74LVC1G97 CONFIGURABLE MULTIPLE-FUNCTION GATE Description Pin Assignments (Top View) The 74LVC1G97 is a single 3-input positive configurable multiple function gate with a standard push-pull output. The (Top View) 6 In2 In1 1 output state is determined by eight patterns of 3-bit input. The user can chose the logic functions MUX, AND, OR, 5 Vcc GND 2 In1 1 6 In 2 GND 2 5 Vcc NAND, NOR, inverter or non-inverting buffer. All inputs can In0 3 NEW PRODUCT be connected to ground or Vcc as required. The device is designed for operation with a power supply range of 1.65V to 4 Y In0 3 4 Y SOT363 SOT26 5.5V. The inputs are tolerant to 5.5V allowing this device to (Top View) be used in a mixed voltage environment. The device is fully In1 1 specified for partial power down applications using IOFF. GND 2 The IOFF circuitry disables the output preventing damaging current backflow when the device is powered down. The In0 3 user is reminded that the device can simulate several types 6 In 2 5 Vcc 4 Y DFN1410 (Top View) In1 GND In0 1 6 2 5 3 4 In2 Vcc Y DFN1010 of logic gates but may respond differently due to the Schmitt action at the inputs. Features Applications • Wide Supply Voltage Range from 1.65V to 5.5V • Voltage Level Shifting • ± 24mA Output Drive at 3.3V • General Purpose Logic • CMOS low power consumption • Power Down Signal Isolation • IOFF Supports Partial-Power-Down Mode Operation • Wide array of products such as: • Inputs accept up to 5.5V o PCs, networking, notebooks, netbooks, PDAs • ESD Protection Exceeds JESD 22 o Computer peripherals, hard drives, CD/DVD ROM TV, DVD, DVR, set top box o 200-V Machine Model (A115-A) o o 2000-V Human Body Model (A114-A) o Cell Phones, Personal Navigation / GPS • Latch-Up Exceeds 100mA per JESD 78, Class II o MP3 players ,Cameras, Video Recorders • Range of Package Options • SOT26, SOT363, DFN1410, and DFN1010: Available in • Lead Free Finish/ RoHS Compliant (Note 1) “Green” Molding Compound (no Br, Sb) Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html. 74LVC1G97 Document number: DS35127 Rev. 3 - 2 1 of 14 www.diodes.com July 2011 © Diodes Incorporated 74LVC1G97 CONFIGURABLE MULTIPLE-FUNCTION GATE Pin Descriptions Pin Name Description In1 GND In0 Y Data Input Ground Data Input Data Output VCC Supply Voltage Data Input NEW PRODUCT In2 Logic Diagram Function Table Inputs Output In2 In1 In0 Y L L L L H H H L L H H L L H L H L H L H L L L H H L H L H H H H 74LVC1G97 Document number: DS35127 Rev. 3 - 2 2 of 14 www.diodes.com July 2011 © Diodes Incorporated 74LVC1G97 CONFIGURABLE MULTIPLE-FUNCTION GATE NEW PRODUCT Logic Configurations Vcc A Y B B A 1 6 2 5 3 4 A Y Y B Configuration 3 2-Input NAND Gate with B Input Inverted 2-Input OR Gate with A Input Inverted Function Selection Table Logic Function 2-to-1 Data Selector 1 2-input AND gate 2-input AND with inverted input 2-input NOR with inverted input 2-input OR 2-input NOR with both inputs inverted 1-input Inverter 74LVC1G97 Document number: DS35127 Rev. 3 - 2 Configuration 3 of 14 