LED Driver LP1090-XX-YZ-E Series Switch-Mode LED Driver Total Power 96 Watts Input Voltages 90-264 VAC or 100-277VAC Number of Outputs One SPECIAL FEATURES • • • • • • • • • • UL1310 / UL48 Class 2 certified Various DC output available, max 96-Watts Meet IP64 standards Suitable for damp or dry locations Suitable for wet location with adequate end plate and connectors Designed for outdoor or indoor applications Built-in wiring compartments for easy installation (selected models) Compact, lightweight w/ aluminum case Active PFC to conserve power consumption DIN Rail Mounting – Optional Product Specifications ANZ#: Z097d, Oct. 2, 2006 ELECTRICAL SPECIFICATIONS Input range Frequency Power Factor Crest Factor Inrush current Input current Efficiency EMI filtering Maximum power Current Adjust range Load regulation Leakage Current Hold up time ENVIRONMENTAL Protection Operating temperature: -30 to 70 º C (De-rating : 2% per º C from 50ºC ) SAFETY Storage temperature: -40 to 85 º C UL Humidity (Non-Condensing): 5% to 95% CE Cooling: Convection Vibration Frequency: 5 to 50 Hz MTBF: >100,000 Hours at full load and 25ºC ambient conditions (MIL-217F) EMC : Compliant to 47CFR, Part 2, Part15 and Cispr PUB, 22 Class B 90 to 264 VAC, Full range or 100-277VAC 47 to 63 Hz > 0.95 at full load, 115VAC 1.5 max. 40.0 Amps maximum at 230VAC, cold start, 25º C 1.5Amps maximum at 90VAC 85% typical at 230VAC and maximum load 47CFR, Part 2, Part 15 and Cispr PUB, 22 Class A 96W 30 ~ 50% ±3% 0.2mA @ 110VAC, 0.4mA @ 230VAC Half cycle minimum at 120 VAC and 80% of rated load Over-voltage, Over-current, Over-power and Short circuit protection: Auto-recovery UL1310 / UL48 Class 2 certified Certified MODEL INFORMATION – SINGLE OUTPUT Constant Voltage Mode Constant Current Mode Output Output Adjust range (Vdc) Current range (A) Voltage range (Vdc) Adjust range (A) 24 ~ 36 1.0 ~ 2.66 18 ~ 36 1.50 ~ 2.66 LP1090-36-YZ-E 18 ~ 24 1.5 ~ 4.00 12 ~ 24 2.50 ~ 4.00 LP1090-24-YZ-E 12 ~ 19 2.0 ~ 5.00 10 ~ 19 3.00 ~ 5.00 LP1090-19-YZ-E Model Numbers Total output (Watts) 96 96 96 MECHANICAL DRAWING Model Information – Single DC output LP1090-XX-YZ-E XX – DC outputs Y – AC input side plate options, refer to drawing for more details Z – DC output side plate options, refer to drawing for more details E – Aluminum enclosure length, 170, 240, 290mm, refer to drawing for more details Housing “240”, “290” – The wiring compartment is accessed through side plate only. Housing “249”, “299” – The wiring compartment can be accessed from the top plate. INDUSTRIES CORP. 5625-A S. Arville, Las Vegas, NV 89118 Tel:702-364-9998 Fax: 702-364-1562 www.magtechind.com Anz097d MECHANICAL DRAWING (AC INPUT VS. DC OUTPUT) LP1090-XX-YZ-E Y – AC input side plate options (Gland not included) Z – DC output side plast options (Gland not included) Note: End plates and liquid tight glands for wet location application can be ordered separately. Housing (E):170 0.20 [5.0] 1.38 [35.0] 7.20 [183.0] 6.69 [170.0] 7.60 [193.0] Housing (E):240 0.20 [5.0] AC Input Wiring Space 1.38 [35.0] Housing (E):249 AC Input Wiring Space 9.96 [253.0] 1.38 [35.0] 9.96 [253.0] 9.45 [240.0] 9.45 [240.0] 10.35 [263.0] 10.35 [263.0] Housing (E):290 AC Input Wiring Space 0.20 [5.0] DC output Wiring Space 1.38 [35.0] Housing (E):299 1.38 [35.0] 11.93 [303.0] 11.42 [290.0] 11.42 [290.0] 1.97 [50.0] 12.32 [313.0] 0.20 [5.0] AC Input Wiring Space 11.93 [303.0] 2.76 [70.0] 0.20 [5.0] 2.76 [70.0] 1.97 [50.0] 12.32 [313.0] INDUSTRIES CORP. 5625-A S. Arville, Las Vegas, NV 89118 Tel:702-364-9998 Fax: 702-364-1562 www.magtechind.com Anz097d