Tol RDC (µH) % IDC MAX IN (Ω) (A) D75C-1R0 1.0 @1.0 kHz M 0.023 2.88 D75C-1R5 1.5 @1.0 kHz M 0.027 2.61 D75C-3R3 3.3 @1.0 kHz M 0.035 2.28 D75C-4R7 4.7 @1.0 kHz M 0.041 2.08 D75C-6R8 6.8 @1.0 kHz M 0.047 1.94 D75C-100 10 @1.0 kHz M 0.05 1.68 D75C-120 12 @1.0 kHz M 0.07 1.54 D75C-150 15 @1.0 kHz M 0.08 1.39 D75C-180 18 @1.0 kHz M 0.09 1.26 D75C-220 22 @1.0 kHz M 0.11 1.13 D75C-270 27 @1.0 kHz M 0.15 1.02 D75C-330 33 @1.0 kHz M 0.17 0.84 D75C-390 39 @1.0 kHz M 0.18 0.8 D75C-470 47 @1.0 kHz M 0.2 0.76 D75C-560 56 @1.0 kHz M 0.28 0.64 D75C-680 68 @1.0 kHz M 0.32 0.6 D75C-820 82 @1.0 kHz M 0.35 0.57 D75C-101 100 @1.0 kHz M 0.4 0.5 D75C-121 120 @1.0 kHz M 0.44 0.47 D75C-151 150 @1.0 kHz M 0.73 0.4 D75C-181 180 @1.0 kHz M 0.78 0.39 D75C-221 220 @1.0 kHz M 0.94 0.33 D75C-271 270 @1.0 kHz M 1.25 0.31 D75C-331 330 @1.0 kHz M 1.4 0.28 D75C-391 390 @1.0 kHz M 1.52 0.27 D75C-471 470 @1.0 kHz M 1.7 0.25 D75C-561 560 @1.0 kHz M 2.39 0.22 SPECIFICATION TYPE = D75C CONSTRUCTION = SURFACE MOUNT POWER INDUCTOR TERMINAL COATING = NICKEL ALLOY OVER PHOS BRONZE OPERATING TEMP. = -40 TO +85 C STORAGE TEMP = -55 TO +125 C INSULATION RESISTANCE = 100MOhm. 100V TERMINAL-CORE DIELECTRIC STRENGTH = 250Vac TERMINAL-CORE HUMIDITY EFFECTS = L 5 @ 95%RH, 40 C, 1HR Q 5 @ 95%RH, 40 C, 1HR PACKAGING = 1000PCS/REEL MARKING = 3 CHARACTERS, VALUE NOTE TOLERANCE M=20%. 7.0 7.0 4.5 L 1.5 4.9 1.5 2.2 Part PROPRIETARY AND CONFIDENTIAL NAME DATE DRAWN THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE CHECKED WEB-SITE DATA SHEET PROPERTY OF AIT COMPONENTS LTD ENG APPR. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT UNLESS OTHERWISE SPECIFIED THE WRITTEN PERMISSION OF DIMENSIONS ARE IN MILLIMETERS AIT COMPONENTS LTD IS TOLERANCES: STRICTLY PROHIBITED. ONE PLACE DECIMAL +/-0.3 MATERIAL TWO PLACE DECIMAL +/-0.13 -ANGLE +/-1 DEGREE FINISH -- DO NOT SCALE DRAWING AIT Components Ltd. www.aitcomponents.com TITLE: D75C COMPACT SMD POWER INDUCTOR WITH SHIELD SIZE A DWG. NO. SCALE:1:1 REV. 00 D75C_AIT_WEB REV '0' = PRELIMINARY DATA SHEET 1 OF 1