VISHAY 790D476X

790D
www.vishay.com
Vishay Sprague
Resin-Molded, Radial-Lead
Solid Tantalum Capacitors
FEATURES
• Terminations: Tin/lead (SnPb), 100 % tin (Sn)
• Four case sizes precisely molded with a flame
retardant epoxy resin
• Stand off on all case sizes
• Available on tape for automatic insertion
equipment (only A- and B-case, C- and D-case
on request)
• Low leakage current
• Low impedance
• Extended value ranges available
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 125 °C
(above 85 °C, voltage derating is required)
Capacitance Range: 0.1 μF to 330 μF
Capacitance Tolerance: ± 10 %, ± 20 %
Voltage Rating: 6.3 VDC to 50 VDC
ORDERING INFORMATION
790D
157
X0
006
R
2
P
E3
MODEL
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE
RATING
CASE
CODE
STYLE
NUMBER
PACKAGING
RoHS
COMPLIANT
790D =
Standard
and
extended
range
Expressed in
picofarads.
The first two
digits are the
significant
figures. The
third is the
number of
zeros following.
X0 = ± 20 %
X9 = ± 10 %
Expressed in
volts. To
complete the
three-digit
block, zeros
precede the
voltage rating.
A decimal
point is indicated
by an “R”
(6R3 = 6.3 V)
See
Ratings
and Case
Codes
table
Insulated
case
(standard)
See packing information
B: Bulk
G: Ammopack
(H = 16.5 mm)
H: Ammopack
(H = 18.5 mm)
I: Ammopack shouldered
leads (A case)
X: Reel pack
(H = 16.5 mm)
Y: Reel pack
(H = 18.5 mm)
Z: Reel pack shouldered
leads (A case)
E3 = 100 %
tin termination
(RoHS
compliant)
Blank = SnPb
termination
DIMENSIONS in inches [millimeters]
H 0.3 mm
MIN.
T
+
Ø
12 mm
min.
D
e
CASE CODE
A
B
C
D
Revision: 18-Jun-12
H MAX.
0.287 [7.3]
0.413 [10.5]
0.413 [10.5]
0.413 [10.5]
D MAX.
0.185 [4.7]
0.287 [7.3]
0.484 [12.3]
0.484 [12.3]
T MAX.
0.165 [4.2]
0.189 [4.8]
0.287 [7.3]
0.484 [12.3]
E ± 0.15 [0.006]
0.100 [2.54]
0.200 [5.08]
0.400 [10.16]
0.400 [10.16]
Ø 0.05 [0.002] (+ 10 %)
0.020 [0.5]
0.020 [0.5]
0.024 [0.6]
0.024 [0.6]
Document Number: 42072
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
790D
www.vishay.com
Vishay Sprague
RATINGS AND CASE CODES
RATED VOLTAGE UR AT + 85 °C
6.3 V
10 V
16 V
4.0 V
6.3 V
10 V
CR
(μF)
20 V
25 V
35 V
40 V
50 V
23 V
25 V
32 V
CATEGORY VOLTAGE UC AT + 125 °C
STD.
EXT.
STD.
EXT.
STD.
13 V
EXT.
STD.
16 V
EXT.
STD.
EXT.
STD.
EXT.
STD.
0.10
EXT.
A
STD.
A
0.15
A
A
0.22
A
A
0.33
A
0.47
A
0.68
A
1.0
1.5
A
2.2
A
3.3
A
4.7
6.8
A
A
A
22
A
33
B
B
100
B
C
B
C
C
C
C
C
B
C
B
C
C
B
C
C
D
D
D
C
D
C
220
B
C
C
C
B
A
B
B
B
B
68
B
C
B
B
B
47
330
B
B
B
A
A
15
A
B
A
A
A
B
A
10
150
EXT.
