date 02/15/2012 page 1 of 3 SERIES: SJ1-355XNG │ DESCRIPTION: 3.5 MM AUDIO JACKS FEATURES • low profile design • switch options include: – no switch – tip switch – tip and ring switch RoHS PART NUMBER KEY SJ1 - 355 X NG Base Number Switch Options 3 = no switch 4 = tip switch 5 = tip and ring switch SPECIFICATIONS parameter conditions/description min rated input voltage typ 12 rated input current contact resistance between terminal and mating plug between terminal in a closed circuit* insulation resistance at 500 Vdc voltage withstand at 50/60 Hz for 1 minute 0.3 -25 life Notes: Vdc A 50 30 mΩ mΩ 500 Vac 3 kg 500 g MΩ any direction for 10 seconds operating temperature units 1 100 insertion/withdrawl force terminal strength max 85 5,000 °C cycles *When measured at a current of less than 100 mA / 1 kHz SOLDERABILITY parameter conditions/description min typ max units wave soldering dipped in solder pot for 5±0.5 seconds at 255 260 265 °C cui.com CUI Inc │ SERIES: SJ1-355XNG │ DESCRIPTION: 3.5 MM AUDIO JACKS date 02/15/2012 │ page 2 of 3 MECHANICAL DRAWING units: mm[inches] TOLERANCE: X.X ±0.2mm X.XX ±0.1mm X.XXX ±0.05mm MATERIAL PLATING terminal 1 brass tin terminal 2 copper alloy tin terminal 3 copper alloy tin terminal 4 brass tin terminal 5 brass tin plastic PBT 11.5 0.453 1.00 0.039 12.0 0.472 1.00 0.039 3.50 0.138 7.00 0.276 7.00 0.276 3.600 0.142 10.0 0.394 10.5 0.413 4.0 0.157 0.3 (TYP) 5.0 0.197 3.0 0.118 3.0 0.118 5.0 0.197 3 5 1 2 4 10.0 0.394 5.0 0.197 4 5 2 1.60 0.063 (3 PLCS) PCB LAYOUT TOP VIEW 10.0 0.394 1 5.0 0.197 3 1.00X1.50 (5 PLCS) 1.50 0.059 (2 PLCS) Model No. SJ1-3553NG SJ1-3554NG 1 3 1 3 2 4 2 SJ1-3555NG 1 3 5 4 2 Schematic PIN 14 Ø 3.5 MATING PLUG cui.com 1 sleeve sleeve sleeve 2 tip tip tip 3 ring ring ring 4 NP tip switch tip switch 5 NP NP ring switch CUI Inc │ SERIES: SJ1-355XNG │ DESCRIPTION: 3.5 MM AUDIO JACKS date 02/15/2012 │ page 3 of 3 REVISION HISTORY rev. description date 1.0 initial release 02/07/2006 1.01 new template applied 02/15/2012 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.