601D www.vishay.com Vishay Sprague Aluminum Capacitors + 105 °C, Tubular, Axial Lead FEATURES • Temperature range - 55 °C to + 105 °C • Long life • Low ESR • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA DESCRIPTION RIPPLE CURRENT MULTIPLIERS VALUE Nominal case size Ø D x L in mm TEMPERATURE 0.625" x 1.125" [15.875 x 28.575] to 1.0" x 3.625" [25.4 x 92.075] AMBIENT TEMPERATURE + 105 °C 0.4 Operating temperature - 55 °C to + 105 °C + 65 °C 1.7 Rated capacitance range, CR 12 μF to 33 000 μF + 45 °C 2.0 6.3 WVDC to 300 WVDC Rated voltage range, UR Termination Axial leads Life validation test 2000 h at 105 °C Shelf life 500 h at 105 °C + 25 °C - 10 %, + 50 % Tolerance on CR CAP 15 % from initial measurement. ESR 1.25 x initial specified limit. DCL initial specified limit. CAP 10 % from initial measurement. ESR 1.15 x initial specified limit. DCL 2.0 x initial specified limit. 2.6 FREQUENCY (Hz) WVDC 50 TO 60 300 TO 400 0 to 60 0.85 1.10 1.15 61 to 250 0.83 1.15 1.20 1000 AND UP LOW TEMPERATURE PERFORMANCE CAPACITANCE RATIO C- 55 °C/C+ 25 °C MINIMUM AT 120 Hz RATED VOLTAGE WVDC CAPACITANCE REMAINING 0 to 25 75 % 26 to 100 80 % 101 to 250 85 % ESR RATIO ESR - 55 °C/ESR + 25 °C MAXIMUM AT 120 Hz RATED VOLTAGE WVDC I = K CV K = 0.5 at + 25 °C K = 3.0 at + 105 °C I in μA, C in μF, V in Volts DC leakage current MULTIPLIERS MULTIPLIER 0 to 9 10 10 to 40 12 41 to 250 18 DIMENSIONS in inches [millimeters] CASE CODE FE FJ FL FP FS FT GE GJ Revision: 26-Apr-13 STYLE 1 AND 2 INSULATING SLEEVE D 0.635 ± 0.020 [16.1 ± 0.51] 0.635 ± 0.020 [16.1 ± 0.51] 0.635 ± 0.020 [16.1 ± 0.51] 0.635 ± 0.020 [16.1 ± 0.51] 0.635 ± 0.020 [16.1 ± 0.51] 0.635 ± 0.020 [16.1 ± 0.51] 0.760 ± 0.020 [19.3 ± 0.51] 0.760 ± 0.020 [19.3 ± 0.51] L 1.141 ± 0.062 [29.0 ± 1.57] 1.641 ± 0.062 [41.7 ± 1.57] 2.141 ± 0.062 [54.4 ± 1.57] 2.641 ± 0.062 [67.1 ± 1.57] 3.141 ± 0.062 [79.8 ± 1.57] 3.641 ± 0.062 [92.5 ± 1.57] 1.141 ± 0.062 [29.0 ± 1.57] 1.641 ± 0.062 [41.7 ± 1.57] STYLE 3 AND 7 INSULATING SLEEVE, COATED END SEAL D 0.635 ± 0.020 [16.1 ± 0.51] 0.635 ± 0.020 [16.1 ± 0.51] 0.635 ± 0.020 [16.1 ± 0.51] 0.635 ± 0.020 [16.1 ± 0.51] 0.635 ± 0.020 [16.1 ± 0.51] 0.635 ± 0.020 [16.1 ± 0.51] 0.760 ± 0.020 [19.3 ± 0.51] 0.760 ± 0.020 [19.3 ± 0.51] L 1.187 ± 0.062 [30.2 ± 1.57] 1.687 ± 0.062 [42.9 ± 1.57] 2.187 ± 0.062 [55.6 ± 1.57] 2.687 ± 0.062 [68.3 ± 1.57] 3.187 ± 0.062 [81.0 ± 1.57] 3.687 ± 0.062 [93.7 ± 1.57] 1.187 ± 0.062 [30.2 ± 1.57] 1.687 ± 0.062 [42.9 ± 1.57] TYPICAL WEIGHT 0.32 oz. (9.0 g) 0.39 oz. (11.0 g) 0.53 oz. (15.0 g) 0.63 oz. (18.0 g) 0.88 oz. (25.0 g) 0.98 oz. (28.0 g) 0.46 oz. (13.0 g) 0.67 oz. (19.0 g) Document Number: 42039 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 