515D www.vishay.com Vishay Sprague Aluminum Capacitors + 85 °C, Miniature, Radial Lead FEATURES • High CV per case size • Low cost • Low profile ratings • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA RIPPLE CURRENT MULTIPLIERS DESCRIPTION TEMPERATURE VALUE Nominal case size Ø D x L in mm Operating temperature Rated capacitance range, CR 0.157" x 0.276" [4.0 x 7.0] to 0.709" x 1.575" [18.0 x 40.0] AMBIENT TEMPERATURE MULTIPLIERS + 70 °C 1.27 - 40 °C to + 85 °C - 25 °C to + 85 °C for 315 WVDC to 450 WVDC units + 85 °C 0.1 μF to 18 000 μF WVDC CAP. (μF) 0 to 47 0.75 1 1.35 1.57 2.00 6.3 to 100 100 to 470 0.80 1 1.23 1.34 1.50 ± 20 % Tolerance on CR Rated voltage range, UR 6.3 WVDC to 450 WVDC Termination 1.0 FREQUENCY (Hz) 50 TO 100 TO 300 TO 1 kHz 10 kHz 60 120 400 1000 to 18 000 0.85 2 radial leads 160 to 450 Life validation test at 85 °C 2000 h: CAP ± 20 % from initial measurement. DF 2 x initial specified limit. DCL initial specified limit. Shelf life at 85 °C 1000 h: CAP ± 20 % from initial measurement. DF 2 x initial specified limit. DCL initial specified limit. DC leakage current Rated voltage for 1 and 2 min for 6.3 WVDC to 100 WVDC units: I < 0.03 CV or 4 μA (whichever is greater). I < 0.04 CV or 3 μA (whichever is greater). Rated voltage for 1 min for 160 WVDC to 450 WVDC units: I < 0.1 CV + 40 μA and CV 1000; I < 0.04 CV + 100 μA and CV > 1000 0.47 to 220 0.80 1 1.10 1.13 1.15 1 1.25 1.40 1.60 LOW TEMPERATURE PERFORMANCE MAXIMUM IMPEDANCE RATIO Z(T)/Z(+ 20 °C) MAXIMUM AT 120 Hz RATED VOLTAGE (WVDC) Z - 25 °C/Z + 20 °C Z - 40 °C/Z + 20 °C 6.3 4.0 10.0 10.0 3.0 8.0 16.0 2.0 6.0 25.0 2.0 4.0 35.0 to 100.0 2.0 3.0 160.0 to 200.0 3.0 4.0 250.0 3.0 6.0 315.0 to 400.0 6.0 - 450.0 15.0 - DIMENSIONS in inches [millimeters] CASE CODE NOMINAL CASE SIZE DxL LEAD SPACING S NOMINAL LEAD DIAMETER D TYPICAL WEIGHT (g) HW 0.157 x 0.276 [4.0 x 7.0] 0.059 [1.5] 0.018 [0.45] 0.20 JW 0.197 x 0.276 [5.0 x 7.0] 0.079 [2.0] 0.018 [0.45] 0.30 AW 0.248 x 0.276 [6.3 x 7.0] 0.098 [2.5] 0.018 [0.45] 0.40 JA 0.197 x 0.433 [5.0 x 11.0] 0.079 [2.0] 0.020 [0.50] 0.44 AA 0.248 x 0.433 [6.3 x 11.0] 0.098 [2.5] 0.020 [0.50] 0.60 BB 0.315 x 0.453 [8.0 x 11.5] 0.138 [3.5] 0.024 [0.60] 0.95 Revision: 12-Jun-13 Document Number: 42052 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 515D www.vishay.com Vishay Sprague DIMENSIONS in inches [millimeters] CASE CODE NOMINAL CASE SIZE DxL LEAD SPACING S NOMINAL LEAD DIAMETER D TYPICAL WEIGHT (g) CC CD CG DG DK EK EN ER FR FV 0.394 x 0.492 [10.0 x 12.5] 0.394 x 0.630 [10.0 x 16.0] 0.394 x 0.787 [10.0 x 20.0] 0.492 x 0.787 [12.5 x 20.0] 0.492 x 0.984 [12.5 x 25.0] 0.630 x 0.984 [16.0 x 25.0] 0.630 x 1.240 [16.0 x 31.5] 0.630 x 1.398 [16.0 x 35.5] 0.709 x 1.398 [18.0 x 35.5] 0.709 x 1.575 [18.0 x 40.