ETC ATC700B331JW500XT

ATC 700 B Series NPO
Porcelain and Ceramic
Multilayer Capacitors
• Case B Size
(.110" x .110")
• Capacitance Range
0.1 pF to 5100 pF
• Low ESR/ESL
• Zero TCC
• Low Noise
• High Self-Resonance
• Rugged Construction • Established Reliability (QPL)
• Extended WVDC up to 1500 VDC
ATC, the industry leader, is announcing new improved ESR/ESL
performance for the 700 B Series RF/Microwave Capacitors. The
superior high self-resonance and zero TCC characteristic of this Series
provide excellent performance over a broad range of RF and microwave
applications requiring minimum drift, including RF power. Porcelain
and ceramic construction provide a rugged, hermetic package.
ELECTRICAL AND MECHANICAL
SPECIFICATIONS
QUALITY FACTOR (Q):
Greater than 10,000 (0.1 pF to 200 pF) @ 1 MHz.
Greater than 2000 (220 pF to 1000 pF) @ 1 MHz.
Greater than 2000 (1100 pF to 5100 pF) @ 1 KHz.
TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC):
0 ±30 PPM/°C (-55°C to +125°C)
INSULATION RESISTANCE (IR):
0.1 pF to 470 pF:
106 Megohms min. @ +25°C at rated WVDC.
5 Megohms min. @ +125°C at rated WVDC.
10
Typical functional applications: Bypass, Coupling, Tuning and DC Blocking.
510 pF to 5100 pF:
Typical circuit applications: Filters, Oscillators, Timing and RF Power
105 Megohms min. @ +25°C at rated WVDC.
Amplifiers.
104 Megohms min. @ +125°C at rated WVDC.
WORKING VOLTAGE (WVDC): See Capacitance Values Table, page 2.
ENVIRONMENTAL TESTS
DIELECTRIC WITHSTANDING VOLTAGE (DWV):
ATC 700 B Series Capacitors are designed and manufactured to meet and
exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123.
250% of WVDC for capacitors rated at 500 volts DC or less for 5 seconds.
150% of WVDC for capacitors rated at 1250 volts DC or less for 5 seconds.
120% of WVDC for capacitors rated above 1250 volts DC for 5 seconds.
THERMAL SHOCK:
MIL-STD-202, Method 107, Condition A.
MOISTURE RESISTANCE:
RETRACE: Less than ±(0.02% or 0.02 pF), whichever is greater.
MIL-STD-202, Method 106.
AGING EFFECTS: None
LOW VOLTAGE HUMIDITY:
PIEZOELECTRIC EFFECTS: None
(No capacitance variation with voltage or pressure).
MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied
while subjected to an environment of 85°C with 85% relative humidity for 240 hours min.
LIFE TEST:
MIL-STD-202, Method 108, for 2000 hours, at 125°C.
200% WVDC applied.
Voltage Applied:
200% of WVDC for capacitors rated at 500 volts DC or less.
120% of WVDC for capacitors rated at 1250 volts DC or less.
100% of WVDC for capacitors rated above 1250 volts DC.
CAPACITANCE DRIFT: ±(0.02% or 0.02 pF), whichever is greater.
OPERATING TEMPERATURE RANGE:
0.1 to 200 pF: from -55°C to +175°C
220 to 5100 pF: from -55°C to +125°C
TERMINATION STYLES:
Available in various surface mount and leaded styles.
See Mechanical Configurations, page 3.
TERMINAL STRENGTH: Terminations for chips and pellets withstand a pull
of 5 lbs. min., 15 lbs. typical, for 5 seconds in direction perpendicular to the
termination surface of the capacitor. Test per MIL-STD-202, method 211.
ATC # 001-814 Rev.R, 8/13
ATC 700 B Capacitance Values
1500
VOLT
33
36
39
43
47
51
500
56
62
68
75
82
91
F, G, J
100
110 K, M
120
130
300
150
160
180
200
220
240
200
270
300
1500
EXT
330
360
390
430
470
510
560
620
680
750
820
910
101
111
121
131
151
161
181
201
221
241
271
301
RATED WVDC CAP. CAP.
STD.
EXT. CODE (pF)
VOLTAGE
3.3
3.6
3.9
4.3
4.7 B, C, D
5.1
5.6
6.2
6.8
7.5 B, C, J
8.2 K, M
9.1
10
500
11
12
13
15
16 F, G, J,
K, M
18
20
22
24
27
30
TOL.
1000
EXTENDED
1500
RATED WVDC CAP. CAP.
STD.
EXT. CODE (pF)
EXTENDED VOLTAGE
3R3
3R6
3R9
4R3
4R7
5R1
5R6
6R2
6R8
7R5
8R2
9R1
100
110
120
130
150
160
180
200
220
240
270
300
EXTENDED VOLTAGE
0.1
B
0.2
0.3 B, C
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3 B, C, D 500
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.4
2.7
3.0
EXTENDED VOLTAGE
0R1
0R2
0R3
0R4
0R5
0R6
0R7
0R8
0R9
1R0
1R1
1R2
1R3
1R4
1R5
1R6
1R7
1R8
1R9
2R0
2R1
2R2
2R4
2R7
3R0
TOL.
EXTENDED VOLTAGE
RATED WVDC CAP. CAP.
CAP. CAP.
TOL.
CODE (pF)
STD.
