Digital I/O PCI-7296/7248/7224, PCIe-7296/7248 96/48/24-CH Opto-22 Compatible DIO Cards Introduction ADLINK's PCI-7296/7248/7224 and PCIe-7248/7296 are high-density parallel digital I/O boards with 96/48/24 I/O channels. The header connectors are fully compatible with industry Opto-22 standard. Thus, PCI-7296/7248/7224 and PCIe-7248/7296 can utilize the Opto-22 external devices. The PCI-7296/7248/7224 and PCIe-7248/7296 devices PCI-7224 emulate mode 0 of the industry standard 8255 programmable peripheral interface (PPI) chips. The PCI-7296/7248/7224 and PCIe-7248/7296 provides 4/2/1 PPI chips respectively. Each PPI offers three 8-bit ports: Port A, Port B and Port C. The Port C is divided into 2 nibble-wide (4-bit) ports. The PCI-7296/7248/7224 and PCIe-7248/7296 devices have programmable timer/counters. One 16-bit counter is available for event counting, while the other 32-bit timer is available for timed interrupt generation. PCI-7296 The PCI-7296/7248/7224 and PCIe-7248/7296 devices provide multiple programmable interrupt sources from DIO channels, as well as the output of the timer. PCI-7248 Specifications Ordering Information Digital I/O ■PCI-7296 96-CH Opto-22 Compatible DIO Card ■ Number of channels • 96 inputs/outputs (PCI/PCIe-7296) • 48 inputs/outputs (PCI/PCIe-7248) • 24 inputs/outputs (PCI-7224) ■ Compatibility: 5 V/TTL ■ Digital logic levels • Input high voltage: 2-5.25 V • Input low voltage: 0-0.8 V • Output high voltage: 2.4 V minimum • Output low voltage: 0.5 V maximum ■ Output driving capacity • Source current: 2.6 mA for port A & B, and 15 mA for port C. • Sink current: 24 mA ■ Data transfers: programmed I/O PCIe-7296 PCIe-7248 Features ■ Supports a 32-bit 5 V PCI bus (PCI-7224/7248/7296) General Specifications ■ x1 PCI Express® interface (PCIe-7248/7296) ■ 96-CH digital TTL/DTL inputs/outputs (PCI/PCIe-7296) ■ 48-CH digital TTL/DTL inputs/outputs (PCI/PCIe-7248) ■ 24-CH digital TTL/DTL inputs/outputs (PCI-7224) ■ Emulates 4/2/1 industry standard 8255 PPI (mode 0) ■ Direct interface with OPTO-22 compatible I/O modules ■ Output status read back ■ I/O connector • 50-pin ribbon male x 1 (PCI-7224) • 50-pin ribbon male x 2 (PCI/PCIe-7248) • 50-pin ribbon male x 4 (PCI/PCIe-7296) ■ Operating temperature: 0ºC to 60ºC ■ Storage temperature: -20ºC to 80ºC ■ Relative humidity: 5% to 95%, non-condensing ■ Power requirements ■ Onboard 8254 timer/counter chip ■ One 32-bit timer for timed interrupt generation ■ ■ ■ +12 V and +5 V power available on OPTO-22 connectors ■ Onboard resettable fuses for power output protection ■ Compact, half-size PCB Device Power Consumption One 16-bit event counter to generate event interrupt PCI-7296 PCI-7248 PCI-7224 Programmable interrupt sources PCIe-7248 860 mA @ 5 VDC Typical 500 mA @ 5 VDC Typical 330 mA @ 5 VDC Typical 350 mA @ 12 VDC Typical 280 mA @ 3.3 VDC Typical 590 mA @ 12 VDC Typical 280 mA @ 3.3 VDC Typical ■Operating Systems • Windows Vista/XP/2000/2003 • Linux ■Recommended Software • AD-Logger • VB.NET/VC.NET/VB/VC++/BCB/Delphi • DAQBench ■Driver Support • DAQPilot for LabVIEW™ • DAQ-MTLB for MATLAB® • PCIS-DASK for Windows • PCIS-DASK/X for Linux 2-55 www.adlinktech.com PCIe-7296 ■ Dimensions (not including connectors) • 148 mm x 102 mm (PCI-7248 and PCI-7224) • 166 mm x 102 mm (PCI-7296) • 168 mm x 112 mm (PCIe-7248/7296) Terminal Boards ■TB-24R-01* Terminal Board with 24-CH Relay Outputs ■TB-24P-01* Terminal Board with 24-CH Isolated Digital Inputs ■TB-16P8R-01* Terminal Board with 16-CH Isolated DI & 8-CH Relay Outputs ■DIN-24R-01* Terminal Board with 24-CH Relay Outputs ■DIN-24P-01* Terminal Board with 24-CH Isolated Digital Inputs and DIN-Rail Mounting ■PCI-7248 48-CH Opto-22 Compatible DIO Card ■PCI-7224 24-CH Opto-22 Compatible DIO Card ■PCIe-7248 48-CH Opto-22 Compliant PCIe DIO Card ■PCIe-7296 96-CH Opto-22 Compliant PCIe DIO Card Note: The PCI-7224 is the 24-CH version of the PCI-7248. The software drivers of the PCI-7224 are exactly the same as those of the PCI-7248 Pin Assignment PCI-7224/7248/7296 & PCIe-7248/7296 PnC7 PnC6 PnC5 PnC4 PnC3 PnC2 PnC1 PnC0 PnB7 PnB6 PnB5 PnB4 PnB3 PnB2 PnB1 PnB0 PnA7 PnA6 PnA5 PnA4 PnA3 PnA2 PnA1 PnA0 +5Vout 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 +12Vout/GND (User Selection) +12Vout/GND (User Selection) GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND * Cables are not included. For more information about mating cables, please refer to P2-61/62. Updated 03-28, 2012. ©2012 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice.