PolySwitch® PTC Devices 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 www.circuitprotection.com PRODUCT: microSMD200F Overcurrent Protection Device DOCUMENT: SCD 25271 REV LETTER: F REV DATE: MARCH 6, 2009 PAGE NO.: 1 OF 1 Raychem Circuit Protection Products Specification Status: Released Maximum Electrical Rating Voltage: 6.0VDC Short Circuit Current: 100A Notes: 1. All terminations are tin plated. 2. Drawing not to scale Marking: TABLE I. DIMENSIONS: mm: in: A B C D E MIN MAX MIN MAX MIN MAX MIN MAX MIN 3.00 3.43 0.79 1.17 2.35 2.80 0.25 0.75 0.076 (0.118) (0.135) (0.031) (0.046) (0.092) (0.110) (0.010) (0.030) (0.003) TABLE II. PERFORMANCE RATINGS: CURRENT RATINGS** TIME TO TRIP** RESISTANCE VALUES AMPERES AMPERES AMPERES SECONDS AT 0°C AT 20°C AT 60°C AT 20°C, 8.0A HOLD TRIP HOLD TRIP HOLD TRIP MAX 2.35 4.7 2.0 4.0 1.5 3.0 2.5 OHMS AT 20°C MIN MAX* 0.02 0.06 TRIPPED-STATE POWER DISSIPATION** WATTS AT 20°C, 6.0V MAX 0.8 * Maximum resistance is measured 1 hour after reflow. ** Values specified were determined using PCB’s with 0.030” x 1.5 ounce copper traces. Agency Recognition: Reference Documents: Precedence: Effectivity: CAUTION: UL, CSA, TUV PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. Materials Information ROHS Compliant ELV Compliant Pb-Free Halogen Free* HF * Halogen Free refers to: Br≤900ppm, Cl≤900ppm, Br+Cl≤1500ppm © 2008, 2009 Tyco Electronics Corporation. All rights reserved.