D
D
D
D
STANDARD RATINGS/EXTENDED RATINGS
CAPACITANCE
CR (μF)
CASE CODE
PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
120 Hz, AT + 25 °C
(%)
MAX. IMPEDANCE
100 kHz, AT + 25 °C
()
UR = 6.3 VDC AT + 85 °C, SURGE = 8 V; UC = 4 VDC AT + 125 °C, SURGE = 5 V
6.8
A
790D685X(1)6R3A2(2)
1.0
6
4.0
22
A
790D226X(1)6R3A2(2)
1.3
6
2.1
47
B
790D476X(1)6R3B2(2)
2.9
6
1.3
68
B
790D686X(1)6R3B2(2)
4.2
6
1.3
150
C
790D157X(1)6R3C2(2)
9.4
6
0.6
220
C
790D227X(1)6R3C2(2)
13.8
6
0.6
330
D
790D337X(1)6R3D2(2)
20.7
8
0.4
Notes
• Part number definitions:
(1) Insert 0 for ± 20 % tolerance or 9 for ± 10 %
(2) See Ordering Information, packaging code
• Extended ratings in bold print
Revision: 18-Jun-12
Document Number: 42072
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
790D
www.vishay.com
Vishay Sprague
STANDARD RATINGS/EXTENDED RATINGS
CAPACITANCE
CR (μF)
CASE CODE
PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
120 Hz, AT + 25 °C
(%)
MAX. IMPEDANCE
100 kHz, AT + 25 °C
()
UR = 10 VDC AT + 85 °C, SURGE = 13 V; UC = 6.3 VDC AT + 125 °C, SURGE = 8 V
4.7
A
790D475X(1)010A2(2)
1.0
6
4.0
15
A
790D156X(1)010A2(2)
1.5
6
2.5
33
B
790D336X(1)010B2(2)
3.3
6
1.3
47
B
790D476X(1)010B2(2)
4.7
6
1.4
68
B
790D686X(1)010B2(2)
6.8
6
1.3
0.6
100
C
790D107X(1)010C2(2)
10.0
6
150
C
790D157X(1)010C2(2)
15.0
6
0.6
220
D
790D227X(1)010D2(2)
22.0
8
0.4
UR = 16 VDC AT + 85 °C, SURGE = 20 V; UC = 10 VDC AT + 125 °C, SURGE = 13 V
2.2
A
790D225X(1)016A2(2)
1.0
6
5.5
3.3
A
790D335X(1)016A2(2)
1.0
6
4.4
10
A
790D106X(1)016A2(2)
1.6
6
2.7
15
B
790D156X(1)016B2(2)
2.4
6
1.6
22
B
790D226X(1)016B2(2)
3.5
6
1.3
33
B
790D336X(1)016B2(2)
5.2
6
1.6
47
C
790D476X(1)016C2(2)
7.5
6
0.8
68
C
790D686X(1)016C2(2)
10.8
6
0.6
100
C
790D107X(1)016C2(2)
16.0
6
0.7
100
D
790D107X(1)016D2(2)
16.0
6
0.5
D
790D157X(1)016D2(2)
24.0
8
0.4
150
UR = 20 VDC AT + 85 °C, SURGE = 26 V; UC = 13 VDC AT + 125 °C, SURGE = 16 V
2.2
A
790D225X(1)020A2(2)
1.0
6
5.5
6.8
A
790D685X(1)020A2(2)
1.3
6
3.5
15
B
790D156X(1)020B2(2)
3.0
6
1.5
22
B
790D226X(1)020B2(2)
4.4
6
2.1
0.7
47
C
790D476X(1)020C2(2)
9.4
6
68
C
790D686X(1)020C2(2)
13.6
6
0.8
100
D
790D107X(1)020D2(2)
20.0
6
0.7
UR = 25 VDC AT + 85 °C, SURGE = 32 V; UC = 16 VDC AT + 125 °C, SURGE = 20 V
1.5
A
790D155X(1)025A2(2)
1.0
6
6.0
4.7
A
790D475X(1)025A2(2)
1.1
6
4.5
10
B
790D106X(1)025B2(2)
2.5
6
1.6
15
B
790D156X(1)025B2(2)
3.7
6
2.4
22
B
790D226X(1)025B2(2)
5.5
6
2.1
33
C
790D336X(1)025C2(2)
8.2
6
0.8
47
D
790D476X(1)025D2(2)
11.8
6
1.0
UR = 35 VDC AT + 85 °C, SURGE = 45 V; UC= 23 VDC AT + 125 °C, SURGE = 29 V
3.3
A
790D335X(1)035A2(2)
1.2
6
6.0
10
B
790D106X(1)035B2(2)
3.5
6
2.6
33
C
790D336X(1)035C2(2)
11.6
6
1.3
Notes
• Part number definitions:
(1) Insert 0 for ± 20 % tolerance or 9 for ± 10 %
(2) See Ordering Information, packaging code
• Extended ratings in bold print
Revision: 18-Jun-12
Document Number: 42072
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
790D
www.vishay.com
Vishay Sprague
STANDARD RATINGS/EXTENDED RATINGS