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.295 [7.5] 0.295 [7.5] 0.295 [7.5] 0.295 [7.5] 0.295 [7.5] 0.024 [0.60] 0.024 [0.60] 0.024 [0.60] 0.024 [0.60] 0.024 [0.60] 0.031 [0.80] 0.031 [0.80] 0.031 [0.80] 0.031 [0.80] 0.031 [0.80] 1.48 1.75 2.37 3.73 4.85 7.08 8.94 10.50 12.53 15.71 ELECTROLYTIC CAPACITOR WITH CUT OR FORMED LEADS in inches [millimeters] 0.177 [4.5] Code S Code F X 0.177 [4.5] 0.197 ± 0.20 F (1) [5.0 ± 0.5] D Ø d (2) Code S 0.033 ± 0.006 [0.85 ± 0.15] Ø d (2) 0.197 ± 0.20 [5.0 ± 0.5] Ø d (2) Code S S ± 0.20 [0.5] D F (1) D Ø d (2) 0.177 [4.5] Code C 0.177 [4.5] X 0.197 ± 0.20 F (1) [5.0 ± 0.5] D Code S 0.039 ± 0.008 [1.0 ± 0.2] (10, 12.5, 16, 18) (4, 5, 6.3, 8) DIMENSIONS in inches [millimeters] FORMING METHOD FORMED LEAD CODE Formed and cut F Cut C Snap-in S D 0.157 [4.0] 0.197 [5.0] 0.248 [6.3] 0.315 [8.0] 0.394 [10.0] 0.492 [12.5] 0.630 [16.0] 0.709 [18.0] 0.157 [4.0] 0.197 [5.0] 0.248 [6.3] 0.315 [8.0] 0.394 [10.0] 0.492 [12.5] 0.630 [16.0] 0.709 [18.0] L.S. 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.295 [7.5] 0.295 [7.5] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.295 [7.5] 0.295 [7.5] DIMENSIONS P 0.059 [1.5] 0.079 [2.0] 0.098 [2.5] 0.138 [3.5] 0.059 [1.5] 0.079 [2.0] 0.098 [2.5] 0.138 [3.5] - e (3) 0.043 [1.1] 0.043 [1.1] 0.043 [1.1] 0.051 [1.3] 0.051 [1.3] 0.051 [1.3] 0.051 [1.3] 0.051 [1.3] X (Max.) 0.059 [1.5] 0.059 [1.5] 0.098 [2.5] 0.098 [2.5] 0.059 [1.5] 0.059 [1.5] 0.059 [1.5] 0.059 [1.5] - Notes • Coding of cut or formed lead to be added to the end of type number in 15th position (with position 14 coded “6”). (1) Formed lead. (2) Lead thickness Ø d depends on capacitor specification. (3) Lead protrusion at bottom of tape. Revision: 12-Jun-13 Document Number: 42052 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 515D www.vishay.com Vishay Sprague TAPED CAPACITORS FOR AUTOMATIC INSERTION SYSTEMS in inches [millimeters] PACKAGING SPECIFICATION LEAD CODE 14th AND 15th DIGITS OF PN LEAD STYLE 8P Formed lead (1) Ammo pack + LEAD SPACE - CAPACITOR SIZES AVAILABLE LEADER - 0.157 x 0.276 - 0.492 x 0.787 [4.0 x 7.0 - 12.5 x 20.0] 0.197 [5.0] Case codes HW, JW, AW, JA, AA, BB, CC, CD, DG Notes • The ammo pack code is to be added at the end of part number in the 14th and 15th position as 8P. To specify formed, cut or snap-in leads and for tape and ammo, both positions 14 and 15 of the type number must be filled in with the proper codes. (1) Except 0.394 [10.0 mm] and 0.492 [12.5 mm] diameter have straight unformed leads. TAPING SPECIFICATIONS in inches [millimeters] P Formed Lead Type K H H0 F W0 P0 W D0 Ød t DIMENSIONS in inches [millimeters] CASE SIZE (Diameter x Length) ITEM FORMED LEAD TYPE STRAIGHT LEAD TYPE 0.157 x 0.276 0.197 x 0.276 0.197 x 0.433 0.248 x 0.276 0.248 x 0.433 0.315 x 0.453 