H) % MAX IN ( ) (A) CDRH6D28-3R0 3.0uH @ 10kHz N 0.024 3 CDRH6D28-3R9 3.9uH @ 10kHz N 0.027 2.6 CDRH6D28-5R0 5.0uH @ 10kHz N 0.031 2.4 CDRH6D28-6R0 6.0uH @ 10kHz N 0.035 2.25 CDRH6D28-7R3 7.3uH @ 10kHz N 0.054 2.1 CDRH6D28-8R6 8.6uH @ 10kHz N 0.058 1.85 CDRH6D28-100 10uH @ 10kHz N 0.065 1.7 CDRH6D28-120 12uH @ 10kHz N 0.07 1.55 CDRH6D28-150 15uH @ 10kHz N 0.084 1.4 CDRH6D28-180 18uH @ 10kHz N 0.095 1.32 CDRH6D28-220 22uH @ 10kHz N 0.128 1.2 CDRH6D28-270 27uH @ 10kHz N 0.142 1.05 CDRH6D28-330 33uH @ 10kHz N 0.165 0.97 CDRH6D28-390 39uH @ 10kHz N 0.21 0.86 CDRH6D28-470 47uH @ 10kHz N 0.238 0.8 CDRH6D28-560 56uH @ 10kHz N 0.277 0.73 CDRH6D28-680 68uH @ 10kHz N 0.304 0.65 CDRH6D28-820 82uH @ 10kHz N 0.39 0.6 CDRH6D28-101 100uH @ 10kHz N 0.535 0.54 SPECIFICATION TYPE = CONSTRUCTION = TERIMAL COATING = OPERATING TEMP. = STORAGE TEMP = INSULATION RESISTANCE = DIELECTRIC STREGTH = HUMIDITY EFFECTS = PACKAGING MARKING CDRH6D28 SURFACE MOUNT POWER INDUCTOR NICKEL / SILVER -40 TO +85 C -55 TO +125 C 100MOhm. 100V TERMINAL-CORE 250Vac TERMINAL-CORE L 5 @ 95%RH, 40 C, 1HR Q 5 @ 95%RH, 40 C, 1HR = 1500PCS/REEL = 3 CHARACTERS, VALUE NOTE TOLERANCES L=15%; M=20%; N=30% 6.70 6.70 2.65 2 2.65 7.3 L 3.0 Part NAME PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AIT COMPONENTS LTD. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF AIT COMPONENTS LTD IS STRICTLY PROHIBITED. MATERIAL FINISH DATE AIT COMPONENTS LTD www.aitcomponents.com DRAWN CHECKED ENG APPR. -- UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES: ONE PLACE DECIMAL +/-0.3 TWO PLACE DECIMAL +/-0.13 ANGLE +/-1 DEGREE -- DO NOT SCALE DRAWING TITLE: CDRH6D28 SMD POWER INDUCTOR SIZE A DWG. NO. SCALE:1:1 CDRH6D28 SMD POWER INDUCTOR SHEET 1 OF 1 REV. 00