Tyco / Electronics PolySwitch® PTC Devices Raychem Circuit Protection 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 Fax: 800-227-4866 Overcurrent Protection Device PRODUCT: nanoSMDC016F DOCUMENT: SCD 26095 PCN: C82021 REV LETTER: B REV DATE: MAY 11, 2006 PAGE NO.: 1 OF 1 Specification Status: Released Maximum Electrical Rating Voltage: 48VDC MAX Short Circuit Current: 10A Notes: 1. All terminations are tin plated. 2. Drawing not to scale Marking: TABLE I. DIMENSIONS: mm: in: A B C D E MIN MAX MIN MAX MIN MAX MIN MAX MIN 3.00 3.40 0.62 1.00 1.37 1.80 0.25 0.75 0.076 (0.118) (0.134) (0.024) (0.039) (0.054) (0.071) (0.010) (0.030) (0.003) TABLE II. PERFORMANCE RATINGS: CURRENT RATINGS** TIME TO TRIP** AMPERES AMPERES AMPERES SECONDS AT 0°C AT 25°C AT 60°C AT 25°C, 1.0A HOLD TRIP HOLD TRIP HOLD TRIP MAX 0.18 0.70 0.16 0.45 0.12 0.28 0.3 RESISTANCE VALUES OHMS AT 25°C MIN MAX* 1.1 5.0 TRIPPED-STATE POWER DISSIPATION** WATTS AT 25°C, 48V MAX 0.5 * Resistance is measured 1 hour after reflow. ** Values specified were determined using PCB’s with 0.030”X1.5 ounce copper traces. Agency Recognitions: Reference Documents: Precedence: Effectivity: CAUTION: UL, CSA PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. Materials Information ROHS Compliant ELV Compliant © 2006 Tyco Electronics Corporation. All rights reserved. Pb-Free