0.394 [10.0] [4.0 x 7.0] [5.0 x 7.0] [5.0 x 11.0] [6.3 x 7.0] [6.3 x 11.0] [8.0 x 11.5] (Dia.) 0.492 [12.5] (Dia.) Ø d - Lead-wire diameter 0.018 [0.45] 0.018 [0.45] 0.020 [0.5] 0.018 [0.45] 0.020 [0.5] 0.024 [0.6] 0.024 [0.6] 0.024 [0.6] P - Pitch of component 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.591 [15.0] P0 - Feed hole pitch 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.591 [15.0] F - Lead-to-lead distance 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] K - Clinch height 0.059 [1.5] 0.059 [1.5] 0.098 [2.5] 0.059 [1.5] 0.098 [2.5] 0.157 [4.0] - - H - Height of component 0.689 [17.5] 0.689 [17.5] 0.728 [18.5] 0.689 [17.5] 0.728 [18.5] 0.787 [20.0] 0.728 [18.5] 0.630 [16.0] H0 - Lead-wire clinch height 0.630 [16.0] 0.630 [16.0] 0.630 [16.0] 0.630 [16.0] 0.630 [16.0] 0.630 [16.0] - - W - Tape width 0.709 [18.0] 0.709 [18.0] 0.709 [18.0] 0.709 [18.0] 0.709 [18.0] 0.709 [18.0] 0.709 [18.0] 0.709 [18.0] W0 - Hold down tape width 0.512 [13.0] 0.512 [13.0] 0.512 [13.0] 0.512 [13.0] 0.512 [13.0] 0.512 [13.0] 0.512 [13.0] 0.512 [13.0] D0 - Feed hole diameter 0.157 [4.0] 0.157 [4.0] 0.157 [4.0] 0.157 [4.0] 0.157 [4.0] 0.157 [4.0] 0.157 [4.0] 0.157 [4.0] t - Total tape thickness 0.157 [4.0] 0.157 [4.0] 0.157 [4.0] 0.157 [4.0] 0.157 [4.0] 0.157 [4.0] 0.157 [4.0] 0.157 [4.0] Revision: 12-Jun-13 Document Number: 42052 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 515D www.vishay.com Vishay Sprague ORDERING EXAMPLE Electrolytic capacitor 515D series: 515D 107 M 6R3 JA 6 A E3 DESCRIPTION CODE 515D 107 M 6R3 JA 6 A E3 EXPLANATION Product type Capacitance value (100 μF) Tolerance (M = ± 20 %) Voltage rating at 85 °C (6R3 = 6.3 V) Can size (see Dimensions table) Packaging (bulk) Lead style (uncut) RoHS compliant indicator PACKING AND LEAD STYLES 6A 6C 6F 6S 8P Bulk, uncut leads Bulk, cut leads Bulk; formed and cut leads Bulk, snap-in leads Ammopack (case codes HW, JW, AW, JA, AA, BB, CC, CD, CG, DG only) ELECTRICAL DATA AND ORDERING INFORMATION CAPACITANCE (μF) 22.0 33.0 47.0 100.0 220.0 330.0 470.0 1000.0 2200.0 3300.0 4700.0 6800.0 10 000.0 15 000.0 18 000.0 22.0 33.0 47.0 100.0 220.0 330.0 470.0 1000.0 2200.0 3300.0 4700.0 6800.0 10 000.0 15 000.0 10.0 22.0 33.0 47.0 Revision: 12-Jun-13 PART NUMBER NOMINAL CASE SIZE DxL 6.3 WVDC AT + 85 °C, SURGE = 8 V 515D226M6R3JA6AE3 0.197 x 0.433 [5.0 x 11.0] 515D336M6R3JA6AE3 0.197 x 0.433 [5.0 x 11.0] 515D476M6R3JA6AE3 0.197 x 0.433 [5.0 x 11.0] 515D107M6R3JA6AE3 0.197 x 0.433 [5.0 x 11.0] 515D227M6R3AA6AE3 0.248 x 0.433 [6.3 x 11.0] 515D337M6R3AA6AE3 0.248 x 0.433 [6.3 x 11.0] 515D477M6R3BB6AE3 0.315 x 0.453 [8.0 x 11.5] 515D108M6R3CC6AE3 0.394 x 0.492 [10.0 x 12.5] 515D228M6R3DG6AE3 0.492 x 0.787 [12.5 x 20.0] 515D338M6R3DG6AE3 0.492 x 0.787 [12.5 x 20.0] 515D478M6R3EK6AE3 