601D www.vishay.com Vishay Sprague DIMENSIONS in inches [millimeters] STYLE 1 AND 2 INSULATING SLEEVE CASE CODE D 0.760 ± 0.020 [19.3 ± 0.51] 0.760 ± 0.020 [19.3 ± 0.51] 0.760 ± 0.020 [19.3 ± 0.51] 0.760 ± 0.020 [19.3 ± 0.51] 0.885 ± 0.020 [22.5 ± 0.51] 0.885 ± 0.020 [22.5 ± 0.51] 0.885 ± 0.020 [22.5 ± 0.51] 0.885 ± 0.020 [22.5 ± 0.51] 0.885 ± 0.020 [22.5 ± 0.51] 0.885 ± 0.020 [22.5 ± 0.51] 1.010 ± 0.020 [25.7 ± 0.51] 1.010 ± 0.020 [25.7 ± 0.51] 1.010 ± 0.020 [25.7 ± 0.51] 1.010 ± 0.020 [25.7 ± 0.51] 1.010 ± 0.020 [25.7 ± 0.51] 1.010 ± 0.020 [25.7 ± 0.51] GL GP GS GT HE HJ HL HP HS HT JE JJ JL JP JS JT STYLE 3 AND 7 INSULATING SLEEVE, COATED END SEAL L 2.141 ± 0.062 [54.4 ± 1.57] 2.641 ± 0.062 [67.1 ± 1.57] 3.141 ± 0.062 [79.8 ± 1.57] 3.641 ± 0.062 [92.5 ± 1.57] 1.141 ± 0.062 [29.0 ± 1.57] 1.641 ± 0.062 [41.7 ± 1.57] 2.141 ± 0.062 [54.4 ± 1.57] 2.641 ± 0.062 [67.1 ± 1.57] 3.141 ± 0.062 [79.8 ± 1.57] 3.641 ± 0.062 [92.5 ± 1.57] 1.141 ± 0.062 [29.0 ± 1.57] 1.641 ± 0.062 [41.7 ± 1.57] 2.141 ± 0.062 [54.4 ± 1.57] 2.641 ± 0.062 [67.1 ± 1.57] 3.141 ± 0.062 [79.8 ± 1.57] 3.641 ± 0.062 [92.5 ± 1.57] D 0.760 ± 0.020 [19.3 ± 0.51] 0.760 ± 0.020 [19.3 ± 0.51] 0.760 ± 0.020 [19.3 ± 0.51] 0.760 ± 0.020 [19.3 ± 0.51] 0.885 ± 0.020 [22.5 ± 0.51] 0.885 ± 0.020 [22.5 ± 0.51] 0.885 ± 0.020 [22.5 ± 0.51] 0.885 ± 0.020 [22.5 ± 0.51] 0.885 ± 0.020 [22.5 ± 0.51] 0.885 ± 0.020 [22.5 ± 0.51] 1.010 ± 0.020 [25.7 ± 0.51] 1.010 ± 0.020 [25.7 ± 0.51] 1.010 ± 0.020 [25.7 ± 0.51] 1.010 ± 0.020 [25.7 ± 0.51] 1.010 ± 0.020 [25.7 ± 0.51] 1.010 ± 0.020 [25.7 ± 0.51] TYPICAL WEIGHT L 2.187 ± 0.062 [55.6 ± 1.57] 2.687 ± 0.062 [68.3 ± 1.57] 3.187 ± 0.062 [81.0 ± 1.57] 3.687 ± 0.062 [93.7 ± 1.57] 1.187 ± 0.062 [30.2 ± 1.57] 1.687 ± 0.062 [42.9 ± 1.57] 2.187 ± 0.062 [55.6 ± 1.57] 2.687 ± 0.062 [68.3 ± 1.57] 3.187 ± 0.062 [81.0 ± 1.57] 3.687 ± 0.062 [93.7 ± 1.57] 1.187 ± 0.062 [30.2 ± 1.57] 1.687 ± 0.062 [42.9 ± 1.57] 2.187 ± 0.062 [55.5 ± 1.57] 2.687 ± 0.062 [68.3 ± 1.57] 3.187 ± 0.062 [81.0 ± 1.57] 3.687 ± 0.062 [93.7 ± 1.57] 0.74 oz. (21.0 g) 0.88 oz. (25.0 g) 1.16 oz. (33.0 g) 1.33 oz. (38.0 g) 0.63 oz. (18.0 g) 0.95 oz. (27.0 g) 1.02 oz. (29.0 g) 1.37 oz. (39.0 g) 1.72 oz. (49.0 g) 2.07 oz. (59.0 g) 0.81 oz. (23.0 g) 1.02 oz. (29.0 g) 1.54 oz. (44.0 g) 1.86 oz. (53.0 g) 2.21 oz. (63.0 g) 2.52 oz. (72.0 g) DIMENSIONS AND AVAILABLE FORMS Styles 1 and 2 Styles 3 and 7 PVC sleeve PVC sleeve 1.25 min. (31.8) 1.25 min. (31.8) - 1.25 min. (31.8) 1.25 min. (31.8) D - + D + W W L L Epoxy end seal PART NUMBER INFORMATION 601D 158 F 6R3 FE 1 TYPE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING CASE CODE CASE STYLE Identifies the series name. Expressed in pF. The first two digits are significant