TLP222A,TLP222A-2 TOSHIBA Photocoupler Photorelay TLP222A, TLP222A-2 Telecommunications Measurement and Control Equipment Data Acquisition System Measurement Equipment Unit: mm TLP222A The Toshiba TLP222A and TLP222A-2 consist of a gallium arsenide infrared emitting diode optically coupled to a photo-MOSFET in a DIP package whose withstanding voltage is 60 V. These photorelays have higher output current rating than phototransistor-type photocoupler; hence, they are suitable for use as On/Off control for high current. • Normally open (1-form-A and 2-form-A) devices • Peak off-state voltage: 60 V (min) • Trigger LED current: 3 mA (max) • On-state current: 500 mA (max) • On-state resistance: 2 Ω (max) • Isolation voltage: 2500 Vrms (min) • UL recognized: UL1557, File No.E67349 Pin Configuration (top view) JEDEC ― JEITA ― TOSHIBA TLP222A 1 2 Weight: 0.26 g (typ.) TLP222A-2 4 11-5B2 1 8 2 7 3 6 4 5 TLP222A-2 3 1: Anode 2: Cathode 3: Drain 4: Drain 1, 3 2, 4 5 6 7 8 : Anode : Cathode : Drain D1 : Drain D2 : Drain D3 : Drain D4 JEDEC ― JEITA ― TOSHIBA 11-10C4 Weight: 0.54 g (typ.) 1 2007-10-01 TLP222A,TLP222A-2 Absolute Maximum Rating (Ta = 25°C) Characteristics Symbol Rating Unit IF 50 mA Forward current Forward current derating (Ta > = 25°C) LED ΔIF/°C −0.5 mA/°C Peak forward current IFP 1 A Reverse voltage VR 5 V Junction temperature Tj 125 °C VOFF 60 V ION 500 mA ΔION/°C −5.0 mA/°C Off-state output terminal voltage TLP222A On-state current Detector TLP222A-2 One channel operation Two channel operations TLP222A One Forward channel current operation derating TLP222A-2 > (Ta = 25°C) Two channel operations Tj 125 °C Storage temperature Junction temperature Tstg −55 to 125 °C Operating temperature Topr −40 to 85 °C Lead soldering temperature (10 s) Isolation voltage (AC, 1 min, R.H. < = 60%) (Note 1) Tsol 260 °C BVS 2500 Vrms Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: LED pins are shorted together. Detector pins are also shorted together. Recommended Operating Conditions Characteristics Supply voltage Symbol Min Typ. Max Unit VDD ⎯ ⎯ 48 V Forward current IF 5 7.5 25 mA On-state current ION ⎯ ⎯ 500 mA Operating temperature Topr −20 ⎯ 65 °C Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. Electrical Characteristics (Ta = 25°C) Characteristics LED Test Condition Min Typ. Max Unit Forward voltage VF IF = 10 mA 1.0 1.15 1.3 V Reverse current IR VR = 5 V ⎯ ⎯ 10 μA V = 0, f = 1 MHz ⎯ 30 ⎯ pF Off-state current IOFF VOFF = 60 V ⎯ ⎯ 1 μA Capacitance COFF V = 0, f = 1 MHz ⎯ 130 ⎯ pF Capacitance Detector Symbol CT 2 2007-10-01 TLP222A,TLP222A-2 Coupled Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Trigger LED current IFT ION = 500 mA ⎯ 1.6 3 mA Return LED current IFC IOFF = 100 μA 0.1 ⎯ ⎯ mA On-state resistance RON ION = 500 mA, IF= 5 mA ⎯ 1 2 Ω Min Typ. Max Unit 0.8 ⎯ pF ⎯ Ω Isolation Characteristics (Ta = 25°C) Characteristics Symbol Capacitance input to output Isolation resistance Test Condition CS VS = 0 V, f = 1 MHz ⎯ RS VS = 500 V, R.H. < = 60% 5 × 10 BVS 10 14 2500 ⎯ ⎯ AC, 1 s, in oil ⎯ 5000 ⎯ DC, 1 min, in oil ⎯ 5000 ⎯ Vdc Min Typ. Max Unit ⎯ 0.8 2 ⎯ 0.1 0.5 AC, 1 min Isolation voltage 10 Vrms Switching Characteristics (Ta = 25°C) Characteristics Symbol Turn-on time tON Turn-off time tOFF Test Condition RL = 200 Ω VDD = 20 V, IF = 5 mA (Note 2) ms Note 2: Switching time test circuit IF TLP222A 1 4 RL VDD IF VOUT VOUT 3 2 10% tON IF TLP222A-2 1 8 RL 90% tOFF VDD VOUT 2 7 3 2007-10-01 TLP222A,TLP222A-2 IF – Ta ION – Ta 600 ION (mA) 80 60 On-sate current Allowable forward current IF (mA) 100 40 20 0 −20 0 20 40 60 80 100 500 400 300 200 100 0 −20 120 0 20 Ambient temperature Ta (°C) 40 IF – V F On-state current ION (mA) (mA) Forward current IF 120 ION – VON 30 10 3 1 0.3 0.8 1 1.2 1.4 Forward voltage VF 1.6 Ta = 25°C IF = 5 mA 400 200 0 −200 −400 −600 −0.6 1.8 −0.4 (V) −0.2 0 0.2 0.4 0.6 80 100 On-state voltage VON (V) RON – Ta IFT – Ta 5 5 ION = 500 mA ION = 500 mA IFT (mA) IF = 5 mA 4 3 Trigger LED Current On-state resistance RON (Ω) 100 600 Ta = 25°C 2 1 0 −20 80 Ambient temperature Ta (°C) 100 0.1 0.6 60 0 20 40 60 80 t<1s 4 3 2 1 0 −20 100 Ambient temperature Ta (°C) 0 20 40 60 Ambient temperature Ta (°C) 4 2007-10-01 TLP222A,TLP222A-2 tON, tOFF – IF tON, tOFF – Ta 3000 Ta = 25°C 3000 VDD = 20 V Switching time tON, tOFF (μs) Switching time tON, tOFF (μs) 5000 RL = 200 Ω 1000 500 300 tOFF 100 50 tON 1000 300 tOFF 100 30 VDD = 20 V RL = 200 Ω IF = 5 mA tON 30 1 3 5 10 30 Input current 50 100 10 −20 300 IF (mA) 0 20 40 80 80 100 Ambient temperature Ta (°C) IOFF – Ta 30 Off-state current IOFF (nA) VOFF = 60 V 10 3 1 0.3 0.1 −20 0 20 40 80 80 100 Ambient temperature Ta (°C) 5 2007-10-01 TLP222A,TLP222A-2 RESTRICTIONS ON PRODUCT USE • Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively “Product”) without notice. • This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission. • Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS. • Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document. • Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. • Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. • The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. • ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. • GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product. • Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. • Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations. 6 2007-10-01