0.630 x 0.984 [16.0 x 25.0] 515D688M6R3EK6AE3 0.630 x 0.984 [16.0 x 25.0] 515D109M6R3EN6AE3 0.630 x 1.240 [16.0 x 31.5] 515D159M6R3FR6AE3 0.709 x 1.398 [18.0 x 35.5] 515D189M6R3FV6AE3 0.709 x 1.575 [18.0 x 40.0] 10 WVDC AT + 85 °C, SURGE = 13 V 515D226M010JA6AE3 0.197 x 0.433 [5.0 x 11.0] 515D336M010JA6AE3 0.197 x 0.433 [5.0 x 11.0] 515D476M010JA6AE3 0.197 x 0.433 [5.0 x 11.0] 515D107M010JA6AE3 0.197 x 0.433 [5.0 x 11.0] 515D227M010AA6AE3 0.248 x 0.433 [6.3 x 11.0] 515D337M010BB6AE3 0.315 x 0.453 [8.0 x 11.5] 515D477M010BB6AE3 0.315 x 0.453 [8.0 x 11.5] 515D108M010CD6AE3 0.394 x 0.630 [10.0 x 16.0] 515D228M010DG6AE3 0.492 x 0.787 [12.5 x 20.0] 515D338M010DK6AE3 0.492 x 0.984 [12.5 x 25.0] 515D478M010EK6AE3 0.630 x 0.984 [16.0 x 25.0] 515D688M010EN6AE3 0.630 x 1.240 [16.0 x 31.5] 515D109M010FR6AE3 0.709 x 1.398 [18.0 x 35.5] 515D159M010FV6AE3 0.709 x 1.575 [18.0 x 40.0] 16 WVDC AT + 85 °C, SURGE = 20 V 515D106M016JA6AE3 0.197 x 0.433 [5.0 x 11.0] 515D226M016JA6AE3 0.197 x 0.433 [5.0 x 11.0] 515D336M016JA6AE3 0.197 x 0.433 [5.0 x 11.0] 515D476M016JA6AE3 0.197 x 0.433 [5.0 x 11.0] MAX. RIPPLE AT + 85 °C 120 Hz (mA) MAX. DF AT + 20 °C 120 Hz 34.0 42.0 50.0 77.0 215.0 265.0 360.0 570.0 1050.0 1250.0 1700.0 1900.0 2250.0 2680.0 2750.0 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 38.0 47.0 59.0 145.0 230.0 330.0 390.0 630.0 1100.0 1400.0 1800.0 2150.0 2500.0 2720.0 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 28.0 44.0 57.0 168.0 0.16 0.16 0.16 0.16 Document Number: 42052 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 515D www.vishay.com Vishay Sprague ELECTRICAL DATA AND ORDERING INFORMATION CAPACITANCE (μF) PART NUMBER NOMINAL CASE SIZE DxL MAX. RIPPLE AT + 85 °C 120 Hz (mA) MAX. DF AT + 20 °C 120 Hz 16 WVDC AT + 85 °C, SURGE = 20 V 100.0 515D107M016AA6AE3 0.248 x 0.433 [6.3 x 11.0] 175.0 0.16 220.0 515D227M016BB6AE3 0.315 x 0.453 [8.0 x 11.5] 300.0 0.16 330.0 515D337M016BB6AE3 0.315 x 0.453 [8.0 x 11.5] 360.0 0.16 470.0 515D477M016CC6AE3 0.394 x 0.492 [10.0 x 12.5] 470.0 0.16 1000.0 515D108M016CG6AE3 0.394 x 0.787 [10.0 x 20.0] 790.0 0.16 2200.0 515D228M016DK6AE3 0.492 x 0.984 [12.5 x 25.0] 1350.0 0.16 3300.0 515D338M016EK6AE3 0.630 x 0.984 [16.0 x 25.0] 1700.0 0.16 4700.0 515D478M016EN6AE3 0.630 x 1.240 [16.0 x 31.5] 2100.0 0.16 6800.0 515D688M016FR6AE3 0.709 x 1.398 [18.0 x 35.5] 2500.0 0.16 10 000.0 515D109M016FV6AE3 0.709 x 1.575 [18.0 x 40.0] 2640.0 0.16 25 WVDC AT + 85 °C, SURGE = 32 V 4.7 515D475M025JA6AE3 0.197 x 0.433 [5.0 x 11.0] 30.0 0.14 10.0 515D106M025JA6AE3 0.197 x 0.433 [5.0 x 11.0] 33.0 0.14 22.0 515D226M025JA6AE3 0.197 x 0.433 [5.0 x 11.0] 51.0 0.14 33.0 515D336M025JA6AE3 0.197 x 0.433 [5.0 x 11.0] 63.0 0.14 47.0 515D476M025JA6AE3 0.197 x 0.433 [5.0 x 11.0] 115.0 0.14 100.0 515D107M025AA6AE3 