T-1 (3mm) SOLID STATE LAMP Part Number: WP710A10SGD5V Super Bright Green Features Description z Low power consumption. The Super Bright Green source color devices are made with z Popular T-1 diameter package. Gallium Phosphide Green Light Emitting Diode. z General purpose leads. z Reliable and rugged. z Long life - solid state reliability. z Available on tape and reel. z 5V internal resistor. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAL0546 REV NO: V.4B DATE: MAR/21/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101029231 Selection Guide Part No. Dice WP710A10SGD5V Lens Type Super Bright Green (GaP) Green Diffused Viewing Angle [1] Iv (mcd) [2] V= 5V Min. Typ. 2θ1/2 10 25 40° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 565 nm VF=5V Super Bright Green 568 nm VF=5V Spectral Line Half-width Super Bright Green 30 nm VF=5V IF Forward Current Super Bright Green 11.5 17.5 mA VF=5V IR Reverse Current Super Bright Green 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2.Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Green Units Power dissipation 85 mW Forward Voltage 6 V Reverse Voltage 5 V Operating Temperature -40°C To +70°C Storage Temperature -40°C To +85°C Lead Solder Temperature [1] 260°C For 3 Seconds Lead Solder Temperature [2] 260°C For 5 Seconds Notes: 1. 2mm below package base. 2. 5mm below package base. SPEC NO: DSAL0546 REV NO: V.4B DATE: MAR/21/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101029231 Super Bright Green WP710A10SGD5V SPEC NO: DSAL0546 REV NO: V.4B DATE: MAR/21/2013 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101029231 PACKING & LABEL SPECIFICATIONS WP710A10SGD5V SPEC NO: DSAL0546 REV NO: V.4B DATE: MAR/21/2013 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101029231 SPEC NO: DSAL0546 REV NO: V.4B DATE: MAR/21/2013 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101029231 All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAL0546 REV NO: V.4B DATE: MAR/21/2013 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101029231 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Kingbright: WP710A10SGD5V