For more information, please visit the product page. date 04/12/2012 page 1 of 5 SERIES: SD │ DESCRIPTION: STANDARD DIN CONNECTOR FEATURES • strain relief • 3~13 pins • 100 Vac rated RoHS PART NUMBER KEY SD - XX Pin Options 30 = 3 pins 40 = 4 pins 50 = 5 pins, 180 51 = 5 pins, 240 60 = 6 pins 70 = 7 pins 80 = 8 pins, 270 81 = 8 pins, 262 130 = 13 pins Base Number degrees degrees degrees degrees SPECIFICATIONS parameter conditions/description min rated input voltage rated input current typ max 100 12 at 100 Vac at 12 Vdc contact resistance insulation resistance at 500 Vdc voltage withstand for 1 minute Vac Vdc 1 2 A A 30 mΩ 1,000 Vac 4 kg 3.5 kg 100 MΩ insertion force withdrawl force 1 operating temperature 5 life 70 5,000 cui.com units °C cycles For more information, please visit the product page. CUI Inc │ SERIES: SD │ DESCRIPTION: STANDARD DIN CONNECTOR date 04/12/2012 │ page 2 of 5 MECHANICAL DRAWINGS units: mm[inches] TOLERANCE: ±0.1mm 2.0 0.079 15.8 0.622 MATERIAL PLATING contact pins (30~80) brass nickel contact pins (81, 130) brass silver shell steel nickel insulator (30~80, 130) PBT insulator (81) ABS boot EVA 50.6 1.992 0.2 9.0 0.354 6.5 0.256 0.15 1.5 0.059 (TYP) 0.9 0.035 13.1 0.516 0.15 SD-30 SD-40 SD-50 72° SD-60 SD-51 60° 90° SD-70 SD-80 0.9 60° 45° cui.com 45° For more information, please visit the product page. CUI Inc │ SERIES: SD │ DESCRIPTION: STANDARD DIN CONNECTOR date 04/12/2012 │ page 3 of 5 units: mm[inches] TOLERANCE: ±0.1mm SD-81 2.00 0.079 1.5 0.059 (8 PLCS) 6.5 0.256 0.3 59.0 2.323 1.0 8.3 0.327 16.0 0.630 0.3 41° 0.9 0.035 13.2 0.520 45° SD-130 13.2 0.52 15.9 0.63 0.78 0.03 0.02 (13 PLCS) 8.8 0.35 50.1 1.97 9.2 0.36 2.5 0.10 7.5 0.30 2.5 0.10 2.5 0.10 4.5 0.18 cui.com For more information, please visit the product page. CUI Inc │ SERIES: SD │ DESCRIPTION: STANDARD DIN CONNECTOR date 04/12/2012 │ page 4 of 5 MECHANICAL ASSEMBLY cover 1 1 2 metal shield 2 PIN DETAILS 3 housing 3 2 STEP 1 solder wires to housing (3), assemble metal shield pieces (2) onto housing (3) STEP 2 slide cover (1) over metal shield (2) 2 3 2 2 cui.com 1 For more information, please visit the product page. CUI Inc │ SERIES: SD │ DESCRIPTION: STANDARD DIN CONNECTOR date 04/12/2012 │ page 5 of 5 REVISION HISTORY rev. description date 1.0 initial release 02/23/2006 1.01 new template applied 02/15/2012 1.02 updated housings 04/12/2012 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.