0.248 x 0.433 [6.3 x 11.0] 185.0 0.14 220.0 515D227M025BB6AE3 0.315 x 0.453 [8.0 x 11.5] 320.0 0.14 330.0 515D337M025CC6AE3 0.394 x 0.492 [10.0 x 12.5] 420.0 0.14 0.14 470.0 515D477M025CD6AE3 0.394 x 0.630 [10.0 x 16.0] 540.0 1000.0 515D108M025DG6AE3 0.492 x 0.787 [12.5 x 20.0] 950.0 0.14 2200.0 515D228M025EK6AE3 0.630 x 0.984 [16.0 x 25.0] 1550.0 0.14 3300.0 515D338M025EN6AE3 0.630 x 1.240 [16.0 x 31.5] 1950.0 0.14 4700.0 515D478M025FR6AE3 0.709 x 1.398 [18.0 x 35.5] 2360.0 0.14 4.7 515D475M035JA6AE3 0.197 x 0.433 [5.0 x 11.0] 24.0 0.12 10.0 515D106M035JA6AE3 0.197 x 0.433 [5.0 x 11.0] 36.0 0.12 22.0 515D226M035JA6AE3 0.197 x 0.433 [5.0 x 11.0] 57.0 0.12 33.0 515D336M035JA6AE3 0.197 x 0.433 [5.0 x 11.0] 105.0 0.12 0.12 35 WVDC AT + 85 °C, SURGE = 44 V 47.0 515D476M035AA6AE3 0.248 x 0.433 [6.3 x 11.0] 140.0 100.0 515D107M035BB6AE3 0.315 x 0.453 [8.0 x 11.5] 230.0 0.12 220.0 515D227M035CC6AE3 0.394 x 0.492 [10.0 x 12.5] 370.0 0.12 330.0 515D337M035CD6AE3 0.394 x 0.630 [10.0 x 16.0] 490.0 0.12 470.0 515D477M035CG6AE3 0.394 x 0.787 [10.0 x 20.0] 640.0 0.12 1000.0 515D108M035DK6AE3 0.492 x 0.984 [12.5 x 25.0] 1100.0 0.12 2200.0 515D228M035EN6AE3 0.630 x 1.240 [16.0 x 31.5] 1850.0 0.12 3300.0 515D338M035FR6AE3 0.709 x 1.382 [18.0 x 35.5] 2220.0 0.12 4700.0 515D478M035FV6AE3 0.709 x 1.575 [18.0 x 40.0] 2490.0 0.12 50 WVDC AT + 85 °C, SURGE = 63 V 0.10 515D104M050JA6AE3 0.197 x 0.433 [5.0 x 11.0] 1.0 0.10 0.22 515D224M050JA6AE3 0.197 x 0.433 [5.0 x 11.0] 2.3 0.10 0.33 515D334M050JA6AE3 0.197 x 0.433 [5.0 x 11.0] 3.5 0.10 0.47 515D474M050JA6AE3 0.197 x 0.433 [5.0 x 11.0] 5.0 0.10 1.0 515D105M050JA6AE3 0.197 x 0.433 [5.0 x 11.0] 10.0 0.10 2.2 515D225M050JA6AE3 0.197 x 0.433 [5.0 x 11.0] 19.0 0.10 3.3 515D335M050JA6AE3 0.197 x 0.433 [5.0 x 11.0] 24.0 0.10 4.7 515D475M050JA6AE3 0.197 x 0.433 [5.0 x 11.0] 29.0 0.10 Revision: 12-Jun-13 Document Number: 42052 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 515D www.vishay.com Vishay Sprague ELECTRICAL DATA AND ORDERING INFORMATION CAPACITANCE (μF) 10.0 22.0 33.0 47.0 100.0 220.0 330.0 470.0 1000.0 2200.0 4.7 10.0 22.0 33.0 47.0 100.0 220.0 330.0 470.0 1000.0 2200.0 0.10 0.22 0.33 0.47 1.0 2.2 3.3 4.7 10.0 22.0 33.0 47.0 100.0 220.0 330.0 470.0 1000.0 0.47 1.0 2.2 3.3 4.7 10.0 22.0 33.0 47.0 100.0 220.0 Revision: 12-Jun-13 PART NUMBER NOMINAL CASE SIZE DxL 50 WVDC AT + 85 °C, SURGE = 63 V 0.197 x 0.433 [5.0 x 11.0] 0.197 x 0.433 [5.0 x 11.0] 0.248 x 0.433 [6.3 x 11.0] 0.248 x 0.433 [6.3 x 11.0] 0.315 x 0.453 [8.0 x 11.5] 0.394 x 0.630 [10.0 x 16.0] 0.394 x 0.787 [10.0 x 20.0] 0.492 x 0.787 [12.5 x 20.0] 0.630 x 0.984 [16.0 x 25.0] 0.709 x 1.398 [18.0 x 35.5] 63 WVDC AT + 85 °C, SURGE = 79 V 515D475M063JA6AE3 0.197 x 0.433 [5.0 x 11.0] 515D106M063JA6AE3 0.197 x 0.433 [5.0 x 11.0] 515D226M063AA6AE3 