Clock Oscillators Surface Mount Type KC5032A-CM Series CMOS/ 1.8V, 2.5V, 3.3V, 5.0V/ 5.0×3.2mm Features • Wide operating voltage range 1.6 to 5.5V • ±25×10-6 available • Highly reliable with seam welding • Miniature ceramic package • CMOS output Table 1 Operating Freq. Tol. Temperature Note Code × 10-6 Range (°C) ± 50 0 Standard specifications ± 30 -10 to +70 S ± 25 U With only certain frequencies ±100 F -40 to +85 ± 50 S RoHS Compliant How to Order KC5032A 25.0000 C M 0 E 00 ① ② ③④⑤⑥ ⑦ ① Type (5.0×3.2mm SMD) ② Output Frequency ③ Output Type (CMOS) ④ Supply Voltage (1.8V, 2.5V, 3.3V, 5V Compatible) ⑤ Frequency Tolerance (See Table 1) ⑥S ymmetry/ INH Function (45/ 55%, Stand-by) ⑦C ustomer Special Model Suffix (STD Specification is “00”) P ackaging (Tape & Reel 1000 pcs./ reel) Specifications Item Output Frequency Range Symbol fo Frequency Tolerance Storage Temperature Range Operating Temperature Range Max. Supply Voltage Supply Voltage Current Consumption Stand-by Current Symmetry Rise/ Fall Time (10% VCC to 90% VCC Maximum Loaded) Low Level Output Voltage High Level Output Voltage Output Load Input Voltage Range Low Level Input Voltage High Level Input Voltage Disable Time Enable Time Start-up Time 1 Sigma Jitter Conditions Min. 1.789 -100 Initial tolerance, Operating tempera- Op. Temp.: -40 to +85°C -50 ture range, Rated power supply volt- Op. Temp.: -10 to +70°C/ -40 to +85°C f_tol age change, Load change, Aging (1 Op. Temp.: -10 to +70°C -30 year @25°C), Shock and vibration -25 Op. Temp.: -10 to +70°C -55 T_stg -40 T_use -0.5 — +1.6 VCC — 1.6≤VCC≤2V 2<VCC≤2.8V — ICC 2.8<VCC≤3.63V — 4.5≤VCC≤5.5V — I_std — SYM @50% VCC 45 — 1.6≤VCC≤2V 2<VCC≤2.8V — tr/ tf 2.8<VCC≤3.63V — 4.5≤VCC≤5.5V — VOL — VOH 90% VCC — 1.6≤VCC≤3.63V L_CMOS 4.5≤VCC≤5.5V — VIN 0 VIL — VIH 70% VCC t_dis — t_ena — t_str @Minimum operating voltage to be 0 sec. — JSigma Max. 50 +100 +50 +30 +25 +125 +85 +6.5 +5.5 5 6 7 9.5 10 55 8 7 6 5 10% VCC — 15 50 VCC 30% VCC — 150 5 10 Units MHz — 8 ps — 80 ps ×10-6 °C °C V V mA μA % ns V V pF V V V ns ms ms Measured with Wavecrest DTS-2079 VISI 6.3.1 Peak to Peak Jitter JPK-PK Note: All electrical characteristics are defined at the maximum load and operating temperature range. Please contact us for inquiry about operating temperature range, available frequencies and other conditions. Dimensions (Unit: mm) 3.2 1.4 Plating: Ni+Au Tolerance: ±0.2 0.9 #2 #1 1.2 0.1 1.2 #3 #4 (Unit: mm) 2.5 2.2 0 .5 5.0 Recommended Land Pattern 1.0 0.5 2.5 Pad Connections #1 INH #2 Case GND #3 Output #4 VCC INH Function Pad1 Pad3 (Output) Open Active "H" Level Active "L" Level High Z (No-Oscillation) 1.6 Note: A capacitor of value 0.01µF between VCC and GND is recommended.