ATC 900 C Series X7R Ceramic RF Power Multilayer Capacitors • Case C Size (.250" x .250") • Capacitance Range 0.01 µF to 1 µF • Low ESR/ESL • Mid-K • Rugged Construction • High Reliability • Available with Encapsulation Option* ATC, the industry leader, offers new improved ESR/ESL performance for the 900 C Series RF Capacitors. This Series exhibits superior volumetric efficiency, providing high levels of capacitance for HF/ RF power applications. Ceramic construction provides a rugged, hermetic package. ELECTRICAL AND MECHANICAL SPECIFICATIONS ATC offers an encapsulation option for applications requiring extended protection against arc-over and corona. Less than ±15% (-55°C to +125°C) Typical functional applications: Bypass, Coupling and DC Blocking. 0.01 MFd to 1 MFd 1000 megohms min. @ +25°C at rated WVDC. 100 megohms min. @ +125°C at rated WVDC. Typical circuit applications: HF/RF Power Amplifiers, High Frequency Switch Mode Power Supplies, and Medical Electronics. *For leaded styles only. ENVIRONMENTAL TESTS DISSIPATION FACTOR (DF): 2.5% max. at 1 KHz. TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC): INSULATION RESISTANCE (IR): WORKING VOLTAGE (WVDC): See Capacitance Values Table, page 2. DIELECTRIC WITHSTANDING VOLTAGE (DWV): Case C: 250% of rated WVDC for 5 secs. ATC 900 C Series Capacitors are designed and manufactured to meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123. AGING EFFECTS: 3% maximum per decade hour. THERMAL SHOCK: DIELECTRIC ABSORPTION: 2% typical MIL-STD-202, Method 107, Condition A. MOISTURE RESISTANCE: MIL-STD-202, Method 106. LOW VOLTAGE HUMIDITY: MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied while subjected to an environment of 85°C with 85% relative humidity for 240 hours min. LIFE TEST: MIL-STD-202, Method 108, for 2000 hours, at 125°C. 200% WVDC applied. PIEZOELECTRIC EFFECTS: Negligible OPERATING TEMPERATURE RANGE: -55°C to +125°C (No derating of working voltage). TERMINATION STYLES: Available in various surface mount and leaded styles. See Mechanical Configurations, page 3. TERMINAL STRENGTH: Terminations for chips and pellets withstand a pull of 10 lbs. min., 15 lbs. typical, for 5 seconds in direction perpendicular to the termina-tion surface of the capacitor. Test per MIL-STD-202, method 211. ATC # 001-815 Rev. K 2/09 ATC 900 C Capacitance Values CAP. CODE CAP. (MFd) TOL. RATED WVDC 103 153 223 .010 .015 .022 300 300 300 333 473 683 .033 .047 .068 250 250 250 104 154 224 .10 .15 .22 334 474 684 .33 .47 .68 150 150 150 824 105 .82 1.0 100 100 200 200 200 K, M, N VRMS = 0.707 X WVDC • SPECIAL VALUES, TOLERANCES, HIGHER WVDC AND MATCHING AVAILABLE. • ENCAPSULATION OPTION AVAILABLE. PLEASE CONSULT FACTORY. CAPACITANCE TOLERANCE Code K M N Tol. ±10% ±20% ±30% ATC PART NUMBER CODE ATC900 C 10 5 M W 100 X C Packaging C - ATC Matrix Tray (Standard) T - Tape and Reel, 500 pc. qty. I - Special Packaging. Consult Factory Series Case Size Capacitance Code: First 2 significant digits for capacitance. Laser Marking (Optional) Indicates number of zeros following digits of capacitance in picofarads except for decimal values. WVDC Capacitance Tolerance Termination Code The above part number refers to a 900 C Series (case size C) 1.0 MFd capacitor, M tolerance (±20%), 100 WVDC, with W termination (Tin /Lead, Solder Plated over Nickel Barrier), laser marking and Waffle-packaging. ATC accepts orders for our parts using designations with or without the “ATC” prefix. Both methods of defining the part number are equivalent, i.e., part numbers referenced with the “ATC” prefix are interchangeable to parts referenced without the “ATC” prefix. Customers are free to use either in specifying or procuring parts from American Technical Ceramics. A M E R I C A N 2 ATC North America [email protected] For additional information and catalogs contact your ATC representative or call direct at (+1-631) 622-4700. Consult factory for additional performance data. T E C H N I C A L C E R A M I C S ATC Europe [email protected] ATC Asia [email protected] www.at c er am ic s .c om ATC 900 C Capacitors: Mechanical