CAPACITANCE
CR (μF)
CASE CODE
PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
120 Hz, AT + 25 °C
(%)
MAX. IMPEDANCE
100 kHz, AT + 25 °C
()
UR = 40 VDC AT + 85 °C, SURGE = 52 V; UC = 25 VDC AT + 125 °C, SURGE = 32 V
0.10
A
790D104X(1)040A2(2)
1.0
6
30.0
0.15
A
790D154X(1)040A2(2)
1.0
6
24.0
0.22
A
790D224X(1)040A2(2)
1.0
6
18.0
0.33
A
790D334X(1)040A2(2)
1.0
6
14.0
0.47
A
790D474X(1)040A2(2)
1.0
6
11.0
1.0
A
790D105X(1)040A2(2)
1.0
6
6.5
1.5
B
790D155X(1)040B2(2)
1.0
6
5.2
2.2
B
790D225X(1)040B2(2)
1.0
6
4.0
3.3
A
790D335X(1)040A2(2)
1.3
6
2.8
3.3
B
790D335X(1)040B2(2)
1.3
6
2.8
4.7
B
790D475X(1)040B2(2)
1.8
6
2.0
6.8
B
790D685X(1)040B2(2)
2.7
6
1.6
10
C
790D106X(1)040C2(2)
4.0
6
1.3
15
C
790D156X(1)040C2(2)
6.0
6
1.0
22
C
790D226X(1)040C2(2)
8.8
6
0.8
33
D
790D336X(1)040D2(2)
13.2
6
0.6
D
790D476X(1)040D2(2)
18.8
6
0.5
47
UR = 50 VDC AT + 85 °C, SURGE = 65 V; UC = 32 VDC AT + 125 °C, SURGE = 41 V
0.10
A
790D104X(1)050A2(2)
1.0
6
30
0.15
A
790D154X(1)050A2(2)
1.0
6
24
0.22
A
790D224X(1)050A2(2)
1.0
6
18
0.68
A
790D684X(1)050A2(2)
1.0
6
8.0
1.0
A
790D105X(1)050A2(2)
1.0
6
6.5
1.5
B
790D155X(1)050B2(2)
1.0
6
5.2
2.2
B
790D225X(1)050B2(2)
1.1
6
4.0
3.3
B
790D335X(1)050B2(2)
1.6
6
2.8
4.7
B
790D475X(1)050B2(2)
2.3
6
2.0
6.8
C
790D685X(1)050C2(2)
3.4
6
1.6
10
C
790D106X(1)050C2(2)
5.0
6
1.3
15
C
790D156X(1)050C2(2)
7.5
6
1.0
Notes
• Part number definitions:
(1) Insert 0 for ± 20 % tolerance or 9 for ± 10 %
(2) See Ordering Information, packaging code
• Extended ratings in bold print
Revision: 18-Jun-12
Document Number: 42072
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
790D
www.vishay.com
Vishay Sprague
MAXIMUM PERMISSIBLE RIPPLE VOLTAGE AT + 25 °C
CASE SIZE “B”
30
20
10
10
7
7
5
3
2
35 50
/ V
25 40 V
16 V
10 V
6. V
3V
1
0.7
0.5
0.3
0.2
5
3
2
Urms
Urms
CASE SIZE “A”
30
20
5
35 0 V
/
25 40 V
16 V
1 V
6. 0 V
3V
1
0.7
0.5
0.3
0.2
0.1
0.1
0.1K
0.5
1K
5
10K
50
100K
500
0.1K
0.5
1K
5
FREQUENCY IN Hz
10
10
7
7
5
3
2
5
3
2
5
35 0 V
/
25 40
16 V V
10 V
6. V
3V
0.5
0.3
0.2
100K
500
50
100K
500
CASE SIZE “D”
30
20
Urms
Urms
CASE SIZE “C”
0.7
50
FREQUENCY IN Hz
30
20
1
10K
35 50
/ V
25 40
V V
1
16
10 V
6. V
3V
0.7
0.5
0.3
0.2
0.1
0.1
0.1K
0.5
1K
5
10K
50
100K
500
0.1K
0.5
FREQUENCY IN Hz
1K
5
10K
FREQUENCY IN Hz
TYPICAL CURVES OF IMPEDANCE VS FREQUENCY
100
30
6.3 V
35 V
10
10
Ω
Ω
6.8 µF
1
1 µF
47 µF
1
150 µF
6.8 µF
0.1
330 µF
47 µF
22 µF
0.1
1K
10K
100K
1M
FREQUENCY IN Hz
Revision: 18-Jun-12
10M
100M
1K
10K
100K
1M
10M
100M
FREQUENCY IN Hz
Document Number: 42072
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
790D
www.vishay.com
Vishay Sprague
PACKAGING QUANTITIES
CASE CODE
REEL
X/Y
AMMO
G/H
BULK
B
500
A
1000
1000
B
1000
1000
250
C
300 (1)
300 (1)
100
D
200 (1)
200 (1)
50
Note
(1) Non preferred configuration on request only
PERFORMANCE CHARACTERISTICS
1. Operating Temperature: - 55 °C to + 85 °C with rated
voltage UR applied. + 85 °C to 125 °C with linear
voltage derating to category voltage UC (see general
information) applied.