figures. The third is the number of zeros. F = - 10 %/+ 50 % (std.) Expressed in volts. The letter “R” signifies a decimal point (i.e. 6R3 = 6.3 V). See table Dimensions 1 = PVC sleeve (std.) 2 = Polyester sleeve 3 = Polyester sleeve with epoxy end seal (required for exposure to halogenated cleaning solvents) 7 = PVC sleeve with epoxy end seal (required for exposure to halogenated cleaning solvents) Revision: 26-Apr-13 Document Number: 42039 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 601D www.vishay.com ORDERING EXAMPLE Vishay Sprague (1) Electrolytic capacitor 601D series: 601D158F050GL1 Note (1) For lead (Pb)-free/RoHS compliant products add suffix “E3” to part number. Example: 601D158F050GL1E3 ELECTRICAL DATA AND ORDERING INFORMATION CAPACITANCE (μF) PART NUMBER 1500 2700 3900 5600 6800 8200 2700 5600 8200 10 000 12 000 15 000 3900 8200 12 000 15 000 18 000 22 000 5600 10 000 18 000 22 000 27 000 33 000 601D158F6R3FE1 601D278F6R3FJ1 601D398F6R3FL1 601D568F6R3FP1 601D688F6R3FS1 601D828F6R3FT1 601D278F6R3GE1 601D568F6R3GJ1 601D828F6R3GL1 601D109F6R3GP1 601D129F6R3GS1 601D159F6R3GT1 601D398F6R3HE1 601D828F6R3HJ1 601D129F6R3HL1 601D159F6R3HP1 601D189F6R3HS1 601D229F6R3HT1 601D568F6R3JE1 601D109F6R3JJ1 601D189F6R3JL1 601D229F6R3JP1 601D279F6R3JS1 601D339F6R3JT1 1000 2200 3300 4700 5600 6800 2200 3900 6800 8200 10 000 12 000 3300 5600 8200 12 000 15 000 18 000 3900 8200 13 000 18 000 22 000 27 000 601D108F010FE1 601D228F010FJ1 601D338F010FL1 601D478F010FP1 601D568F010FS1 601D686F010FT1 601D228F010GE1 601D398F010GJ1 601D688F010GL1 601D828F010GP1 601D109F010GS1 601D129F010GT1 601D338F010HE1 601D568F010HJ1 601D828F010HL1 601D129F010HP1 601D159F010HS1 601D189F010HT1 601D398F010JE1 601D828F010JJ1 601D139F010JL1 601D189F010JP1 601D229F010JS1 601D279F010JT1 Revision: 26-Apr-13 NOMINAL CASE SIZE LEAD DIAMETER DxL W (in) (in) 6.3 WVDC AT + 85 °C, SURGE = 8 V 0.625 x 1.125 0.625 x 1.625 0.625 x 2.125 No. 20 AWG (0.032) 0.625 x 2.625 0.625 x 3.125 0.625 x 3.625 0.750 x 1.125 0.750 x 1.625 0.750 x 2.125 0.750 x 2.625 0.750 x 3.125 0.750 x 3.625 0.875 x 1.125 0.875 x 1.625 0.875 x 2.125 No. 18 AWG (0.040) 0.875 x 2.625 0.875 x 3.125 0.875 x 3.625 1.000 x 1.125 1.000 x 1.625 1.000 x 2.125 1.000 x 2.625 1.000 x 3.125 1.000 x 3.625 10 WVDC AT + 85 °C, SURGE = 15 V 0.625 x 1.125 0.625 x 1.625 0.625 x 2.125 No. 20 AWG (0.032) 0.625 x 2.625 0.625 x 3.125 0.625 x 3.625 0.750 x 1.125 0.750 x 1.625 0.750 x 2.125 0.750 x 2.625 0.750 x 3.125 0.750 x 3.625 0.875 x 1.125 0.875 x 1.625 0.875 x 2.125 No. 18 AWG (0.040) 0.875 x 2.625 0.875 x 3.125 0.875 x 3.625 1.000 x 1.125 1.000 x 1.625 1.000 x 2.125 1.000 x 2.625 1.000 x 3.125 1.000 x 3.625 MAX. ESR AT 120 Hz/25 °C () MAX. RIPPLE CURRENT AT 120 Hz/85 °C (A) 0.311 0.148 0.098 0.074 0.060 0.051 0.169 0.083 0.057 0.043 0.037 0.031 0.118 0.059 0.042 0.033 0.027 0.023 0.093 0.049 0.033 0.026 0.022 0.019 1.04 1.76 2.41 3.05 3.66 4.26 1.58 2.60 3.52 4.40 5.13 5.98 2.09 3.38 4.47 5.54 6.56 7.52 2.57 4.05 5.44 6.72 7.86 8.98 0.332 0.157 0.106 0.080 0.065 0.055 0.182 0.091 0.061 0.047 0.041 0.035 0.127 0.064 0.044 0.036 0.029 0.025 0.099 0.050 0.036 0.028 0.023 0.020 1.00 1.70 2.31 2.94 3.52 4.11 1.53 2.50 3.40 4.25 5.00 5.72 2.02 3.26 4.38 5.30 6.43 7.37 2.49 4.00 5.27 6.45 7.68 8.75 Document Number: 42039 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 601D www.vishay.com Vishay Sprague ELECTRICAL DATA AND ORDERING INFORMATION CAPACITANCE (μF) PART NUMBER NOMINAL CASE SIZE DxL (in) LEAD DIAMETER W (in) MAX. ESR AT 120 Hz/25 °C () MAX. RIPPLE CURRENT AT 120 Hz/85 °C (A) 820 601D827F016FE1 0.625 x 1.125 0.349 0.99 1800 601D188F016FJ1 0.625 x 1.625 0.175 1.62 16 WVDC AT + 85 °C, SURGE = 20 V 2700 601D278F016FL1 0.625 x 2.125 3300 601D338F016FP1 0.625 x 2.625 0.115 2.23 0.087 2.83 3900 601D398F016FS1 0.625 x 3.125 0.071 3.37 4700 1500 601D478F016FT1 0.625 x 3.625 0.060 3.94 601D158F016GE1 0.750 x 1.125 0.198 3300 1.47 601D338F016GJ1 0.750 x 1.625 0.098 2.40 4700 601D478F016GL1 0.750 x 2.125 0.067 3.26 5600 601D568F016GP1 0.750 x 2.625 0.051 4.07 8200 601D828F016GS1 0.750 x 3.125 0.042 4.87 10 000 601D109F016GT1 0.750 x 3.625 0.036 5.64 2200 601D228F016HE1 0.875 x 1.125 0.139 1.93 4700 601D478F016HJ1 0.875 x 1.625 0.070 3.12 No. 20 AWG (0.032) No. 18 AWG (0.040) 6800 601D688F016HL1 0.875 x 2.125 0.048 4.20 10 000 601D109F016HP1 0.875 x 2.625 0.037 5.23 12 000 601D129F016HS1 0.875 x 3.125 0.031 6.19 15 000 601D159F016HT1 0.875 x 3.625 0.027 7.06 3300 601D338F016JE1 1.000 x 1.125 0.108 2.38 6800 601D688F016JJ1 1.000 x 1.625 0.055 3.83 10 000 601D109F016JL1 1.000 x 2.125 0.038 5.10 25 WVDC AT + 85 °C, SURGE = 40 V 560 601D567F025FE1 0.625 x 1.125 0.383 0.94 1000 601D108F025FJ1 0.625 x 1.625 0.198 1.52 1500 601D158F025FL1 0.625 x 2.125 2200 601D228F025FP1 0.625 x 2.625 2700 601D278F025FS1 0.625 x 3.125 0.078 3.22 3300 601D338F025FT1 0.625 x 3.625 0.065 3.79 1000 601D108F025GE1 0.750 x 1.125 0.213 1.41 1800 601D188F025GJ1 0.750 x 1.625 0.110 2.27 2700 601D278F025GL1 0.750 x 2.125 0.073 3.11 3900 601D398F025GP1 0.750 x 2.625 0.056 3.91 4700 601D478F025GS1 0.750 x 3.125 0.045 4.68 5600 601D568F025GT1 0.750 x 3.625 0.038 5.43 1500 601D158F025HE1 0.875 x 1.125 0.157 1.81 2700 601D278F025HJ1 0.875 x 1.625 0.076 2.98 3900 601D398F025HL1 0.875 x 2.125 5600 601D568F025HP1 0.875 x 2.625 6800 601D688F025HS1 8200 1800 3900 No. 20 AWG (0.032) 0.125 2.14 0.096 2.68 0.052 4.04 0.040 5.04 