AC Voltage Sensor HARTMAN Aerospace Power Products Features: • 3PDT Main Contacts • Drop-Out Time Delay • 115 VAC • 10 Amps • High Reliability • Meets many requirements of MIL-R-6106 • Light Weight Construction E-308AH 3PDT, 10 Amps, 115 VAC CONTACTOR CONFIGURATION Dimensions for this product are expressed in inches. Multiply values by 25.4 for millimeters. PRODUCT SPECIFICATIONS Electrical: Contact Form Contact Rating (Amps/Pole at 115 VAC & 28 VDC) Load Transfer Contact Life Contact Bounce Duty Cycle Nominal Operating Voltage Maximum Operating Voltage Operating Frequency Pick-Up Voltage Pick-Up Time Drop-Out Voltage Drop-Out Time Delay Input Voltage Transients Operating Current Dielectric Withstanding Voltage Insulation Resistance Environmental: Ambient Temperature Vibration Shock Acceleration Altitude Mechanical: Weight Construction Catalog (web doc only) Revised 5-04 www.tycoelectronics.com 3PDT Resistive Inductive Motor Lamp 20 15 5 4 10 Amps Inductive MIL-R-6106 .7 P.F. Lagging, 10,000 Operations Minimum 50,000 Operations, Minimum at Rated Resistive Load 3 Milliseconds Maximum Continuous 115 VAC, RMS L-N 122 VAC, RMS L-N 400 ±20 Hz 109 ±2 VRMS 75 Milliseconds Max. 104 ±2 VRMS When the relay is in the energized position and the voltage drops below 104 ±2 VRMS and above 88 ±4 VRMS the relay shall remain energized for 200 - 400 milliseconds. When the voltage drops below 88 ±4 and above 8 ±1 VRMS, the relay shall remain energized for 50-400- milliseconds. Below 8 ±1 VRMS the relay shall de-energize in 400 milliseconds max. Per MIL-STD-704A 200 Milliamps Maximum at 25°C 1000 VRMS, 60 Hz, 1 MIL / AMP Maximum Leakage 1000 MegOhms Minimum at 500 VDC at 20°C and 50% RH (Max.) -55°C to +85°C (Operating) -55°C to +125°C (Non-Operating) .060 DA 5 to 80 Hz, 20 G'S 80 to 2000 Hz 30 G'S, 11 Milliseconds, 1/2 SINE, 3 Axes 20 G'S in Any Axis 0 to 50,000 Feet 18 Oz. Gasket Seal (Vented), Hermetic Sealed Contacts, Aluminum Cover and Mounting Flanges Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. Notes: For factory-direct application assistance, contact the HARTMAN product team at (419) 521-9500, Fax (419) 526-2749. © 2004 by Tyco Electronics Corporation. All Rights Reserved. HARTMAN and TYCO are trademarks. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967