0.248 x 0.433 [6.3 x 11.0] 515D336M063AA6AE3 0.248 x 0.433 [6.3 x 11.0] 515D476M063BB6AE3 0.315 x 0.453 [8.0 x 11.5] 515D107M063CC6AE3 0.394 x 0.492 [10.0 x 12.5] 515D227M063CG6AE3 0.394 x 0.787 [10.0 x 20.0] 515D337M063DG6AE3 0.492 x 0.787 [12.5 x 20.0] 515D477M063DK6AE3 0.492 x 0.984 [12.5 x 25.0] 515D108M063EN6AE3 0.630 x 1.240 [16.0 x 31.5] 515D228M063FV6AE3 0.709 x 1.575 [18.0 x 40.0] 100 WVDC AT + 85 °C, SURGE = 125 V 515D104M100JA6AE3 0.197 x 0.433 [5.0 x 11.0] 515D224M100JA6AE3 0.197 x 0.433 [5.0 x 11.0] 515D334M100JA6AE3 0.197 x 0.433 [5.0 x 11.0] 515D474M100JA6AE3 0.197 x .0433 [5.0 x 11.0] 515D105M100JA6AE3 0.197 x 0.433 [5.0 x 11.0] 515D225M100JA6AE3 0.197 x 0.433 [5.0 x 11.0] 515D335M100JA6AE3 0.197 x 0.433 [5.0 x 11.0] 515D475M100JA6AE3 0.197 x 0.433 [5.0 x 11.0] 515D106M100AA6AE3 0.248 x 0.433 [6.3 x 11.0] 515D226M100BB6AE3 0.315 x 0.453 [8.0 x 11.5] 515D336M100CC6AE3 0.394 x 0.492 [10.0 x 12.5] 515D476M100CD6AE3 0.394 x 0.630 [10.0 x 16.0] 515D107M100DG6AE3 0.492 x 0.787 [12.5 x 20.0] 515D227M100EK6AE3 0.630 x 0.984 [16.0 x 25.0] 515D337M100EK6AE3 0.630 x 0.984 [16.0 x 25.0] 515D477M100EN6AE3 0.630 x 1.240 [16.0 x 31.5] 515D108M100FV6AE3 0.709 x 1.575 [18.0 x 40.0] 160 WVDC AT + 85 °C, SURGE = 200 V 515D474M160AA6AE3 0.248 x 0.433 [6.3 x 11.0] 515D105M160AA6AE3 0.248 x 0.433 [6.3 x 11.0] 515D225M160AA6AE3 0.248 x 0.433 [6.3 x 11.0] 515D335M160BB6AE3 0.315 x 0.453 [8.0 x 11.5] 515D475M160BB6AE3 0.315 x 0.453 [8.0 x 11.5] 515D106M160CC6AE3 0.394 x 0.492 [10.0 x 12.5] 515D226M160CG6AE3 0.394 x 0.787 [10.0 x 20.0] 515D336M160DG6AE3 0.492 x 0.787 [12.5 x 20.0] 515D476M160DK6AE3 0.492 x 0.984 [12.5 x 25.0] 515D107M160EK6AE3 0.630 x 0.984 [16.0 x 25.0] 515D227M160FR6AE3 0.709 x 1.398 [18.0 x 35.5] 515D106M050JA6AE3 515D226M050JA6AE3 515D336M050AA6AE3 515D476M050AA6AE3 515D107M050BB6AE3 515D227M050CD6AE3 515D337M050CG6AE3 515D477M050DG6AE3 515D108M050EK6AE3 515D228M050FR6AE3 MAX. RIPPLE AT + 85 °C 120 Hz (mA) MAX. DF AT + 20 °C 120 Hz 44.0 95.0 125.0 150.0 250.0 440.0 580.0 760.0 1350.0 2090.0 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 45.0 70.0 115.0 140.0 190.0 300.0 490.0 680.0 880.0 1550.0 2200.0 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 2.1 4.7 7.0 10.0 21.0 30.0 40.0 45.0 75.0 130.0 170.0 230.0 400.0 710.0 860.0 1100.0 1690.0 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.08 12.0 17.0 26.0 35.0 40.0 65.0 110.0 150.0 180.0 300.0 510.0 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 Document Number: 42052 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 515D www.vishay.com Vishay Sprague ELECTRICAL DATA AND ORDERING INFORMATION CAPACITANCE (μF) NOMINAL CASE SIZE DxL PART NUMBER MAX. RIPPLE AT + 85 °C 120 Hz (mA) MAX. DF AT + 20 °C 120 Hz 12.0 17.0 26.0 35.0 45.0 70.0 110.0 160.0 180.0 