0.875 x 3.125 0.033 6.00 601D828F025HT1 0.875 x 3.625 0.028 6.91 601D188F025JE1 1.000 x 1.125 0.117 2.28 601D398F025JJ1 1.000 x 1.625 0.059 3.70 No. 18 AWG (0.040) 5600 601D568F025JL1 1.000 x 2.125 0.040 4.96 8200 601D828F025JP1 1.000 x 2.625 0.031 6.14 10 000 601D109F025JS1 1.000 x 3.125 0.027 7.15 12 000 601D129F025JT1 1.000 x 3.625 0.023 8.21 Revision: 26-Apr-13 Document Number: 42039 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 601D www.vishay.com Vishay Sprague ELECTRICAL DATA AND ORDERING INFORMATION CAPACITANCE (μF) PART NUMBER 330 680 1000 1500 1800 2200 680 1200 2200 2700 3300 3900 1000 2200 2700 3900 4700 5600 1200 2700 3900 5600 6800 8200 601D337F035FE1 601D687F035FJ1 601D108F035FL1 601D158F035FP1 601D188F035FS1 601D228F035FT1 601D687F035GE1 601D128F035GJ1 601D228F035GL1 601D278F035GP1 601D338F035GS1 601D398F035GT1 601D108F035HE1 601D228F035HJ1 601D278F035HL1 601D398F035HP1 601D478F035HS1 601D568F035HT1 601D128F035JE1 601D278F035JJ1 601D398F035JL1 601D568F035JP1 601D688F035JS1 601D828F035JT1 270 470 680 1000 1200 1500 470 1000 1500 1800 2200 2700 680 1500 2200 2700 3300 3900 1000 1800 2700 3900 4700 5600 601D277F050FE1 601D477F050FJ1 601D687F050FL1 601D108F050FP1 601D128F050FS1 601D158F050FT1 601D477F050GE1 601D108F050GJ1 601D158F050GL1 601D188F050GP1 601D228F050GS1 601D278F050GT1 601D687F050HE1 601D158F050HJ1 601D228F050HL1 601D278F050HP1 601D338F050HS1 601D398F050HT1 601D108F050JE1 601D188F050JJ1 601D278F050JL1 601D398F050JP1 601D478F050JS1 601D568F050JT1 Revision: 26-Apr-13 NOMINAL CASE SIZE DxL (in) LEAD DIAMETER W (in) 35 WVDC AT + 85 °C, SURGE = 50 V 0.625 x 1.125 0.625 x 1.625 0.625 x 2.125 No. 20 AWG (0.032) 0.625 x 2.625 0.625 x 3.125 0.625 x 3.625 0.750 x 1.125 0.750 x 1.625 0.750 x 2.125 0.750 x 2.625 0.750 x 3.125 0.750 x 3.625 0.875 x 1.125 0.875 x 1.625 0.875 x 2.125 No. 18 AWG (0.040) 0.875 x 2.625 0.875 x 3.125 0.875 x 3.625 1.000 x 1.125 1.000 x 1.625 1.000 x 2.125 1.000 x 2.625 1.000 x 3.125 1.000 x 3.625 50 WVDC AT + 85 °C, SURGE = 75 V 0.625 x 1.125 0.625 x 1.625 0.625 x 2.125 No. 20 AWG (0.032) 0.625 x 2.625 0.625 x 3.125 0.625 x 3.625 0.750 x 1.125 0.750 x 1.625 0.750 x 2.125 0.750 x 2.625 0.750 x 3.125 0.750 x 3.625 0.875 x 1.125 0.875 x 1.625 0.875 x 2.125 No. 18 AWG (0.040) 0.875 x 2.625 0.875 x 3.125 0.875 x 3.625 1.000 x 1.125 1.000 x 1.625 1.000 x 2.125 1.000 x 2.625 1.000 x 3.125 1.000 x 3.625 MAX. ESR AT 120 Hz/25 °C () MAX. RIPPLE CURRENT AT 120 Hz/85 °C (A) 0.480 0.231 0.154 0.118 0.095 0.080 0.266 0.133 0.087 0.068 0.054 0.046 0.182 0.091 0.062 0.047 0.039 0.033 0.146 0.071 0.048 0.037 0.030 0.026 0.84 1.40 1.93 2.42 2.91 3.40 1.26 2.06 2.84 3.52 4.25 4.95 1.68 2.73 3.67 4.61 5.46 6.33 2.04 3.35 4.52 