TLP170D

深圳市腾恩科技有限公司
SHENZHEN TENAND TECHNOLOGY CO.,LTD
http://www.tenand.com
TLP170D
TOSHIBA Photocoupler GaAs IRED & Photo-MOSFET
TLP170D
PBX
Modem ⋅ Fax Card
Telecommunication
Security Equipment
Measurement Equipment
Unit: mm
The Toshiba TLP170D consists of a gallium arsenide infrared emitting
diode optically coupled to a photo-MOSFET in a 4-pin SOP package.
This photorelay requires 1mA of LED current to turn it on. It is suitable
for applications that need electrical power savings.
•
SOP 4 pin (2.54SOP4): 1-Form-A
•
Peak off-state voltage: 200 V (min)
•
Trigger LED current: 1 mA (max)
•
ON-state current: 200 mA (max)
•
ON-state resistance: 8 Ω (max)
•
Isolation voltage: 1500 Vrms (min)
•
UL recognized: UL1577, file No. E67349
•
c-UL recognized
CSA Component Acceptance Service No. 5A File No.E67349
JEDEC
⎯
JEITA
⎯
TOSHIBA
11-5H1
Weight: 0.1 g (typ.)
Pin Configuration (top view)
1
4
2
3
1: Anode
2: Cathode
3: Drain
4: Drain
Internal Circuit
1
4
2
3
1
2009-05-15
TLP170D
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
IF
50
mA
Forward current derating
(Ta ≥ 25°C)
ΔIF/°C
−0.5
mA/°C
Pulse forward current
(100 μs pulse, 100 pps)
IFP
1
A
Reverse voltage
VR
5
V
Junction temperature
Tj
125
°C
VOFF
200
V
ION
200
mA
ΔION/°C
−2.0
mA/°C
Tj
125
°C
Storage temperature range
Tstg
−55 to 125
°C
Operating temperature range
Topr
−40 to 85
°C
Lead soldering temperature (10 s)
Tsol
260
°C
BVS
1500
Vrms
Forward current
LED
Off-state output terminal voltage
On-state current
Detector
On-state RMS current derating
(Ta ≥ 25°C)
Junction temperature
Isolation voltage (AC, 1 min., R.H. ≤ 60%)
(Note)
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if
the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note: Device considered a two-terminal device: pins1 and 2 shorted together and pins 3 and 4 shorted together.
Recommended Operating Conditions
Characteristics
Symbol
Min
Typ.
Max
Unit
Supply voltage
VDD
⎯
⎯
160
V
Forward current
IF
⎯
2
25
mA
ON-state current
ION
⎯
⎯
160
mA
Operating temperature
Topr
−20
⎯
65
°C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
Individual Electrical Characteristics (Ta = 25°C)
Characteristics
LED
Detector
Symbol
Test Condition
Min
Typ.
Max
Unit
Forward voltage
VF
IF = 10 mA
1.0
1.15
1.3
V
Reverse current
IR
VR = 5 V
⎯
⎯
10
μA
Capacitance
CT
V = 0, f = 1 MHz
⎯
30
⎯
pF
OFF-state current
IOFF
VOFF = 200 V
⎯
1
1000
nA
Capacitance
COFF
V = 0, f = 1 MHz
⎯
90
⎯
pF
2
2009-05-15
TLP170D
Coupled Electrical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
Trigger LED current
IFT
ION = 200 mA
⎯
0.4
1
mA
Return LED current
IFC
IOFF = 100 μA
0.1
⎯
⎯
mA
On-state resistance
RON
ION = 200 mA, IF = 2 mA
⎯
5
8
Ω
Min
Typ.
Max
Unit
0.8
⎯
pF
⎯
Ω
Isolation Characteristics (Ta = 25°C)
Characteristics
Capacitance input to output
Isolation resistance
Symbol
Test Condition
VS = 0, f = 1 MHz
CS
⎯
10
VS = 500 V, R.H. ≤ 60%
RS
5 × 10
10
1500
⎯
⎯
AC, 1 second, in oil
⎯
3000
⎯
DC, 1 minute, in oil
⎯
3000
⎯
Vdc
Min
Typ.
Max
Unit
AC, 1 minute
Isolation voltage
BVS
14
Vrms
Switching Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Turn-on time
tON
RL = 200 Ω
VDD = 20 V, IF = 2 mA
(Note2)
⎯
3.0
8.0
ms
Turn-on time
tON
RL = 200 Ω
VDD = 20 V, IF = 5 mA
(Note2)
⎯
⎯
5.0
ms
Turn-off time
tOFF
RL = 200 Ω
VDD = 20 V, IF = 2 mA
(Note2)
⎯
0.6
3.0
ms
Note2: Switching time test circuit
IF
1
4
2
3
RL
VDD
IF
VOUT
90%
VOUT
10%
tON
3
tOFF
2009-05-15
TLP170D
I F ─ Ta
I ON ─ Ta
(mA)
ION
50
40
Allowable ON-sate current
Allowable forward current
IF
(mA)
60
30
20
10
0
-40
-20
0
20
40
60
Ambient temperature
80
100
250
200
150
100
50
0
-40
-20
Ta (°C)
0
(mA)
ION
Allowable ON-sate current
Forward current
IF
(mA)
Ta = 25℃
1
0.9
1.0
1.1
1.2
Forward voltage
VF
1.3
1.4
200
150
Ta (°C)
Ta = 25℃
IF = 2mA
50
0
-50
-100
-150
-200
-250
-1.0
-0.5
0.0
0
0.5
On-sate voltage
VON
1.0
(V)
I FT ─ Ta
(mA)
0.7
I FT
(Ω)
RON
4
Trigger LED current
ON-sate resistance
100
100
(V)
7
5
80
250
RON ─ Ta
6
60
I ON ─ VON
10
0.1
0.8
40
Ambient temperature
I F ─ VF
100
20
3
ION = 200mA
IF = 2mA
t < 1s
2
1
0
-40
-20
0
20
40
Ambient temperature
60
80
100
ION = 200mA
t < 1s
0.6
0.5
0.4
0.3
0.2
0.1
0
0.0
-40
Ta (°C)
-20
0
20
40
Ambient temperature
4
60
80
100
Ta (°C)
2009-05-15
TLP170D
tON,tOFF ─ I F
tON,tOFF ─ Ta
10
tON
(ms)
VDD = 20V
tON,tOFF
0.1
tOFF
Switching time
tON,tOFF
1
Switching time
(ms)
10
tON
RL = 200Ω
Ta=25°C
0.01
0.1
1
10
Forward current
IF
100
(mA)
1
tOFF
VDD = 20V
0.1
-40
RL = 200Ω
IF = 2 mA
-20
0
20
40
Ambient temperature
60
80
100
Ta (°C)
I OFF ─ Ta
100
(nA)
1
OFF-state current
10
I OFF
VOFF = 200V
0.1
0.01
0.001
-40
-20
0
20
40
Ambient temperature
60
80
100
Ta (°C)
5
2009-05-15
TLP170D
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must also
refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the
specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
• Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public
impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the
aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or vapor.
Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,
for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology
products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign
Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software
or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
6
2009-05-15