DRD4350A40 Rectifier Diode DS5985-1 January 2011 (LN28006) FEATURES KEY PARAMETERS Double Side Cooling High Surge Capability VRRM IF(AV) IFSM 4000V 4346A 83000A APPLICATIONS Rectification Free-wheel Diode DC Motor Control Power Supplies Welding Battery Chargers VOLTAGE RATINGS Part and Ordering Number Repetitive Peak Voltages VDRM and VDRM V DRD4350A40 DRD4350A39 DRD4350A38 DRD4350A37 DRD4350A36 DRD4350A35 4000 3900 3800 3700 3600 3500 Conditions VRSM = VRRM+100V Lower voltage grades available. ORDERING INFORMATION When ordering, select the required part number shown in the Voltage Ratings selection table. For example: Outline type code: A (See Package Details for further information) Fig. 1 Package outlines DRD4350A39 Note: Please use the complete part number when ordering and quote this number in any future correspondence relating to your order. 1/8 www.dynexsemi.com DRD4350A40 SEMICONDUCTOR CURRENT RATINGS Tcase = 75°C unless stated otherwise Symbol Parameter Test Conditions Max. Units 5651 A Double Side Cooled IF(AV) Mean forward current IF(RMS) RMS value - 8877 A Continuous (direct) on-state current - 8208 A 3707 A IF Half wave resistive load Single Side Cooled (Anode side) IF(AV) Mean forward current IF(RMS) RMS value - 5821 A Continuous (direct) on-state current - 4976 A Test Conditions Max. Units 4350 A IF Half wave resistive load Tcase = 100°C unless stated otherwise Symbol Parameter Double Side Cooled IF(AV) Mean forward current IF(RMS) RMS value - 6830 A Continuous (direct) on-state current - 6160 A 2795 A IF Half wave resistive load Single Side Cooled (Anode side) IF(AV) Mean forward current IF(RMS) RMS value - 4390 A Continuous (direct) on-state current - 3640 A IF Half wave resistive load 2/8 www.dynexsemi.com DRD4350A40 -3SEMICONDUCTOR SURGE RATINGS Symbol IFSM 2 It IFSM 2 It Parameter Surge (non-repetitive) on-state current 2 I t for fusing Surge (non-repetitive) on-state current Test Conditions Max. Units 10ms half sine, Tcase = 150°C 66.5 kA VR = 50% VRRM - ¼ sine 22 MA s 10ms half sine, Tcase = 150°C 83 kA VR = 0 34.5 MA s Min. Max. Units 2 I t for fusing 2 2 THERMAL AND MECHANICAL RATINGS Symbol Rth(j-c) Rth(c-h) Parameter Thermal resistance – junction to case Thermal resistance – case to heatsink Test Conditions Double side cooled DC - 0.0065 °C/W Single side cooled Anode DC - 0.013 °C/W Cathode DC - 0.013 °C/W Double side - 0.001 °C/W - 0.002 °C/W On-state (conducting) - 160 °C Reverse (blocking) - 150 °C Clamping force 83.0kN (with mounting compound) Tvj Virtual junction temperature Single side Tstg Storage temperature range -55 150 °C Fm Clamping force 75.0 91.0 kN CHARACTERISTICS Symbol Parameter Test Conditions Min. Max. Units VFM Forward voltage At 3000A peak, Tcase = 25°C - 1.06 V IRM Peak reverse current At VDRM, Tcase = 150°C - 400 mA VTO Threshold voltage At Tvj = 150°C - 0.78 V rT Slope resistance At Tvj = 150°C - 0.0763 m 3/8 www.dynexsemi.com DRD4350A40 SEMICONDUCTOR CURVES Fig.2 Maximum (limit) forward characteristics VTM EQUATION VTM = A + Bln (IT) + C.IT+D.IT Fig.3 Power loss curves Where A = - 0.01591 B = 0.113682 -5 C = 8.04 x 10 D = - 0.00284 these values are valid for Tj = 150°C for IF 500A to 7000A 4/8 www.dynexsemi.com DRD4350A40 -5SEMICONDUCTOR Fig.4 Stored charge Fig.5 Reverse recovery current 90 Conditions : Tcase = 150ºC VR = 0 Pulse width = 10ms 80 Surge current FISM - (kA) 70 60 50 40 30 20 10 0 1 10 100 Number of pulses Fig.6 Maximum (limit) transient thermal impedance – junction to case Fig.7 Multi-cycle surge current 5/8 www.dynexsemi.com DRD4350A40 SEMICONDUCTOR 80 Conditions: T case = 150ºC VR = 0 half sine wave Surge current, FI SM - (kA) 120 70 100 60 80 50 60 40 40 30 20 20 0 1 10 I2t value - (MA2s) 140 10 100 Pulse width, tp - (ms) Fig.8 Sub-cycle surge current 6/8 www.dynexsemi.com DRD4350A40 -7SEMICONDUCTOR PACKAGE DETAILS For further package information, please contact Customer Services. All dimensions in mm, unless stated otherwise. DO NOT SCALE. 