5.62 6.66 7.66 0.519 0.249 0.165 0.128 0.107 0.087 0.285 0.139 0.095 0.071 0.060 0.050 0.196 0.099 0.067 0.051 0.042 0.036 0.148 0.077 0.052 0.040 0.033 0.028 0.81 1.35 1.87 2.33 2.76 3.28 1.22 2.02 2.73 3.45 4.08 4.76 1.62 2.63 3.55 4.44 5.28 6.12 2.03 3.23 4.37 5.44 6.47 7.45 Document Number: 42039 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 601D www.vishay.com Vishay Sprague ELECTRICAL DATA AND ORDERING INFORMATION CAPACITANCE (μF) PART NUMBER 220 470 680 820 1000 1200 390 820 1200 1500 1800 2200 680 1200 1800 2200 2700 3900 820 1800 2700 3300 3900 4700 601D227F063FE1 601D477F063FJ1 601D687F063FL1 601D827F063FP1 601D108F063FS1 601D128F063FT1 601D397F063GE1 601D827F063GJ1 601D128F063GL1 601D158F063GP1 601D188F063GS1 601D228F063GT1 601D687F063HE1 601D128G063HJ1 601D188F063HL1 601D228F063HP1 601D278F063HS1 601D398F063HT1 601D827F063JE1 601D188F063JJ1 601D278F063JL1 601D338F063JP1 601D398F063JS1 601D478F063JT1 68 120 180 270 330 390 120 270 390 470 560 680 180 390 560 680 820 1000 270 470 820 1000 1200 1500 601D686F100FE1 601D127F100FJ1 601D187F100FL1 601D277F100FP1 601D337F100FS1 601D397F100FT1 601D127F100GE1 601D277F100GJ1 601D387F100GL1 601D477F100GP1 601D567F100GS1 601D687F100GT1 601D187F100HE1 601D397F100HJ1 601D567F100HL1 601D687F100HP1 601D827F100HS1 601D108F100HT1 601D277F100JE1 601D477F100JJ1 601D827F100JL1 601D108F100JP1 601D128F100JS1 601D157F100JT1 Revision: 26-Apr-13 NOMINAL CASE SIZE DxL (in) LEAD DIAMETER W (in) 63 WVDC AT + 85 °C, SURGE = 90 V 0.625 x 1.125 0.625 x 1.625 0.625 x 2.125 No. 20 AWG (0.032) 0.625 x 2.625 0.625 x 3.125 0.625 x 3.625 0.750 x 1.125 0.750 x 1.625 0.750 x 2.125 0.750 x 2.625 0.750 x 3.125 0.750 x 3.625 0.875 x 1.125 0.875 x 1.625 0.875 x 2.125 No. 18 AWG (0.040) 0.875 x 2.625 0.875 x 3.125 0.875 x 3.625 1.000 x 1.125 1.000 x 1.625 1.000 x 2.125 1.000 x 2.625 1.000 x 3.125 1.000 x 3.625 100 WVDC AT + 85 °C, SURGE = 150 V 0.625 x 1.125 0.625 x 1.625 0.625 x 2.125 No. 20 AWG (0.032) 0.625 x 2.625 0.625 x 3.125 0.625 x 3.625 0.750 x 1.125 0.750 x 1.625 0.750 x 2.125 0.750 x 2.625 0.750 x 3.125 0.750 x 3.625 0.875 x 1.125 0.875 x 1.625 0.875 x 2.125 No. 18 AWG (0.040) 0.875 x 2.625 0.875 x 3.125 0.875 x 3.625 1.000 x 1.125 1.000 x 1.625 1.000 x 2.125 1.000 x 2.625 1.000 x 3.125 1.000 x 3.625 MAX. ESR AT 120 Hz/25 °C () MAX. RIPPLE CURRENT AT 120 Hz/85 °C (A) 0.563 0.269 0.178 0.134 0.111 0.095 0.304 0.150 0.105 0.080 0.062 0.053 0.210 0.109 0.070 0.054 0.045 0.038 0.158 0.081 0.055 0.042 0.034 0.029 0.78 1.30 1.80 2.27 2.70 3.13 1.18 1.94 2.59 3.26 3.99 4.62 1.57 2.50 3.47 4.31 5.12 5.98 1.97 3.14 4.25 5.31 6.31 7.29 1.714 0.869 0.561 0.415 0.330 0.274 0.986 0.461 0.302 0.230 0.183 0.152 0.632 0.308 0.205 0.155 0.124 0.108 0.469 0.226 0.152 0.120 0.093 0.081 0.444 0.725 1.010 1.290 1.570 1.840 0.656 1.110 1.530 1.920 2.330 2.730 0.903 1.490 2.030 2.560 3.080 3.530 1.140 1.880 2.560 3.140 3.830 4.370 Document Number: 42039 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 601D www.vishay.com Vishay Sprague ELECTRICAL DATA AND ORDERING INFORMATION CAPACITANCE (μF) PART NUMBER NOMINAL CASE SIZE DxL (in) LEAD DIAMETER W (in) MAX. ESR AT 120 Hz/25 °C () MAX. RIPPLE CURRENT AT 120 Hz/85 °C (A) 33 601D336F150FE1 0.625 x 1.125 3.518 0.310 68 601D686F150FJ1 0.625 x 1.625 1.677 0.522 150 WVDC AT + 85 °C, SURGE = 200 V 100 601D107F150FL1 0.625 x 2.125 120 601D127F150FP1 0.625 x 2.625 150 601D157F150FS1 0.625 x 3.125 0.672 1.100 180 601D187F150FT1 0.625 x 3.625 0.560 1.290 0.451 No. 20 AWG (0.032) 1.114 0.718 0.842 0.907 56 601D566F150GE1 0.750 x 1.125 2.089 100 601D107F150GJ1 0.750 x 1.625 1.033 0.740 150 601D157F150GL1 0.750 x 2.125 0.683 1.020 220 601D227F150GP1 0.750 x 2.625 0.511 1.290 270 601D277F150GS1 0.750 x 3.125 0.409 1.560 330 601D337F150GT1 0.750 x 3.625 0.341 1.820 82 601D826F150HE1 0.875 x 1.125 1.395 0.608 150 601D157F150HJ1 0.875 x 1.625 0.695 0.989 270 601D277F150HL1 0.875 x 2.125 330 601D337F150HP1 0.875 x 2.625 390 601D397F150HS1 470 601D477F150HT1 100 220 0.451 1.370 0.345 1.710 0.875 x 3.125 0.273 2.080 0.875 x 3.625 0.226 2.440 601D107F150JE1 1.000 x 1.125 1.082 0.753 601D227F150JJ1 1.000 x 1.625 0.502 1.260 No. 18 AWG (0.040) 330 601D337F150JL1 1.000 x 2.125 0.328 1.740 470 601D477F150JP1 1.000 x 2.625 0.244 2.200 560 601D566F150JS1 1.000 x 3.125 0.195 2.650 680 601D687F150JT1 1.000 x 3.625 0.165 3.070 200 WVDC AT + 85 °C, SURGE = 250 V 27 601D276F200FE1 0.625 x 1.125 3.985 0.292 56 601D566F200FJ1 0.625 x 1.625 1.892 0.491 82 601D826F200FL1 0.625 x 2.125 100 601D107F200FP1 0.625 x 2.625 120 601D127F200FS1 0.625 x 3.125 0.761 1.032 150 601D157F200FT1 0.625 x 3.625 0.651 1.190 47 601D476F200GE1 0.750 x 1.125 2.354 0.424 82 601D826F200GJ1 0.750 x 1.625 1.142 0.704 120 601D127F200GL1 0.750 x 2.125 0.774 0.956 180 601D187F200GP1 0.750 x 2.625 0.578 1.210 220 601D227F200GS1 0.750 x 3.125 0.462 1.460 270 601D277F200GT1 0.750 x 3.625 0.385 1.710 120 601D127F200HJ1 0.875 x 1.625 0.787 0.930 180 601D187F200HL1 0.875 x 2.125 0.521 1.270 270 601D277F200HP1 0.875 x 2.625 0.390 1.610 330 601D337F200HS1 0.875 x 3.125 0.302 1.970 390 601D397F200HT1 0.875 x 3.625 0.254 2.300 82 601D826F200JE1 1.000 x 1.125 1.128 0.737 180 601D187F200JJ1 1.000 x 1.625 0.560 1.200 No. 20 AWG (0.032) No. 18 AWG (0.040) 1.242 0.680 0.925 0.865 270 601D277F200JL1 1.000 x 2.125 0.365 1.650 390 601D397F200JP1 1.000 x 2.625 0.278 2.060 470 601D477F200JS1 1.000 x 3.125 0.221 2.490 