MAIA-007099-000100 Vector Modulator, 925 to 960 MHz Rev. V2 Features • • • • • • • • • • • • Operates 925 to 960 MHz Low Amplitude Ripple Linear Phase 50 Ohm Nominal Impedance Continuously Variable Across a Full 360 degree range Test Boards to be Available Test Boards Available Lead-Free 4x6 mm PQFN Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound 260°C Reflow Compatible RoHS* Compliant Version of MAMDCC0005 Functional Schematic Description M/A-COM's MAIA-007099-000100 is a Vector Modulator that significantly reduces the required board space compared to hybrid solutions. The monolithic passive elements will lead to greater repeatability lot-to-lot. Low amplitude ripple will provide superior performance. High intercept and compression points will contribute to more linear system performance. MAMDCC0005 is ideally suited for wireless infrastructure applications. Pin Configuration Pin No. Function Pin No. Function 1 NC 17 NC 2 NC 18 NC 3 NC 19 NC 4 NC 20 NC 5 NC 21 NC 6 NC 22 NC 7 NC 23 NC 8 NC 24 BIAS 2B 9 BIAS 1A 25 NC M/A-COM’s MADR-007131-000100 Dual Linearizer is designed to simplify the control of Vector Modulators. See Figure 1 and App Note AN3001. Ordering Information 10 NC 26 GND Part Number Package 11 GND 27 RF OUT MAIA-007099-000100 Bulk Packaging 12 RF IN 28 GND MAIA-007099-0001TR 1000 piece reel 13 GND 29 NC MAIA-007099-0001TB Sample Test Board 14 NC 30 BIAS 1B 15 BIAS 2A 31 NC 16 NC 32 NC Note: Reference Application Note M513 for reel size information. The exposed pad centered on the package bottom must be connected to RF and DC ground. (For PQFN Packages) * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAIA-007099-000100 Vector Modulator, 925 to 960 MHz Rev. V2 Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Test Conditions Frequency Units Min Typ Max Impedance — — Ohms — 50 — Reference Loss Z = 50 Ohms 925 — 960 MHz dB -14.5 — -11.5 Attenuation Range Z = 50 Ohms Above Reference Loss 925 — 960 MHz dB 10 — — Phase Shift Range Z = 50 Ohms, Over minimum Attenuation Range 925 — 960 MHz deg 0 — 360 Amplitude Ripple Z = 50 Ohms, Ref Loss to 10 dB above Ref Loss 925 — 960 MHz dB — ± 0.05 ± 0.15 Deviation from Linear Phase Z = 50 Ohms, Ref Loss to 10 dB above Ref Loss 925 — 960 MHz deg — — ± 0.75 Return Loss - Input Ref Loss 5 to 10 dB above Ref Loss 925 — 960 MHz 925 — 960 MHz dB dB 12 15 16 18 — — Return Loss - Output Ref Loss 5 dB 10 dB 925 — 960 MHz 925 — 960 MHz 925 — 960 MHz dB dB dB 8.5 11.5 14 15 18 18 — — — Input IP3 Over 10 dB Attenuation Range 925 — 960 MHz dBm — +41 — Input P1dB Over 10 dB Attenuation Range 925 — 960 MHz dBm — +29 — Noise Figure Over 10 dB Attenuation Range 925 — 960 MHz dB — — Note 1 Switching Speed 50% Control to 10% / 90% RF — ns — 1000 — I Supply — — mA — — 25 1. Noise figure is approximately equal to the absolute attenuation. Recommended PCB Configuration Absolute Maximum Ratings 2,3 Parameter Max. Input Power 0.8 to 1.1 GHz Other Frequencies DC Voltages4 Vbias1 or Vbasis2 DC Current Absolute Maximum +30 dBm +24 dBm +1.0V 50 mA Max per Bias Operating Temperature -40°C to +85°C Storage Temperature -65°C to +125°C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. 4. Note that external dropping resistors are required to limit the current and voltage on the PIN diodes. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAIA-007099-000100 Vector Modulator, 925 to 960 MHz Rev. V2 Phase and Attenuation of MAIA-007099-000100, Vector Modulator Linearized with MADR-007131-000100 Dual Linearizer5,6,7,8 Figure 1A (y) 90° 45° bias 1 = 0.0V 0.5V bias 2 = 5.0V 3.5V 3.0V 1.0V (x) 0° 2.5V 2.0V 1.5V 2.0V 1.5V 1.0V 2.5V 3.0V 3.5V bias 1 = 5.0V 0.5V bias 2 = 0.0V Figure 1B (y) 90° bias 1 = 0V bias 2 = +5V 45° bias 1 = 0V bias 2 = 0V (x) 0° Loss = 23.5 dB Loss = 18.5 dB bias 1 = +5V bias 2 = +5V Loss = 13.5 dB bias 1 = +5V bias 2 = 0V Reflection coefficient = 0.5 5. Tic marks on x,y axes refer to reflection coefficient in increments of 0.1V. Reflection coefficients vary from -0.5 to +0.5 on both the x and y axes. 6. Data is for vector modulators driven by linearizers. See Application Note AN3001. 7. Inputs to the linearizers vary from 0 to 5V. 8. The phase with the inputs to both linearizers set to +5V is arbitrarily called zero degrees. 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAIA-007099-000100 Vector Modulator, 925 to 960 MHz Rev. V2 Phase and Attenuation of MAIA-007099-000100, Vector Modulator with Current Drive9,10 Figure 2A (y) 90° 45° bias 1 = 0 µA 2.3 µA bias 2 = 28 mA 5.3 mA 2.5 mA 9.9 µA (x) 0° 588 µA 47.7 µA 38.9 µA 9.9 µA 38.9 µA 47.7 µA 588 µA 2.5 mA 5.3 mA bias 1 = 28 mA 2.3 µA bias 2 = 0 µA Figure 2B (y) 90° bias 1 = 0 µA bias 2 = 28 mA 45° bias 1 = 0µA bias 2 = 0µA (x) 0° Loss = 23.5 dB Loss = 18.5 dB bias 1 = 28 mA bias 2 = 28 mA Loss = 13.5 dB bias 1 = 28 mA bias 2 = 0 µA Reflection coefficient = 0.5 9. Tic marks on x,y axes refer to reflection coefficient in increments of 0.1. Reflection coefficients vary from –0.5 to +0.5 on both the x and y axes. 10.The phase with the inputs to both linearizers set to +28 mA is arbitrarily called zero degrees. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAIA-007099-000100 Vector Modulator, 925 to 960 MHz Rev. V2 Schematic with Off-Chip Components Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Moisture Sensitivity The MSL rating for this part is defined as Level 2 per IPC/JEDEC J-STD-020. Parts shall be stored and/or baked as required for MSL Level 2 parts. CSP-6, Lead-Free, 4 x 6 mm, 32-lead, PQFN† † Reference Application Note M538 for lead-free solder reflow recommendations. 5 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.