LED Driver High Power Constant Current LED Driver Wall-mount and Hook-up Wire Total Power 10 Watts max. Input Voltages 100-250 VAC Number of Outputs One SPECIAL FEATURES Product Specifications ANZ#: 128d ,June 25, 2007 ELECTRICAL SPECIFICATIONS • Compact size that maximize design flexibility. Input range Frequency • 2.56” x 1.38” x 0.90” (LxWxH) Inrush current • Full range AC input Input current • Available in Wall-mount and hookup wire style Efficiency EMI filtering • High efficiency reduce total power consumption Maximum power • Tight regulated constant current output to Output regulation maximize the LED performance Hold up time Protection • Pre-adjusted C/C outputs 100 to 250 VAC, Full range 47 to 63 Hz 30.0 Amps maximum at any input range 0.3Amps maximum at 115/230 input range 65% typical at 120VAC and maximum load FCC part 15J class B, CISPR 22 class B 12W ±5% @constant current mode 10ms minimum at 120 VAC and 80% of rated load Overload protection, Short Circuit Protection ENVIRONMENTAL Operating temperature: -20 to+60 º C Storage temperature: -20 to 80 º C Humidity (Non-Condensing): 5% to 95% Cooling: Convection Vibration Frequency: 5 to 55 Hz MTBF: >100,000 Hours at full load and 25ºC ambient conditions (MIL-217E) SAFETY UL, cUL and CE certified ORDERING INFORMATION Model # Output Voltage Range (VDC) Output Current (mA) 4 ~ 12V 4 ~ 28V 4 ~ 12V 4 ~ 12V 4 ~ 12V 4 ~ 28V 4 ~ 12V 4 ~ 12V 350mA 350mA 700mA 700mA 350mA 350mA 700mA 700mA LD-CU3503AF LD-CU3536AF LD-CU7006AF LD-CU7021AF LD-PI3503AF LD-PI3536AF LD-PI7006AF LD-PI7021AF Output Power (W) 4.2-Watts 10-Watts 6.5-Watts 9-Watts 4.2-Watts 10-Watts 6.5-Watts 9-Watts MECHANICAL DRAWINGS LD-XX = Enclose type CU = Hook up wire style PI = Wall-mount style 2.56 [65.0] 2.64 [67.0] DC OUTPUT 1.46 [37.0] 1.38 [35.0] 79 [2000] AC INPUT 0.91 [23.0] LD-CU Series 1.06 [27.0] LD-PI Series INDUSTRIES CORP. 5625-A S. Arville, Las Vegas, NV 89118 Tel:702-364-9998 Fax: 702-364-1562 www.magtechind.com anz113d