7/8 www.dynexsemi.com DRD4350A40 SEMICONDUCTOR IMPORTANT INFORMATION: This publication is provided for information only and not for resale. The products and information in this publication are intended for use by appropriately trained technical personnel. Due to the diversity of product applications, the information contained herein is provided as a general guide only and does not constitute any guarantee of suitability for use in a specific application.The user must evaluate the suitability of the product and the completeness of the product data for the application. The user is responsible for product selection and ensuring all safety and any warning requirements are met. Should additional product information be needed please contact Customer Service. Although we have endeavoured to carefully compile the information in this publication it may contain inaccuracies or typographical errors. The information is provided without any warranty or guarantee of any kind. This publication is an uncontrolled document and is subject to change without notice. When referring to it please ensure that it is the most up to date version and has not been superseded. The products are not intended for use in applications where a failure or malfunction may cause loss of life, injury or damage to property. The user must ensure that appropriate safety precautions are taken to prevent or mitigate the consequences of a product failure or malfunction. The products must not be touched when operating because there is a danger of electrocution or severe burning. Always use protective safety equipment such as appropriate shields for the product and wear safety glasses. Even when disconnected any electric charge remaining in the product must be discharged and allowed to cool before safe handling using protective gloves. Extended exposure to conditions outside the product ratings may affect reliability leading to premature product failure. Use outside the product ratings is likely to cause permanent damage to the product. In extreme conditions, as with all semiconductors, this may include potentially hazardous rupture, a large current to flow or high voltage arcing, resulting in fire or explosion. Appropriate application design and safety precautions should always be followed to protect persons and property. Product Status & Product Ordering: We annotate datasheets in the top right hand corner of the front page, to indicate product status if it is not yet fully approved for production. The annotations are as follows:Target Information: Preliminary Information: No Annotation: This is the most tentative form of information and represents a very preliminary specification. No actual design work on the product has been started. The product design is complete and final characterisation for volume production is in progress.The datasheet represents the product as it is now understood but details may change. The product has been approved for production and unless otherwise notified by Dynex any product ordered will be supplied to the current version of the data sheet prevailing at the time of our order acknowledgement. All products and materials are sold and services provided subject to Dynex’s conditions of sale, which are available on request. Any brand names and product names used in this publication are trademarks, registered trademarks or trade names of their respective owners. HEADQUARTERS OPERATIONS CUSTOMER SERVICE DYNEX SEMICONDUCTOR LIMITED Doddington Road, Lincoln, Lincolnshire, LN6 3LF United Kingdom. Phone: +44 (0) 1522 500500 Fax: +44 (0) 1522 500550 Web: http://www.dynexsemi.com Phone: +44 (0) 1522 502753 / 502901 Fax: +44 (0) 1522 500020 e-mail: [email protected] Dynex Semiconductor Ltd. Technical Documentation – Not for resale. 8/8 www.dynexsemi.com