Configurations ATC SERIES & CASE SIZE ATC TERM. CODE CASE SIZE & TYPE W/T IS A TERMINATION SURFACE Y 900C W W L C Solder Plate Y 900C P Y 900C T C Solderable Nickel Barrier MS Microstrip 900C AR Axial Ribbon WL .040 (1.02) max. .230 +.020 -.010 (5.84 +0.51 -0.25) W T W L AW T Axial Wire L .145 (3.68) max. for capacitance values < 0.82 MFd; High Purity Silver Leads LL = .500 (12.7) min. WL = .240 ±.005 (6.10 ±.127) TL = .004 ±.001 (.102 ±.025) Leads are Attached with High Temperature Solder. .165 (4.19) max. for capacitance values ≥ 0.82 MFd. VA C Veritical Axial Ribbon .245 ±.025 (6.22 ±0.64) T LL 900C • W C WL W L TL T LL 900C RW T C Radial Wire L Heavy Tin / Lead Coated, over Nickel Barrier Termination Tin Plated over Nickel Barrier Termination LL 900C MATERIALS RoHS Compliant .250 ±.015 (6.35 ±0.38) TL LL C OVERLAP (Y) Tin /Lead, Solder Plated over Nickel Barrier Termination TL L THICKNESS (T) .230 +.025 -.010 (5.84 +0.64 -0.25) T LL WL WIDTH (W) LEAD AND TERMINATION DIMENSIONS AND MATERIALS .230 +.020 -.010 (5.84 +0.51 -0.25) T W L LENGTH (L) T W L C Pellet 900C BODY DIMENSIONS INCHES (mm) OUTLINES W N/A Silver-plated Copper Leads LL = 1.0 (25.4) min. Dia. = .032 ±.002 (0.81 ±0.05) Silver Leads LL = .500 (12.7) min. WL = * See below TL = .004 ±.001 (.102 ±.025) Silver-plated Copper Leads LL = 1.0 (25.4) min. Dia. = .032 ±.002 (0.81 ±0.05) Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant. **WL = .110 (2.79) for capacitance values < 0.82 MFd.; WL = .130 (3.30) for capacitance values ≥ 0.82 MFd. A M E R I C A N 3 ATC North America [email protected] T E C H N I C A L C E R A M I C S ATC Europe [email protected] ATC Asia [email protected] www.at c er am ic s .c om ATC 900 C Capacitors: Non-Magnetic Mechanical Configurations ATC SERIES & CASE SIZE CASE SIZE & TYPE W/T IS A TERMINATION SURFACE Y 900C C Non-Mag Solder Plate WN W L Y 900C TN BODY DIMENSIONS INCHES (mm) OUTLINES ATC TERM. CODE C Non-Mag Solderable Barrier W L T T LENGTH (L) WIDTH (W) .230 +.025 -.010 (5.84 +0.64 -0.25) .230 +.025 -.010 (5.84 +0.64 -0.25) LEAD AND TERMINATION DIMENSIONS AND MATERIALS THICKNESS (T) .145 (3.68) max. < 0.82 MFd .250 ±.015 (6.35 ±0.38) .165 (4.19) max. OVERLAP (Y) MATERIALS Tin /Lead, Solder Plated over Non-Magnetic Barrier Termination .040 (1.02) max. RoHS Compliant Tin Plated over Non-Magnetic Barrier Termination ≥ 0.82 MFd Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant. Suggested Mounting Pad Dimensions Case C Vertical Mount T L Cap Value W L W 105M 5M 10 T < .82 mF $ .82 mF Horizontal Electrode Orientation Vertical Electrode Orientation B A Min. B Min. C Min. D Min. Normal .150 .050 .200 .300 High Density .130 .030 .200 .260 Normal .185 .050 .200 .300 High Density .165 .030 .200 .260 .200 .300 .200 .260 Pad Size B Horizontal Mount A C All values Normal .280 .050 High Density .260 .030 D A M E R I C A N 4 ATC North America [email protected] Dimensions are in inches. T E C H N I C A L C E R A M I C S ATC Europe [email protected] ATC Asia [email protected] www.a tcer am ic s .c om ATC 900 C Performance Data ESR VS. CAPACITANCE ATC SERIES 900, CASE C Q VS. CAPACITANCE ATC SERIES 900, CASE C 0.1 100 ESR (Ohms) 10 Q 30 MHz 30 MHz 1 (Typical) (Typical) 0.01 0.01 0.1 0.1 1 0.01 0.1 C CAPACITANCE(µF) SERIES RESONANCE VS. CAPACITANCE ATC SERIES 900, CASE C CURRENT RATING VS. CAPACITANCE ATC SERIES 900, CASE C 100 RMS CURRENT (Amps) FREQUENCY (MHz) 100 10 The current rating is based on a 65°C mounting surface and a device thermal resistance of 15°C/W. A power dissipation of 4 W will result in a case temperature of 125°C. 30 MHz 10 Dotted line = Power dissipation limited (Typical) 1 0.01 0.1 1 1 0.01 C CAPACITANCE (µF) A M E R I C A N ATC North America [email protected] 5 1 C CAPACITANCE (µF) 0.1 CAPACITANCE (µF) C T E C H N I C A L C E R A M I C S ATC Europe [email protected] ATC Asia [email protected] w w w.at c er am ic s .c om 1 Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992 Rev. B; 12/05). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice. © 1996 American Technical Ceramics Corp. All Rights Reserved. ATC # 001-815 Rev. K 2/09