Surface Mount Two-Way Power Divider 10 - 500 MHz DSS-333 V2.00 SF-1 Features ● ● ● ● Fully Hermetic Package 0.5° Typical Phase Balance 40 dB Typical Midband Isolation 1.05:1 Typical Midband VSWR Guaranteed Specifications* 0.016 W±0.002 (0.41±0.5) X 0.010 T±0.001 (0.25±0.03) GROUND TAB ORIENTATION MARK 1 0.060 (1.52) 2 0.385±0.020 (9.8±0.5) (From -55°C to +85°C) Frequency Range Insertion Loss (Less coupling) 10-500 MHz 3 0.072 (1.83) 0.205 (5.21) 10-500 MHz 0.305 (7.75) 0.422 (10.72) 0.510±0.20 (12.9±0.5) 0.6 dB Max Isolation 25 dB Min Amplitude Balance 10-500 MHz 4 0.170 (4.31) MAX 0.15 Max Phase Balance 2° Max VSWR (All Ports) 10-500 MHz 1.4:1 Max Operating Characteristics WEIGHT (APPROX ) 0 07 OUNCES 2 GRAMS Dimensions in ( ) are in mm. Unless Otherwise Noted: .xxx = ±0.010 (.xx = ±0.25) WEIGHT (APPROX.): 0.07 OUNCES 2 GRAMS Typical Performance Impedance 50 Ohms Nominal Maximum Power Rating Or Input Power INSERTION LOSS 1 Watt Max Internal Load Dissipation 0.05 Watts Max Environmental MIL-STD-202 screening available. Pin Configuration Σ IN P1, Output C; P2 Output D; P4 Case and all other pins ground. * All specifications apply with 50 ohm source and load impedance. ISOLATION Ordering Information Model No. DS-333 PIN Package Surface Mount VSWR Specifications Subject to Change Without Notice. M/A-COM, Inc. North America: 1 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020