9U 14-slot CompactPCI Chassis with Redundant Power Supplies Rear View Front View I INDUSTRIAL PC CO M P U TERS 2.1 / 2.5 / 2.7 2.9/ 2.11 Features Standard 6U CompactPCI and PICMG 2.5 H.110 CT Bus for all peripheral slots PICMG 2.1 Hot Swap compliant 32-bit CompactPCI backplane with P3 & P5 rear I/O One cPCI segment, 1 system slot and 13 peripheral slots 1 Fan Tray for ventilation 2 Internal Blowers for ventilation 3+1 (750W + 250W) hot swappable redundant power supplies with Universal AC input Redundant cooling architecture Magnetic circuit breaker protection for AC-input 5.25” Drive Bay x 2 Power Switch LED indicator Reset Switch 5 Fan Trays for intake 250W CompactPCI PSU x 4 3-7 PCI Bus1 PCI Bus2 System Slot Utility Board Slot 9U 14-slot CompactPCI Chassis with Redundant Power Supplies Specifications Enclosure Recommended Configurations EIA RS-310C 19” 9U high rackmount enclosure Coated metal plate outer covering CPU Board (System slot) Rear I/O Board cPCI-6760D/P8 cPCI-R6760D, cPCI-R6760S Guarded power switch and reset button Form Factor 6U CompactPCI CompactPCI 2.0 R3.0, 2.1 R2.0, 2.5 R1.0, 2.7 R1.0, 2.9 R1.0, 2.11 R1.0 Standards Backplane cPCI Bus 32-bit/33MHz 250W Universal AC Input PSU x 4 System Slot 1 (right-hand side) Peripheral Slot 13 (Bus A: 7 slots, Bus B: 6 slots) H.110 CT Bus Comply with all peripheral slots Rear I/O All slots support P3, P4, P5 rear I/O with AB-type shroud V (I/O) 3.3V or 5V (default) selectable Power Input ATX connector x 4, DC screw terminals System slot Legacy I/O FDD, IDE1 and IDE2 (pin compatible with cPCI-6760D) Power Supply 9U CompactPCI Sub-system with 32-bit 14-slot H.110 BP, Note: All models above do not include any boards. AdvancedTCA Products 2 Ordering Information cPCIS-3310/AC cBP-6014R 1 6U cPCI SBC 3 6U cPCI Platforms 4 3U cPCI SBC Supports current sharing on 5V, 3.3V and 12V PICMG 2.11 47-pin power interface Available power module: cPS-H325/AC x 4 Max. Load Min. Load +5V 132.0A 6.0A +3.3V 132.0A N/A +12V 22.0A N/A -12V 4.0A N/A ** Max. load is the continuous operating load of each rail individually. The Max. load of each rail cannot be drawn from all outputs simultaneously. 5 3U cPCI Platforms 6 SBC & IMB Basic Alarm Module LED indications show power voltage status on 5V, 3.3V, 12V, and -12V, fan, temperature Abnormal status will generate alarm and LED warning Alarm reset Industrial Chassis Drive Bay Two 5.25” drive bay Cooling System 2 top blowers Rated speed for each fan: 3300RPM for ventilation Rated power for each fan: 4.56W 1 top fan Rated speed for each fan: 4000 ± 500RPM for ventilation Rated power for each fan: 2.64W 5 fans for Rated speed for each fan: 4000 ± 500RPM front-access intake Rated power for each fan: 2.64W Physical 7 Dimensions 483.2 x 399 x 299.1 (mm, W x H x D, w/o handle) Weight 24.5kg/53.9lbs (including redundant power supply and backplane only) Operating Temp. 0 to 55˚C (depending on system configurations) Storage Temp. -20 to 80˚C Humidity 5% to 95%, non-condensed Shock 15G peak-to-peak, 11ms duration, non-operation Vibration Non-operation: 1.88Grms, 5-500Hz, each axis Operation: 0.5Grms, 5-500Hz, each axis, tested with 2.5" HDD 8 ETX & Embedded Modules 9 Network Appliance 10 IPC Accessories www.adlinktech.com 3-8