LED Driver LP1025-xx Series Switch-Mode LED Driver Total Power 25 Watts Input Voltages 90~264 VAC or 100-277VAC Number of Outputs One SPECIAL FEATURES Product Specifications ANZ#: Z106e, November 28, 2006 ELECTRICAL SPECIFICATIONS • UL1310 / UL48 Class 2 compliant • Single output, constant current or constant voltage design • IP66 compliant • Designed for outdoor or indoor applications • Compact, lightweight in plastic case • PFC to reduce power consumption Input range Frequency Power Factor Inrush current Input current Efficiency EMI filtering Maximum power Current Accuracy Load regulation ENVIRONMENTAL Ripple/Noise Operating temperature: -30 to 60 º C Leakage Current (De-rating : 1% per º C from 60~70ºC ) Hold up time Storage temperature: -40 to +85º C Humidity (Non-Condensing): 5% to 95% Protection Cooling: Convection Vibration Frequency: 5 to 50 Hz SAFETY MTBF: >100,000 Hours at full load and 25ºC UL / cUL ambient conditions (MIL-217F) EMC : Compliant to 47CFR, Part 2, Part15 and CE Cispr PUB, 22 Class B Model Number LP1025-36 LP1025-24 LP1025-12 Constant Voltage Mode Output A (mA) Watts V (DC) 36, ±5% 700 25 24, ±5% 1040 25 12, ±5% 2080 25 90 ~ 264 VAC, Full range or 100~277VAC 47 to 63 Hz > 0.92 at full load, 115VAC 20.0 Amps maximum at 230VAC, cold start, 25º C 0.4 Amps maximum at 115VAC 85% typical at maximum load 47CFR, Part 2, Part 15 and Cispr PUB, 22 Class B 25W ±1% (when applicable) ±3% N/A 300uA typ. Half cycle minimum at 120 VAC and 80% of rated load Over-voltage, Over current and Short circuit protection: Auto-recovery UL1310 / UL48 Class 2 certified Certified Model Number LP1025-36C0700 LP1025-24C1040 LP1025-12C2080 Constant Current Mode Output V (DC) A (mA) Watts 18 ~ 36 700, ±5% 25 12 ~ 24 1040, ±5% 25 8 ~ 12 2080, ±5% 25 MECHANICAL DRAWING INDUSTRIES CORP. 5625-A S. Arville, Las Vegas, NV 89118 Tel:702-364-9998 Fax: 702-364-1562 www.magtechind.com Anz106e