T-1 (3mm) SOLID STATE LAMP Part Number: WP132XPGC Pure Green Features Description z Low power consumption. The Pure Green source color devices are made with Gal- z Popular T-1 diameter package. lium Phosphide Pure Green Light Emitting Diode. z General purpose leads. z Reliable and rugged. z Long life-solid state reliability. z Available on tape and reel. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAF2134 REV NO: V.4B DATE: FEB/19/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1101001121 Selection Guide Part No. Dice WP132XPGC Iv (mcd) [2] @ 10mA Lens Type Pure Green (GaP) Viewing Angle [1] Min. Typ. 2θ1/2 6 15 50° Water Clear Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Pure Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 557 nm IF=20mA Pure Green 557 nm IF=20mA Spectral Line Half-width Pure Green 30 nm IF=20mA C Capacitance Pure Green 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Pure Green 2.25 2.5 V IF=20mA IR Reverse Current Pure Green 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Parameter Pure Green Units 62.5 mW DC Forward Current 25 mA Peak Forward Current [1] 135 mA 5 V Power dissipation Reverse Voltage Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF2134 REV NO: V.4B DATE: FEB/19/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1101001121 Pure Green WP132XPGC SPEC NO: DSAF2134 REV NO: V.4B DATE: FEB/19/2013 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1101001121 PACKING & LABEL SPECIFICATIONS WP132XPGC SPEC NO: DSAF2134 REV NO: V.4B DATE: FEB/19/2013 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1101001121 SPEC NO: DSAF2134 REV NO: V.4B DATE: FEB/19/2013 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1101001121 All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAF2134 REV NO: V.4B DATE: FEB/19/2013 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1101001121