330.0 520.0 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 12.0 17.0 30.0 35.0 45.0 70.0 160.0 210.0 340.0 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 17.0 30.0 35.0 45.0 70.0 120.0 150.0 190.0 340.0 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 18.0 28.0 35.0 40.0 70.0 110.0 140.0 220.0 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 18.0 28.0 35.0 45.0 70.0 110.0 140.0 220.0 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 200 WVDC AT + 85 °C, SURGE = 250 V 0.47 1.0 2.2 3.3 4.7 10.0 22.0 33.0 47.0 100.0 220.0 515D474M200AA6AE3 515D105M200AA6AE3 515D225M200AA6AE3 515D335M200BB6AE3 515D475M200CC6AE3 515D106M200CD6AE3 515D226M200CG6AE3 515D336M200DK6AE3 515D476M200DK6AE3 515D107M200EN6AE3 515D227M200FV6AE3 0.47 1.0 2.2 3.3 4.7 10.0 33.0 47.0 100.0 515D474M250AA6AE3 515D105M250AA6AE3 515D225M250BB6AE3 515D335M250CC6AE3 515D475M250CC6AE3 515D106M250CG6AE3 515D336M250DK6AE3 515D476M250EK6AE3 515D107M250FR6AE3 1.0 2.2 3.3 4.7 10.0 22.0 33.0 47.0 100.0 515D105M315AA6AE3 515D225M315BB6AE3 515D335M315CC6AE3 515D475M315CD6AE3 515D106M315CG6AE3 515D226M315DK6AE3 515D336M315EK6AE3 515D476M315EN6AE3 515D107M315FV6AE3 1.0 2.2 3.3 4.7 10.0 22.0 33.0 47.0 515D105M350BB6AE3 515D225M350CC6AE3 515D335M350CD6AE3 515D475M350CD6AE3 515D106M350DG6AE3 515D226M350DK6AE3 515D336M350EN6AE3 515D476M350FR6AE3 1.0 2.2 3.3 4.7 10.0 22.0 33.0 47.0 515D105M400BB6AE3 515D225M400CC6AE3 515D335M400CD6AE3 515D475M400CD6AE3 515D106M400DG6AE3 515D226M400DK6AE3 515D336M400EN6AE3 515D476M400FR6AE3 0.248 x 0.433 [6.3 x 11.0] 0.248 x 0.433 [6.3 x 11.0] 0.248 x 0.433 [6.3 x 11.0] 0.315 x 0.453 [8.0 x 11.5] 0.394 x 0.492 [10.0 x 12.5] 0.394 x 0.630 [10.0 x 16.0] 0.394 x 0.787 [10.0 x 20.0] 0.492 x 0.984 [12.5 x 25.0] 0.492 x 0.984 [12.5 x 25.0] 0.630 x 1.240 [16.0 x 31.5] 0.709 x 1.575 [18.0 x 40.0] 250 WVDC AT + 85 °C, SURGE = 300 V 0.248 x 0.433 [6.3 x 11.0] 0.248 x 0.433 [6.3 x 11.0] 0.315 x 0.453 [8.0 x 11.5] 0.394 x 0.492 [10.0 x 12.5] 0.394 x 0.492 [10.0 x 12.5] 0.394 x 0.787 [10.0 x 20.0] 0.492 x 0.984 [12.5 x 25.0] 0.630 x 1.240 [16.0 x 31.5] 0.709 x 1.575 [18.0 x 40.0] 315 WVDC AT + 85 °C, SURGE = 365 V 0.248 x 0.433 [6.3 x 11.0] 0.315 x 0.453 [8.0 x 11.5] 0.394 x 0.492 [10.0 x 12.5] 0.394 x 0.630 [10.0 x 16.0] 0.394 x 0.787 [10.0 x 20.0] 0.492 x 0.984 [12.5 x 25.0] 0.630 x 0.984 [16.0 x 25.0] 0.630 x 1.240 [16.0 x 31.5] 0.709 x 1.575 [18.0 x 40.0] 350 WVDC AT + 85 °C, SURGE = 400 V 0.315 x .453 [8.0 x 11.5] 0.394 x 0.492 [10.0 x 12.5] 0.394 x 0.630 [10.0 x 16.0] 0.394 x 0.630 [10.0 x 16.0] 0.492 x 0.787 [12.5 x 20.0] 0.492 x 0.984 [12.5 x 25.0] 0.630 x 1.240 [16.0 x 31.5] 0.709 x 1.398 [18.0 x 35.5] 400 WVDC AT + 85 °C, SURGE = 450 V Revision: 12-Jun-13 0.315 x 0.453 [8.0 x 11.5] 0.394 x 0.492 [10.0 x 12.5] 0.394 x 0.630 [10.0 x 16.0] 