Two-Way Power Divider 400 kHz - 400 MHz DS-/DSS-113 V2.00 Features: ● ● ● ● FP-2 Fully Hermetic Package (DSS-113) Three Decade Bandwidth Low Loss: 0.25dB Typically MIL-STD-202 Screening Available Guaranteed Specifications* PIN 0.015 DIA ±0.005 (0.38 ±0.13) 8 PLACES (From -55°C to +85°C) DS-113 0.312 MIN TYP (7.9 MIN) 1 2 3 4 5 6 7 8 0.385 ±0.020 (9.8 ±0.5) DSS-113 Frequency Range 0.4 - 400 Insertion Loss (Less Coupling) 0.75 0.4 - 400 MHz Isolation 25 Amplitude Balance 0.15 0.15 dB Max. Phase Balance 1.0° 1.5° Max. VSWR (All Ports) 1.5:1 1.6:1 Max. 0.75 dB Max. 0.080 (2.0) 0.100 (2.5) 0.250 (6.3) 25 dB Min. 0.350 (8.9) 0.51 (12.9 ±0.5) 0.150 MAX (3.8 MAX) 0.060 (1.5) Operating Characteristics Impedance 50 Ohms Nominal Maximum Power Rating or Input Power 1 W. Max. Internal Load Dissipation Dimensions in ( )inare in mm. Dimensions ( ) are in mm. Unless Otherwise Noted: .xxx = ±0.010 (.xx = ±0.25) .xx = ±0.02 (.x = ±0.5) WEIGHT (APPROX.): 0.09 OUNCES 2.5 GRAMS 0.05 W. Max. Pin Configuration SF-1 DS-113 DSS-113S Σ P1 P1 Output ‘C’ P4 P2 Output ‘D’ P8 P4 0.016 W±0.002 (0.41±0.5) x 0.010 T±0.001 (0.25±0.03) GROUND TAB ORIENTATION MARK 0.060 (1.52) 1 2 Case and all other pins ground. 0.385±0.020 (0.8±0.5) Ordering Information Part Number DS-113 PIN DSS-113 PIN 3 Package FP-2 Flatpack SF-1 Surface Mount *All specifications apply with 50 ohm source and load impedance. 4 0.072 (1.83) 0.205 (5.21) 0.422 (10.72) 0.510±0.20 (12.9±0.5) 0.170 (4.31) MAX Dimensions in ( ) are in mm. Unless Otherwise Noted: .xxx = ±0.010 (.xx = ±0.25) WEIGHT (APPROX.): 0.07 OUNCES 2 GRAMS Specifications Subject to Change Without Notice. M/A-COM, Inc. North America: 1 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020 DS-/DSS-113 Two-Way Power Divider V2.00 Typical Performance INSERTION LOSS ISOLATION INPUT VSWR OUTPUT VSWR Specifications Subject to Change Without Notice. M/A-COM, Inc. 2 North America: Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020