SVM845L ULTRA LOW VF SCHOTTKY RECTIFIER VOLTAGE 45 Volts CURRENT 8 Amperes 0.009(0.25) • Ultra thin profile package for space constrained utilization 0.243(6.15) 0.238(6.05) 0.014(0.35) • Low thermal resistance 0.044(1.10) 0.048(1.20) • High efficiency operation 0.052(1.30) • Ultra Low forward voltage drop, low power losses 0.167(4.25) • Ideal for automated placement 0.039(1.00) 0.172(4.35) FEATURES 0.136(3.45) MECHANICAL DATA 0.076(1.95) • Green molding compound as per IEC61249 Std. . (Halogen Free) 0.128(3.25) 0.085(2.15) • Lead free in comply with EU RoHS 2011/65/EU directives. Case : TO-277, Plastic 0.043(1.10) 0.035(0.90) 0.183(4.65) 0.171(4.35) Terminals : Solderable per MIL-STD-750, Method 2026 0.083(2.10) 0.262(6.65) 0.250(6.35) • Package suitable for automated handling Weight : 0.0037 ounces, 0.1073 grams Marking : SVM845L MAXIMUM RATINGS(TA=25oC unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Maximum Recurrent Peak Reverse Voltage VRRM 45 V Maximum RMS Voltage VRMS 32 V VR 45 V Maximum Average Rectified Output Current I F(AV) 8 A Peak Forward Surge Current : 8.3ms single half sine-wave superimposed on rated load (JEDEC method) I FSM 150 A CJ 500 pF RJC RJA 15 110 TJ,TSTG -55 to + 150 Maximum DC Blocking Voltage Typical Junction Capacitance (V R=4V, f=1MHz) Typical Thermal Resistance (Note 1) (Note 2) Operating Junction Temperature Range And Storage Temperature Range NOTES : 1.Mounted on an FR4 PCB, single-sided copper, with 100cm 2.Mounted on an FR4 PCB, single-sided copper, mini pad. June 6,2013-REV.00 2 o C/W o C copper pad area PAGE . 1 SVM845L o ELECTRICAL CHARACTERISTICS (TA=25 C unless otherwise noted) SYMBOL Instantaneous forward voltage IF, Forward Current (A) I F=1A I F=5A I F=8A I F=1A I F=5A I F=8A VF Reverse current TEST CONDITIONS - 20 250 - A mA 125 150 TJ = 125°C 1 TJ = 75°C 0.1 TJ = 25°C 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig.3 Typical Reverse Characteristics June 6,2013-REV.00 100 10 1 1 10 100 VR, Reverse Bias Voltage (V) Fig.2 Typical Junction Capacitance IF, Forward Current (A) IR, Reverse Current (mA) 10 40 1000 100 TJ = 150°C 20 V TA=25oC TA=125oC Fig.1 Forward Current Derating Curve 0.01 V VR=45V TC, Case Temperature (°C) 100 0.5 - A 2 100 0.3 0.4 0.45 0.21 0.35 0.42 - 4 75 - UNIT 55 6 50 MAX. - IR 25 TYP. TA=25oC 8 0 TA=125oC MIN. VR=36V 10 0 TA=25oC CJ, Junction Capacitance (pF) PARAMETER TJ = 150°C 10 TJ = 125°C TJ = 75°C 1 TJ = 25°C 0.1 0 0.2 0.4 0.6 0.8 VF, Forward Voltage (V) Fig.4 Typical Forward Characteristics PAGE . 2 SVM845L MOUNTING PAD LAYOUT 0.038 0.046 (0.97) (1.18) 0.083 (2.10) 0.138 (3.50) 0.055 (1.40) 0.183 (4.65) ORDER INFORMATION • Packing information T/R - 5K per 13" plastic Reel June 6,2013-REV.00 PAGE . 3 SVM845L Part No_packing code_Version SVM845L_R2_00001 For example : RB500V-40_R2_00001 Serial number Part No. Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING June 6,2013-REV.00 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 4 SVM845L Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. June 6,2013-REV.00 PAGE . 5