RLT1060M-1WG TECHNICAL DATA High Power Infrared Laser Diode High power, multi mode, broad stripe laser diode, featuring high reliability and long lifetime. Suitable for many applications including medical laser therapy and defense Features • • • • Lasing Mode Structure: multi mode Peak Wavelength : typ. 1060 nm Optical Ouput Power: 1W Package: TO 9 mm Electrical Connection Pin Configuration Bottom View n-type PIN 1 2 3 Function LD Cathode LD Anode, PD Anode PD Anode Absolute Maximum Ratings (TC=25°C) Item CW Output Power Operating Case Temperature Storage Temperature Symbol PO TC Tstg Value 1000 -20 … +50 -40 … +85 Unit mW °C °C Specifications (TC=25°C) Item Optical Specification CW Output Power Peak Wavelength Spectral Width (FWHM) Far Field (FWHM) Emitting Aperature Lifetime Electrical Specification Threshold Current Operating Current Slope Efficiency Operating Voltage Photodiode Current Symbol Min. Typ. Max. Unit PO λP Δλ θ║ θ┴ WxH 1055 - 1069 5 11 35 10000 1000 1060 3 8 30 100 x 1 - - mW nm nm deg deg µm h 0.8 0.5 0.3 1.4 0.9 1.3 0.7 0.6 1.6 1.6 0.9 mA A W/A V mA Ith Iop η Uop IPD The above specifications are for reference purpose only and subjected to change without prior notice. 10.05.2012 RLT1060M-1WG 1 of 4 Package Dimensons 9 mm Package (Unit:mm) 10.05.2012 RLT1060M-1WG 2 of 4 Typical Performance Characteristics Operation Current vs. Output Power Operation Current vs. Operation Voltage 10.05.2012 RLT1060M-1WG 3 of 4 Safety of Laser light • Laser Light can damage the human eyes and skin. Do not expose the eye or skin directly to any laser light and/or through optical lens. When handling the LDs, wear appropriate safety glasses to prevent laser light, even any reflections from entering to the eye. Focused laser beam through optical instruments will increase the chance of eye hazard. • WARNING: Laserdiode is emitting invisible light Cautions 1. Operating methode • This LD shall change its forward voltage requirement and optical ouput power according to temperature change. Also, the LD will require more operation current to maintain same ouput power as it degrades. • Confirm that electrical spike current generated by switching on and off does not exceed the maximum operating current level specified herein above as absolute maximum rating. Also, employ appropriat countermeasures to reduce chattering and/or overshooting in the circuit. 2. Static Electricity • Static electricity or electrical surges will reduce and degrade the reliability of the LDs. It is recommended to use a wrist trap or anti-electrostatic glove when handling the product. 3. Absolute Maximum Rating • Active layer of LDs shall have high current density and generate high electric field during its operation. In order to prevent excessive damage, the LD must be operated strictly below absolute maximum rating. 10.05.2012 RLT1060M-1WG 4 of 4