www.diodes.com 2 3,4 3,4 5 2 6 July 2011 © Diodes Incorporated 74LVC1G97 CONFIGURABLE MULTIPLE-FUNCTION GATE Absolute Maximum Ratings (Note 2) Symbol Description ESD HBM Human Body Model ESD Protection ESD MM Machine Model ESD Protection NEW PRODUCT Unit 2 KV 200 V Supply Voltage Range -0.5 to 6.5 V VI Input Voltage Range -0.5 to 6.5 V VO Voltage applied to output in high impedance or IOFF state -0.5 to 6.5 V VO Voltage applied to output in high or low state -0.3 to VCC +0.5 V IIK Input Clamp Current VI<0 -50 mA IOK Output Clamp Current -50 mA IO Continuous output current ±50 mA ±100 mA TJ Operating Junction Temperature -40 to 150 °C Storage Temperature -65 to 150 °C VCC Continuous current through Vdd or GND TSTG Notes: Rating 2. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. Recommended Operating Conditions (Note 3) Symbol VCC Operating Voltage VI Input Voltage VO Output Voltage Parameter Min Max Unit Operating Data retention only 1.65 1.5 5.5 V V 0 5.5 V 0 VCC V VCC = 1.65V IOH IOL Δt/ΔV TA Notes: High-level output current Low-level output current Input transition rise or fall rate -4 VCC = 2.3V -8 VCC = 3V -16 -24 VCC = 4.5V -32 VCC = 1.65V 4 VCC = 2.3V 8 16 VCC = 3V mA mA 24 VCC = 4.5V 32 VCC = 1.8V ± 0.15V, 2.5V ± 0.2V 20 VCC = 3.3V ± 0.3V 10 VCC = 5V ± 0.5V 5 Operating free-air temperature -40 125 ns/V ºC 3. Unused inputs should be held at Vcc or Ground. 74LVC1G97 Document number: DS35127 Rev. 3 - 2 4 of 14 www.diodes.com July 2011 © Diodes Incorporated 74LVC1G97 CONFIGURABLE MULTIPLE-FUNCTION GATE Electrical Characteristics TA = -40°C to 85°C (All typical values are at VCC = 3.3V, TA = 25°C) Symbol NEW PRODUCT VT+ VT- ΔVT Parameter Test Conditions Positive-going input threshold voltage Negative-going input threshold voltage Hysteresis (VT+ - VT-) IOH = -100μA VOH High Level Output Voltage VCC Min 1.65V 2.3V 3V 4.5V 5.5V 0.70 1.11 1.50 2.16 2.61 1.20 1.60 2.00 2.74 3.33 1.65V 2.3V 3V 4.5V 0.30 0.58 0.80 1.21 0.72 1.00 1.30 1.95 5.5V 1.65V 1.45 0.30 2.35 0.62 2.3V 3V 4.5V 5.5V 0.40 0.35 0.55 0.60 0.80 1.00 1.10 1.20 1.65V to 5.5V VCC – 0.1 IOH = -4mA 1.65V 1.2 IOH = -8mA 2.3V 1.9 IOH = -16mA 3V IOH = -24mA VOL High-level Input Voltage IOH = -32mA 4.5V IOL = 100μA 0.1 IOL = 8mA 2.3V 0.3 3V Input Current VI = 5.5 V or GND IOFF VI or VO = 5.5V ICC Supply Current VI = 5.5V of GND IO=0 Additional Supply Current One input at VCC –0.6 V Other inputs at VCC or GND Document number: DS35127 Rev. 3 - 2 3.8 0.45 Power Down Leakage Current 74LVC1G97 2.3 1.65V IOL = 16mA Unit V 2.4 1.65V to 5.5V IOL = 32mA ΔICC Max IOL = 4mA IOL = 24mA II Typ. 0.4 V 0.55 4.5V 0.55 0 to 5.5V ±5 μA 0 ± 10 μA 1.65V to 5.5V 10 μA 3V to 5.5V 500 μA 5 of 14 www.diodes.com July 2011 © Diodes Incorporated 74LVC1G97 CONFIGURABLE MULTIPLE-FUNCTION GATE Electrical Characteristics TA = -40 °C to 125 °C (All typical values are at Vcc = 3.3V, TA = 25°C) Symbol NEW PRODUCT VT+ VT- ΔVT Parameter Test Conditions VCC Min 1.65V 2.3V 3V 4.5V 5.5V 0.70 1.11 1.50 2.16 2.61 1.20 1.60 2.00 2.74 3.33 1.65V 