SBM3045VDC UlTRA LOW VF SCHOTTKY RECTIFIER VOLTAGE 45 Volts 30 Amperes CURRENT FEATURES 0.189(4.8) 0.137(4.4) 0.409(10.4) 0.387(9.80) • Ultra Low forward voltage drop, low power losses 0.055(1.4) 0.047(1.2) 0.357(9.1) 0.335(8.5) 0.418(10.6) 0.378(9.60) • High efficiency operation • Lead free in comply with EU RoHS 2011/65/EU directives 0.110(2.8) 0.236(6.0) 0.197(5.0) MECHANICAL DATA 0.026(0.7) 0.011(0.3) 2 Case : D PAK Molded Plastic 0.055(1.4) 0.039(1.0) 0.35(0.9)MAX. 0.108(2.75) 0.092(2.35) 0.108(2.75) 0.092(2.35) Terminals : Solderable per MIL-STD-750, Method 2026 Polarity : As marked Weight: 0.0514 ounces, 1.46 grams. MAXIMUM RATINGS(TA=25oC unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage SYMBOL VALUE UNIT VRRM 45 V Maximum average forward rectified current per diode per device I F(AV) 30 15 A Peak forward surge current 8.3ms single half sine-wave superimposed on rated load per diode I FSM 300 A CJ 1100 pF RJC 3.5 TJ -55 to + 150 o C TSTG -55 to + 150 o C Typical junction capacitance (V R=4V, f=1MHz) Typical thermal resistance per diode (Note 1) Operating junction temperature range Storage temperature range o C/W Note : 1. Mounted on infinite heatsink. ELECTRICAL CHARACTERISTICS(TA=25oC unless otherwise noted) PARAMETER Breakdown voltage per diode Instantaneous forward voltage per diode Reverse current per diode June 18,2013-REV.00 SYMBOL TEST CONDITIONS VBR I R=0.5mA VF I F=1A I F=5A I F=15A I F=1A I F=5A I F=15A TJ=25oC TJ=125oC MIN. TYP. MAX. UNIT 45 - - V - 0.28 0.35 0.44 0.17 0.27 0.4 0.48 - V V VR=36V TJ=25oC TJ=125oC - 86 20 - A mA VR=45V TJ=25oC TJ=125oC - 28 320 - A mA IR PAGE . 1 IF, Forward Current (A) 16 14 12 10 8 6 4 Per Diode 2 0 0 25 50 75 100 125 150 TC, Case Temperature (°C) CJ, Junction Capacitance (pF) SBM3045VDC 100 10 Per Diode 1 1 10 100 VR, Reverse Bias Voltage (V) Fig.2 Typical Junction Capacitance 100 100 10 IF, Forward Current (A) IR, Reverse Current (mA) Fig.1 Forward Current Derating Curve 1000 TJ = 125°C TJ = 150°C 1 TJ = 75°C 0.1 TJ = 25°C Per Diode 0.01 10 20 30 40 50 60 70 80 90 100 TJ = 150°C 10 TJ = 125°C TJ = 75°C 1 TJ = 25°C 0 Percent of Rated Peak Reverse Voltage (%) Fig.3 Typical Reverse Characteristics June 18,2013-REV.00 Per Diode 0.1 0.2 0.4 0.6 0.8 VF, Forward Voltage (V) Fig.4 Typical Forward Characteristics PAGE . 2 SBM3045VDC MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 0.8K per 13" plastic Reel June 18,2013-REV.00 PAGE . 3 SBM3045VDC Part No_packing code_Version SBM3045VDC_R2_00001 SBM3045VDC_R2_10001 For example : RB500V-40_R2_00001 Serial number Version code means HF Part No. Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING June 18,2013-REV.00 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 3 SBM3045VDC Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. June 18,2013-REV.00 PAGE . 4