2. Capacitance and Tolerance: Capacitance measured at
100 Hz and + 25 °C shall be within the specified tolerance
limits of the nominal rating.
7.
Life Test: 2000 h at + 85 °C with rated voltage applied
2000 h at + 125 °C with category voltage applied
C/C  10 % of initial value
IL  1.25 initial limit
DF  initial limit
8.
Humidity Test: 56 days at + 40 °C, 90 % relative
humidity
C/C  8 % of initial value
IL  initial limit
DF  initial limit
9.
Charge and Discharge Test:
1 million cycles at + 85 °C,
0.5 s charge at UR
0.5 s discharge
Series resistance < 0.5 
C/C  5 % of initial value
IL  initial limit
DF  initial limit
3. Reverse Voltage: 15 % of rated voltage at + 25 °C
5 % of rated voltage at + 85 °C
4. Surge Voltage: 130 % of UR at + 85 °C
130 % of UC at + 125 °C
5. Impedance at 100 kHz: Measured at + 20 °C ± 5 °C,
impedance shall not exceed the values listed in
datasheet.
6. Stability at low and high temperatures: Capacitance
change with temperature, dissipation factor and DC
leakage current shall not exceed the limits of the
following table.
TEMP.
CAPACITANCE
DISSIPATION
CHANGE
FACTOR
CRUR  1900
IL
CRUR > 1900
- 55 °C
- 10 %
+ 25 °C
-
+ 85 °C
+ 12 %
+ 125 °C
+ 15 %
9%
11 %
6%
8%
9%
11 %
12 %
Revision: 18-Jun-12
14 %
LEAKAGE
CURRENT
10. Marking:
Top: Rating and polarity
Front: Type, date code, Sprague trademark
0.01 CR x UR or
1 μA whichever
is greater
0.1 CR x UR or
10 μA whichever
is greater
0.125 CR x UR or
12.5 μA
whichever
is greater
Document Number: 42072
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
790D
www.vishay.com
Vishay Sprague
TAPE AND REEL PACKING
Reel packing
“A” and “B” cases only (meets IEC 286-2)
h
Ø 20
p
SPRAGUE
30 MAX.
W2
329 - 331
H0
H
W0
W1
Ammopacking
W
t
P0
P2
P1
F
ØD
191
201
Direction of unreel
41 to 45
320 to 330
DESIGNATIONS
SYMBOL
DIMENSIONS (mm)
Pitch of component
P
12.7 ± 1.0
Feed hole pitch
P0
12.7 ± 0.3
Tape width
W
18 (+ 1/- 0.5)
Hold down tape width
W0
5.0
Hole position
W1
9 (+ 0.75/-0.5)
Hold down tape position
W2
0 (+ 3/-0)
Feed hole diameter
D0
4.0 ± 0.3
T
0.5 ± 0.2
Tape thickness
Component alignment
h
0±2
Lead clinch height
H0
16.0 ± 0.5
Hole center to component center
P2
6.35 ± 1.3
F
P1
CASE A
2.5 + 0.6/- 0.1
5.1 ± 0.7
CASE B
5 + 0.6/- 0.1
3.85 ± 0.7
CASE B
5 + 0.6/- 0.1
3.85 ± 0.7
Reel pack options
H = 16.5
H = 18.5
X
Y
Z
X
Y
Ammopack options
H = 16.5
H = 18.5
G
H
I
G
H
1000
1000
1000
Lead wire spacing
Feed hole center to wire center
Quantity per reel/box
PRODUCT INFORMATION
Quick Reference Guide
www.vishay.com/doc?40037
Selector Guide
www.vishay.com/doc?49054
Parameter Comparison Guide
www.vishay.com/doc?40033
Mounting of Through-Hole Components
www.vishay.com/doc?40108
Frequently Asked Questions
www.vishay.com/doc?40110
Revision: 18-Jun-12
Document Number: 42072
7
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
790D106X0025B2BE3 790D156X9025B2B 790D225X0050B2BE3