0.394 x 0.787 [10.0 x 20.0] 0.492 x 0.787 [12.5 x 20.0] 0.630 x 0.984 [16.0 x 25.0] 0.630 x 1.240 [16.0 x 31.5] 0.709 x 1.398 [18.0 x 35.5] Document Number: 42052 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 515D www.vishay.com Vishay Sprague ELECTRICAL DATA AND ORDERING INFORMATION CAPACITANCE (μF) NOMINAL CASE SIZE DxL PART NUMBER MAX. RIPPLE AT + 85 °C 120 Hz (mA) MAX. DF AT + 20 °C 120 Hz 450 WVDC AT + 85 °C, SURGE = 500 V 1.0 515D105M450CC6AE3 0.394 x 0.492 [10.0 x 12.5] 19.0 0.25 2.2 515D225M450CD6AE3 0.394 x 0.630 [10.0 x 16.0] 29.0 0.25 4.7 515D475M450DG6AE3 0.492 x 0.787 [12.5 x 20.0] 50.0 0.25 10.0 515D106M450EK6AE3 0.492 x 0.984 [12.5 x 25.0] 75.0 0.25 22.0 515D226M450EN6AE3 0.630 x 1.240 [16.0 x 31.5] 110.0 0.25 33.0 515D336M450FR6AE3 0.709 x 1.398 [18.0 x 35.5] 170.0 0.25 NOMINAL CASE SIZE DxL MAX. RIPPLE AT + 85 °C 120 Hz (mA) MAX. DF AT + 20 °C 120 Hz LOW PROFILE RATINGS in inches [millimeters] CAPACITANCE (μF) PART NUMBER 6.3 WVDC AT + 85 °C, SURGE = 8 V 22.0 515D226M6R3HW6AE3 0.157 x 0.276 [4.0 x 7.0] 34.0 0.24 33.0 515D336M6R3JW6AE3 0.197 x 0.276 [5.0 x 7.0] 42.0 0.24 47.0 515D476M6R3JW6AE3 0.197 x 0.276 [5.0 x 7.0] 50.0 0.24 100.0 515D107M6R3AW6AE3 0.248 x 0.276 [6.3 x 7.0] 77.0 0.24 22.0 515D226M010JW6AE3 0.197 x 0.276 [5.0 x 7.0] 38.0 0.20 33.0 515D336M010JW6AE3 0.197 x 0.276 [5.0 x 7.0] 47.0 0.20 47.0 515D476M010AW6AE3 0.248 x 0.276 [6.3 x 7.0] 59.0 0.20 10.0 515D106M016HW6AE3 0.157 x 0.276 [4.0 x 7.0] 28.0 0.16 22.0 515D226M016JW6AE3 0.197 x 0.276 [5.0 x 7.0] 44.0 0.16 33.0 515D336M016AW6AE3 0.248 x 0.276 [6.3 x 7.0] 57.0 0.16 47.0 515D476M016AW6AE3 0.248 x 0.276 [6.3 x 7.0] 68.0 0.16 10 WVDC AT + 85 °C, SURGE = 13 V 16 WVDC AT + 85 °C, SURGE = 20 V 25 WVDC AT + 85 °C, SURGE = 32 V 10.0 515D106M025JW6AE3 0.197 x 0.276 [5.0 x 7.0] 33.0 0.14 22.0 515D226M025AW6AE3 0.248 x 0.276 [6.3 x 7.0] 51.0 0.14 33.0 515D336M025AW6AE3 0.248 x 0.276 [6.3 x 7.0] 63.0 0.14 35 WVDC AT + 85 °C, SURGE = 44 V 4.7 515D475M035HW6AE3 0.157 x 0.276 [4.0 x 7.0] 24.0 0.12 10.0 515D106M035JW6AE3 0.197 x 0.276 [5.0 x 7.0] 36.0 0.12 22.0 515D226M035AW6AE3 0.248 x 0.276 [6.3 x 7.0] 57.0 0.12 50 WVDC AT + 85 °C, SURGE = 63 V 0.10 515D104M050JW6AE3 0.157 x 0.276 [4.0 x 7.0] 1.0 0.10 0.22 515D224M050HW6AE3 0.157 x 0.276 [4.0 x 7.0] 2.3 0.10 0.33 515D334M050HW6AE3 0.157 x 0.276 [4.0 x 7.0] 3.5 0.10 0.47 515D474M050HW6AE3 0.157 x 0.276 [4.0 x 7.0] 5.0 0.10 1.0 515D105M050HW6AE3 0.157 x 0.276 [4.0 x 7.0] 10.0 0.10 2.2 515D225M050HW6AE3 0.157 x 0.276 [4.0 x 7.0] 19.0 0.10 3.3 515D335M050HW6AE3 0.157 x 0.276 [4.0 x 7.0] 24.0 0.10 4.7 515D475M050JW6AE3 0.197 x 0.276 [5.0 x 7.0] 29.0 0.10 10.0 515D106M050AW6AE3 0.248 x 0.276 [6.3 x 7.0] 44.0 0.10 Revision: 12-Jun-13 Document Number: 42052 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000