ADVANTECH MIC-3001

MIC-3001
4U CompactPCI Enclosure
with 8 slot 3U Backplane
Features
 8-slot 3U CompactPCI®
 Easy installation: rackmount or panelmount
 Hot swap compliant backplane
 Hot swap fan tray module
 Optional fault detection and alarm notification
 Logic Ground and Chassis Ground can be isolated or common
Introduction
The MIC-3001/8 is a 4U-size enclosure with eight 3U CompactPCI slots for rack or panel mounting. Its flexible modular design allows users to configure for a variety of applications.
Reserved space in Device Bay can be used to install peripherals such as 3.5" HDD, or a CD-ROM drive.
The 3U size 8-slot backplane of the MIC-3001 series supports 32-bit operation. The backplane complies with the PICMG 2.1 Hot-Swap Specification, and you can build easy-tomaintain systems with hot-swappable CompactPCI boards and software.
A 1U-high fan module provides forced cooling air into the system. Two 113-CFM high-speed fans are mounted in a hot-swap tray directly underneath the card slots. The fan's
tachometer output enables the alarm module to monitor the speed of the fans, and a protective circuit has been designed into the fan backplane to reduce spikes and noise during
hot-swapping. This design allows replacement of fans without turning the system off.
Specifications
Physical
Backplane
 Slots
 Bus
 Vio Voltage
8
32-bit/33 MHz
3.3 V/5 V (short-bar selectable)
Model
Dimensions
(W x H x D)
Weight
Device Bay
 HDD or CD-ROM
Model
MIC-3001
440 x 178 x 240 mm
440 x 178 x 283 mm
7 Kg (15.4lb)
10 kg (22 lb)
 Operating Vibration
2 (2 x 113 CFM)
 Shock
90 ~ 132 VAC/180 ~ 264 VAC @ 47 ~ 63 Hz.
400 W
 MTBF (hours)
+3.3 V
20
0.2
+5 V
42
2.5
-5 V
1
0
+12 V
14
0.5
-12 V
1
0
+5 Vsb
0.75
0
PICMG 2.0, R 2.1CompactPCI Specification
PICMG 2.1, R 1.0 Hot Swap Specification
Ordering Information
Environment
 MIC-3001/8
 Operating Temperature 0 ~ 50° C (32 ~ 122° F)
 Storing Temperature -40 ~ 80° C (-40 ~ 176° F)
 Storing Humidity
10 ~ 90% @ 40° C, non-condensing
 MIC-3001AR/8
 9663300100
 9663300101
CompactPCI Systems
71174 hours
Compliance
 PICMG Compliance
Load
Max.
Min.
1.0 Grms w/CF disk
0.5 Grms w/3.5" HDD
10 G peak-to peak, 11ms duration
Reliability
Power
 Input
 Output
 Loading (A)
MIC-3001AR/8
Yes
Cooling
 Fan
MIC-3001/8
4U CompactPCI chassis with 8-slot backplane, fan tray
module, and AC ATX power supply
4U CompactPCI chassis with 8-slot backplane, fan tray
module, rear I/O and AC ATX power supply
3.5" FDD/HDD bracket accessory for MIC-3000
chassis
3U-4TE Blank Cover accessory for MIC-3000 chassis
MIC-3001 Series
Dimensions
Front View of MIC-3001/8 and MIC-3001AR/8
I/O Slot System Slot
Fan Tray
Rear View of MIC-3001AR/8
Power On/Off Switch
Device Bay
ATX Power Supply
Rear I/O Module
Online Download www.advantech.com/products