2.3V 3V 4.5V 0.30 0.58 0.80 1.21 0.75 1.03 1.33 1.95 5.5V 1.65V 1.45 0.30 2.35 0.62 2.3V 3V 4.5V 5.5V 0.37 0.32 0.50 0.55 0.80 1.00 1.20 1.40 1.65V to 5.5V VCC – 0.1 IOH = -4mA 1.65V 0.95 IOH = -8mA 2.3V 1.7 Positive-going input threshold voltage Negative-going input threshold voltage Hysteresis (VT+ - VT-) IOH = -100μA VOH High Level Output Voltage IOH = -16mA 3V IOH = -24mA VOL High-level Input Voltage IOH = -32mA 4.5V IOL = 100μA 0.7 IOL = 8mA 2.3V 0.45 3V VI = 5.5 V or GND IOFF Power Down Leakage Current VI or VO = 5.5V ICC Supply Current VI = 5.5V of GND IO=0 Additional Supply Current One input at VCC –0.6 V Other inputs at VCC or GND Document number: DS35127 Rev. 3 - 2 3.4 0.1 Input Current 74LVC1G97 2.0 1.65V IOL = 16mA Unit V 1.9 1.65V to 5.5V IOL = 32mA ΔICC Max IOL = 4mA IOL = 24mA II Typ. 0.6 V 0.8 4.5V 0.8 0 to 5.5V ± 100 μA 0 ± 200 μA 1.65V to 5.5V 200 μA 3V to 5.5V 5000 μA 6 of 14 www.diodes.com July 2011 © Diodes Incorporated 74LVC1G97 CONFIGURABLE MULTIPLE-FUNCTION GATE Electrical Characteristics (All typical values are at VCC = 3.3V, TA = 25°C) Symbol CI NEW PRODUCT θJA θJC Parameter Test Conditions Input Capacitance VI = VCC – or GND Thermal Resistance Junction-to-Ambient SOT26 SOT363 DFN1410 Thermal Resistance Junction-to-Case VCC Min Typ. pF 204 371 430 (Note 4) DFN1010 510 SOT26 SOT363 52 143 (Note 4) 190 o C/W o C/W 250 DFN1010 Notes: Unit 3.5 3.3 DFN1410 Max 4. Test condition for SOT26, SOT363, DFN1410 and DFN1010 : Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout. Switching Characteristics TA = -40°C to 85°C, CL = 30 or 50pF as noted (see Figure 1) Parameter tpd From (Input) TO (OUTPUT) Any Y VCC = 1.8V ± 0.15V VCC = 2.5V ± 0.2V VCC = 3.3V ± 0.3V VCC = 5V ± 0.5V Min Max Min Max Min Max Min Max 1.0 14.4 0.7 8.3 0.7 6.3 0.7 5.1 Unit ns TA = -40°C to 125°C, CL = 30 or 50pF as noted (see Figure 1) Parameter tpd From (Input) TO (OUTPUT) Any Y VCC = 1.8V ± 0.15V VCC = 2.5V ± 0.2V VCC = 3.3V ± 0.3V VCC = 5V ± 0.5V Min Max Min Max Min Max Min Max 1.0 18.0 0.7 10.4 0.7 7.9 0.7 6.4 Unit ns Operating Characteristics TA = 25 ºC Parameter Cpd Power dissipation capacitance 74LVC1G97 Document number: DS35127 Rev. 3 - 2 Test Conditions VCC = 1.8V VCC = 2.5V VCC = 3.3V VCC = 5V Typ. Typ. Typ. Typ. f = 10 MHz 22 22 23 24 7 of 14 www.diodes.com Unit pF July 2011 © Diodes Incorporated 74LVC1G97 CONFIGURABLE MULTIPLE-FUNCTION GATE NEW PRODUCT Parameter Measurement Information Inputs VCC VM CL RL ≤2ns VCC/2 30pF 1KΩ VCC ≤2ns VCC/2 30pF 500Ω 3V ≤2.5ns ≤2.5ns 1.5V 50pF 50pF 500Ω 500Ω VI tr/tf 1.8V±0.15V VCC 2.5V±0.2V 3.3V±0.3V 5V±0.5V VCC VCC/2 Voltage Waveform Pulse Duration Voltage Waveform Propagation Delay Times Inverting and Non Inverting Outputs Figure 1. Load Circuit and Voltage Waveforms Notes: A. B. C. D. Includes test lead and test apparatus capacitance. All pulses are supplied at pulse repetition rate ≤ 10 MHz Inputs are measured separately one transition per measurement tPLH and tPHL are the same as tPD 74LVC1G97 Document number: DS35127 Rev. 3 - 2 8 of 14 www.diodes.com July 2011 © Diodes Incorporated 74LVC1G97 CONFIGURABLE MULTIPLE-FUNCTION GATE NEW PRODUCT Ordering Information Device 74LVC1G97W6-7 74LVC1G97DW-7 74LVC1G97FW4-7 74LVC1G97FZ4-7 Notes: Package Code W6 DW FW4 FZ4 Packaging (Note 5) SOT26 SOT363 DFN1010 DFN140 7” Tape and Reel Quantity Part Number Suffix 3000/Tape & Reel -7 3000/Tape & Reel -7 5000/Tape & Reel -7 5000/Tape & Reel -7 5. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. 6. The taping orientation is located on our website at http://www.diodes.com/datasheets/ap02007.pdf 74LVC1G97 Document number: DS35127 Rev. 3 - 2 9 of 14 www.diodes.com July 2011 © Diodes Incorporated 74LVC1G97 CONFIGURABLE MULTIPLE-FUNCTION GATE Marking Information NEW PRODUCT (1) SOT26, SOT363 Part Number Package Identification Code 74LVC1G97W6 74LVC1G97DW SOT26 SOT363 TY TY Part Number Package Identification Code 74LVC1G97FW4 74LVC1G97FZ4 DFN1010 DFN1410 TY TY (2) DFN1010, DFN1410 74LVC1G97 Document number: DS35127 Rev. 3 - 2 10 of 14 www.diodes.com July 2011 © Diodes Incorporated 74LVC1G97 CONFIGURABLE MULTIPLE-FUNCTION GATE Marking Information NEW PRODUCT (1) SOT26, SOT363 Part Number Package Identification Code 74LVC1G57W6 74LVC1G57DW SOT26 SOT363 TW TW Part Number Package Identification Code 74LVC1G57FW4 DFN1010 TW (2) DFN1010 74LVC1G97 Document number: DS35127 Rev. 3 - 2 11 of 14 www.diodes.com July 2011 © Diodes Incorporated 74LVC1G97 CONFIGURABLE MULTIPLE-FUNCTION GATE Package Outline Dimensions (All Dimensions in mm) NEW PRODUCT (1) Package Type: SOT26 (2) Package Type: SOT363 C L 0.10/0.30 C L 1.9 C L 1.15/1.35 6x-0.42 C L 6x-0.60 2.0/2.2 4x-0.65 PIN 1 0.40/0.45 0.65Bsc. Land Pattern Recommendation (unit:mm) 1.8/2.2 0.1/0.22 0.9/1.0 0/0.1 1.10Max. C L "A" Detail"A" 74LVC1G97 Document number: DS35127 Rev. 3 - 2 0°/8 0.25/0.40 ° 0.25 Gauge Plane 12 of 14 www.diodes.com July 2011 © Diodes Incorporated 74LVC1G97 CONFIGURABLE MULTIPLE-FUNCTION GATE 0.40Max. 0.08 C 0.235 0.95/1.05 A 0.35Typ. Pin1 Pin1 0.35Typ. 0.14/0.20(6x) 0.07Typ. 0.35/0.45(6x) 0.08 C 0.15Min. 0.95/1.05 2x- 0.20(6x) 0.15Min. 2X0.05/0.15 NEW PRODUCT B C 0.45(6x) Seating Plane Side View 0/0.05 0.08 C 0.15 0.05 C 6x- 0.13Typ. (3) Package Type: DFN1010 Land Pattern Recommendation (unit:mm) Top View C A B 0.07 Bottom View C Side View 1.35/1.45 0.550 2X- 6x-0.25 6x-0.35 Seating Plane 0.25 A 0.08 C 0.13Typ. 0.40Max. 0.10 C 6x- 0/0.05 (4) Package Type DFN1410 A 0.50Typ. 2X- (Pin #1 ID) X 45¢ . 1x 0 C 0.075¡ 0Ó.030 6x-0.25/0.35 0.95/1.05 B 4x-0.50Typ. Land Pattern Recommendation (mm) Top View 0.25 B 0.10(4x) 6x-0.15/0.25 0.10 C A B Bottom View 74LVC1G97 Document number: DS35127 Rev. 3 - 2 13 of 14 www.diodes.com July 2011 © Diodes Incorporated 74LVC1G97 CONFIGURABLE MULTIPLE-FUNCTION GATE IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). NEW PRODUCT Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2011, Diodes Incorporated www.diodes.com 74LVC1G97 Document number: DS35127 Rev. 3 - 2 14 of 14 www.diodes.com July 2011 © Diodes Incorporated