Bulletin U2788 rev. G 04/03 DF SERIES 1A Single Phase D.I.L. Rectifier Bridge Features • Glass passivated chips • Leads on standard 0.1" grid • Suitable for automatic insertion • High surge current capability • Fully characterised data • Wide temperature range • Surface mount option • Lead free terminals solderable as per MIL-STD-750 Method 2026 • High temperature soldering guaranteed 260°C/8-10 secs • Polarity symbols marked on the case • UL E160375 approved IO(av) = 1.0 A + IO(av) ~ VRRM range - ~ 50 to 1000V Description The DF Series of Single Phase Rectifier Bridges consists of four silicon junctions encapsulated in a 4 pin D.I.L. package. These devices are intended for general use in industrial and consumer equipment. Electrical Specification DF... IO IFSM Units Conditions Maximum DC output 1.0 A Tamb = 40oC, Resistive or inductive load current 0.8 A Tamb = 40oC, Capacitive load Maximum peak one 30 A t = 10ms, 20ms Following any rated cycle, non-repetitive 31 A t = 8.3ms, 16.7ms load condition and with Maximum I2t capability 4.5 A2s t = 10ms Initial TJ = TJ max for fusing 4.1 6.4 A2s A2s t = 8.3ms t = 10ms 100% VRRM reapplied Initial TJ = TJ max no voltage reapplied surge current I2t I2√t Maximum I2√t rated VRRM reapplied 5.8 A2s t = 8.3ms 64 A2√s t = 0.1 to 10ms, no voltage reapplied 1.0 V capability for fusing VFM Maximum peak forward IFM = 1.0A, TJ = 25oC voltage per diode IRM Typical peak reverse leakage per diode f Operating frequency 5 µA TJ = 25oC, 100% VRRM 100 µA TJ = 150oC, 100% VRRM 50 to 1000 Hz 50 to 1000 V range VRRM Maximum repetitive peak reverse voltage range Thermal and Mechanical Specifications DF... TJ Operating and storage Tstg temperature range RthJA Thermal resistance, - 55 to 150 Units Conditions o C 60 K/W 0.6 (0.02) g (oz) junctions to ambient W Approximate weight www.irf.com 1 DF SERIES Bulletin U2788 rev. G 04/03 Voltage Specifications Part Number VRRM. Maximum repetitive peak reverse voltage V VRSM. Maximum nonrepetitive peak reverse voltage V DF005M/DF005S DF01M/DF01S DF02M/DF02S DF04M/DF04S DF06M/DF06S DF08M/DF08S DF10M/DF10S 50 100 200 400 600 800 1000 80 150 300 500 700 900 1100 2.0 DF... Per Junction 10 Tj = 150˚C Tj = 25˚C 1 Maximum Total Power Loss (W) Instantaneous Forward Current (A) 100 1.4 1.2 = 180˚ 1.0 0.8 0.6 0.4 0.2 0.1 0 DF... 1.8 1.6 0 0.4 0.8 1.2 1.6 2.0 Instantaneous Forward Voltage (V) 0 Fig. 1 - Forward Characteristics Average Output Current (A) 0.9 Resistive Load 0.8 0.7 0.6 0.5 0.4 Capacitive Load 0.3 0.2 0.1 0 2 0 20 40 60 80 100 120 140 160 Maximum Allowable Ambient Temperature (°C) Fig. 3 - Current Ratings Maximum Peak Surge Current (A) DF... 0.4 0.6 0.8 1.0 Fig. 2 - Power Loss Characteristics 1.1 1.0 0.2 Average Output Current (A) 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 0 DF... 50Hz 10 -2 -1 10 1 Pulse Train Duration (s) 10 Fig. 4 - Non-Repetititive Surge Ratings www.irf.com DF SERIES Bulletin U2788 rev. G 04/03 DF..S DF..M 9a 9b + 6.40(0.252) 6.10(0.240) 8.13(0.320) 8.38(0.330) 6.40(0.252) 7.11(0.280) 7.62(0.300) 6.10(0.240) + 8.40(0.331) 8.40(0.331) 8.10(0.319) 8.10(0.319) 3.30(0.130) 3.10(0.122) 3.30(0.130) 5.10(0.201) Max. 10.4 (0.409) Max. 0.30(0.012) Max. 3.10(0.122) 2.80(0.110) 1.60(0.063) 1.2(0.047) 1.0(0.040) 1.2(0.047) 1.0(0.040) 0.51(0.020) 0.41(0.016) 1.40(0.055) 1.14(0.045) 1.40(0.055) 1.14(0.045) 5.33(0.210) 5.33(0.210) 4.83(0.210) 4.83(0.210) Tape Reel Tape Reel Dimensions for DF15...TRR16 0.35(0.014) 4.10(0.161) 0.25(0.010) 3.90(0.154) 2.1(0.083) 1.9(0.075) 1.60(0.063) 1.50(0.060) dia. 7.6(0.299) 7.4(0.291) 16.3(0.642) 15.7(0.618) 10.70(0.421) 12.10(0.476) 11.90(0.469) 5o 3.8(0.150) 8.7(0.343) Tape Colour - Black Footprint and Pad Dimensions 2.00(0.079) 1.5(0.059) 3.50(0.138) 330(12.99) 3.5(0.138) 1.5(0.059) 2.0(0.079) 8.0(0.315) 16.0(0.630) 2.0(0.079) Unreel Direction Identification Label All dimensions in millimetres(inches) www.irf.com 3 DF SERIES Bulletin U2788 rev. G 04/03 Ordering Information Table Device Code DF 10 S 1 2 3 1 - Basic Part Number 2 - Voltage Code: Code x 100 = VRRM 3 - Terminal Type: M S = hole mount = surface mount To specify tape reel option add ' TRR16' suffix. e.g. DF10STRR16 Data and specifications subject to change without notice. This product has been designed and qualified for Multiple Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 04/03 4 www.irf.com