560 601D567F200JT1 1.000 x 3.625 0.183 2.910 Revision: 26-Apr-13 Document Number: 42039 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 601D www.vishay.com Vishay Sprague ELECTRICAL DATA AND ORDERING INFORMATION CAPACITANCE (μF) PART NUMBER 15 33 47 68 82 100 27 56 100 120 150 180 47 100 150 180 220 270 56 120 180 270 330 390 601D156F250FE1 601D336F250FJ1 601D476F250FL1 601D686F250FP1 601D826F250FS1 601D107F250FT1 601D276F250GE1 601D566F250GJ1 601D107F250GL1 601D127F250GP1 601D157F250GS1 601D187F250GT1 601D476F250HE1 601D107F250HJ1 601D157F250HL1 601D187F250HP1 601D227F250HS1 601D277F250HT1 601D566F250JE1 601D127F250JJ1 601D187F250JL1 601D277F250JP1 601D337F250JS1 601D397F250JT1 12 27 39 47 56 68 22 47 68 100 120 150 33 68 100 150 180 220 47 100 150 180 220 270 601D126F300FE1 601D276F300FJ1 601D396F300FL1 601D476F300FP1 601D566F300FS1 601D686F300FT1 601D226F300GE1 601D476F300GJ1 601D686F300GL1 601D107F300GP1 601D127F300GS1 601D157F300GT1 601D336F300HE1 601D686F300HJ1 601D107F300HL1 601D157F300HP1 601D187F300HS1 601D227F300HT1 601D476F300JE1 601D107F300JJ1 601D157F300JL1 601D187F300JP1 601D227F300JS1 601D277F300JT1 Revision: 26-Apr-13 NOMINAL CASE SIZE DxL (in) LEAD DIAMETER W (in) 250 WVDC AT + 85 °C, SURGE = 300 V 0.625 x 1.125 0.625 x 1.625 0.625 x 2.125 No. 20 AWG (0.032) 0.625 x 2.625 0.625 x 3.125 0.625 x 3.625 0.750 x 1.125 0.750 x 1.625 0.750 x 2.125 0.750 x 2.625 0.750 x 3.125 0.750 x 3.625 0.875 x 1.125 0.875 x 1.625 0.875 x 2.125 No. 18 AWG (0.040) 0.875 x 2.625 0.875 x 3.125 0.875 x 3.625 1.000 x 1.125 1.000 x 1.625 1.000 x 2.125 1.000 x 2.625 1.000 x 3.125 1.000 x 3.625 300 WVDC AT + 85 °C, SURGE = 350 V 0.625 x 1.125 0.625 x 1.625 0.625 x 2.125 No. 20 AWG (0.032) 0.625 x 2.625 0.625 x 3.125 0.625 x 3.625 0.750 x 1.125 0.750 x 1.625 0.750 x 2.125 0.750 x 2.625 0.750 x 3.125 0.750 x 3.625 0.875 x 1.125 0.875 x 1.625 0.875 x 2.125 No. 18 AWG (0.040) 0.875 x 2.625 0.875 x 3.125 0.875 x 3.625 1.000 x 1.125 1.000 x 1.625 1.000 x 2.125 1.000 x 2.625 1.000 x 3.125 1.000 x 3.625 MAX. ESR AT 120 Hz/25 °C () MAX. RIPPLE CURRENT AT 120 Hz/85 °C (A) 7.136 3.228 2.132 1.591 1.270 1.057 3.614 1.721 1.130 0.880 0.690 0.568 2.369 1.148 0.753 0.574 0.464 0.375 1.708 0.829 0.548 0.410 0.328 0.274 0.22 0.38 0.52 0.66 0.80 0.94 0.34 0.57 0.79 0.98 1.20 1.41 0.47 0.77 1.06 1.33 1.59 1.89 0.60 0.98 1.34 1.69 2.04 2.38 8.217 3.809 2.479 1.839 1.461 1.231 4.164 1.931 1.294 0.953 0.795 0.672 2.712 1.296 0.886 0.679 0.519 0.441 1.973 0.947 0.637 0.468 0.386 0.318 0.20 0.35 0.48 0.61 0.75 0.87 0.32 0.54 0.74 0.94 1.12 1.30 0.44 0.72 0.98 1.22 1.50 1.74 0.56 0.92 1.25 1.59 1.88 2.21 Document Number: 42039 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000