MURF1005 THRU MURF1060 SUPER FAST RECOVERY SILICON RECTIFIER Reverse Voltage - 50 to 600 Volts Forward Current - 10.0 Ampere FEATURES ITO-220AC Glass Passivated Die Construction 4.5± 0.2 Super-Fast Switching Low Forward Voltage Drop Low Reverse Leakage Current High Surge Current Capability Plastic Material has UL Flammability Classification 94V-O 10.2± 0.2 2 Case: ITO-220AC, Full Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Weight: 2.24 grams (approx.) Mounting Position: Any Mounting Torque: 11.5 cm-kg (10 in-lbs) Max. 3.3± 0.1 ? 3.2± 0.2 PIN 4.0± 0.3 13.5± 0.5 MECHANICAL DATA 1 8.2± 0.2 . . 16.5± 0.3 15.2± 0.5 3.1+0.2 -0.1 2.6± 0.2 1.4± 0.1 0.6± 0.1 0.6± 0.1 5.0± 0.1 Dimensions in millimeters PIN 1 + PIN 3 - MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Symbol MURF 1005 MURF 1010 MURF 1015 MURF 1020 MURF 1030 MURF 1040 MURF 1060 Unit VRRM VRWM VR 50 100 150 200 300 400 600 V VR(RMS) 35 70 105 140 210 280 420 V Average Rectified Output Current @TC = 105°C IO 10.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 150 A Forward Voltage VFM @IF = 10.0A Peak Reverse Current @TA = 25°C At Rated DC Blocking Voltage @TA = 125°C 0.95 1.3 1.7 10 500 IRM V µA Reverse Recovery Time (Note 1) trr 35 50 nS Typical Junction Capacitance (Note 2) Cj 70 50 pF Operating and Storage Temperature Range Tj, TSTG Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. -65 to +150 °C MURF1005 THRU MURF1060 RATINGS AND CHARACTERISTIC CURVES IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FORWARD CURRENT (A) 10 8 6 4 2 0 0 50 100 100 1005 - 1020 Pulse width = 300 µs 2% duty cycle 0.1 150 0.2 0.6 1.0 1.4 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 400 8.3 ms single half-sine-wave JEDEC method 150 1005 - 1020 Cj, CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 1060 1.0 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 180 1030 - 1040 10 120 90 60 100 10030 - 1060 30 0 10 1 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Max Non-Repetitive Surge Current 100 0.1 1.0 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance 100