EXT. CODE (pF)
N/A
331
361
391
431
471
511
561
621
681
751
821
911
102
112
122
152
182
222
272
302
332
392
472
512
TOL.
RATED WVDC
STD.
330
360
390
200
430
470
510
100
560
620
680
750
820
910
F, G, J
1000
1100 K, M
1200
1500
1800
2200
50
2700
3000
3300
3900
4700
5100
EXT.
N/A
VRMS = 0.707 x WVDC
• SPECIAL VALUES, TOLERANCES, HIGHER WVDC AND MATCHING AVAILABLE. • ENCAPSULATION OPTION AVAILABLE. PLEASE CONSULT FACTORY.
Capacitance values in bold type indicate porcelain dielectric. All other capacitance values indicate ceramic dielectric.
All 700 B Capacitors are available laser marked with ATC's identification, capacitance code and tolerance.
NOTE: EXTENDED WVDC DOES NOT APPLY TO CDR PRODUCTS.
ATC PART NUMBER CODE
ATC700 B 33 1 J W 500 X
T
Series
Packaging
T - Tape and Reel, 1000 pc. qty.*
TV - Vertical Orientation of Product,
Tape and Reel, 1000 pc. qty.*
I - Special Packaging. Consult Factory.
*Consult ATC for other quantities
Case Size
Capacitance Code:
First 2 significant digits for capacitance.
R=Decimal Point
Indicates number of zeros following digits
of capacitance in picofarads except for decimal values.
ATC Cap-Pac® packaging (100 pc. qty. std.) is also
available. For this option, leave last field blank.
Capacitance Tolerance
Laser Marking
CAPACITANCE TOLERANCE
Code
B
Tol.
±0.1 pF
C
D
±0.25 pF ±0.5 pF
F
G
±1%
±2%
J
K
WVDC
Termination Code
M
±5% ±10% ±20%
The above part number refers to a 700 B Series (case size B) 330 pF capacitor,
J tolerance (±5%), 500 WVDC, with W termination (Tin/Lead, Solder Plated over Nickel Barrier), laser marking and ATC Cap-Pac® packaging.
ATC accepts orders for our parts using designations with or without the
“ATC” prefix. Both methods of defining the part number are equivalent,
i.e., part numbers referenced with the “ATC” prefix are interchangeable to
parts referenced without the “ATC” prefix. Customers are free to use either
in specifying or procuring parts from American Technical Ceramics.
A M E R I C A N
2
ATC North America
[email protected]
For additional information and catalogs contact your ATC
representative or call direct at (+1-631) 622-4700.
Consult factory for additional performance data.
T E C H N I C A L
C E R A M I C S
ATC Europe
[email protected]
ATC Asia
[email protected]
www.at c er am ic s .c om
ATC 700 B Capacitors: Mechanical Configurations
ATC
SERIES
& CASE
SIZE
ATC
TERM.
CODE
BODY DIMENSIONS
INCHES (mm)
OUTLINES
MIL-PRF55681
CASE SIZE
& TYPE
W/T IS A
TERMINATION SURFACE
W
CDR14BP
L
P
CDR14BP
Pellet
L
T
Heavy Tin / Lead Coated,
over Nickel Barrier
Termination
T
.110
+.020 -.010 .110 ±.015
(2.79
(2.79 ±0.38)
+0.51 -0.25)
T
.110
+.020 -.010 .110 ±.015
(2.79
(2.79 ±0.38)
+0.51 -0.25)
Y
700B
T
N/A
B
W
Solderable
Nickel Barrier
L
Y
700B
700B
CA
MS
CDR13BP
CDR21BP
W
B
Gold Chip
B
L
WL
700B
AR
CDR22BP
B
WL
RR
CDR24BP
B
Radial Ribbon
W
L
W
L
RoHS Compliant
Tin Plated over
Nickel Barrier Termination
RoHS Compliant
Gold Plated over
Nickel Barrier Termination
.120 (3.05)
max.
T
Length
( LL )
Width Thickness
( WL )
( TL )
.250
(6.35)
min.
.093
±.005
(2.36
±0.13)
.500
(12.7)
min.
#26 AWG.,
.016 (.406) dia.
nominal
TL
LL
Axial Ribbon
700B
W
L
Microstrip
.102 (2.59) .015 (0.38)
max.
±.010 (0.25)
TL
LL
MATERIALS
.110
+.035 -.010 .110 ±.015
(2.79
(2.79 ±0.38)
+0.89 -0.25)
W
B
OVERLAP
(Y)
T
Y
700B
THICKNESS
(T)
Tin / Lead, Solder Plated over
Nickel Barrier Termination
W
B
Solder Plate
WIDTH
(W)
.110
+.020 -.010 .110 ±.015
(2.79
(2.79 ±0.38)
+0.51 -0.25)
Y
700B
LENGTH
(L)
LEAD AND TERMINATION
DIMENSIONS AND MATERIALS
.135 ±.015
(3.43 ±0.38)
T
LL
.110 ±.015
(2.79 ±0.38
WL
T
.004
±.001
(.102
±.025)
N/A
.102 (2.59)
max.
LL
700B
RW
CDR23BP
B
Radial Wire
T
L
W
.145 ±.020
(3.68 ±0.51)
LL
700B
AW
CDR25BP
B
Axial Wire
W
L
•
T
Additional lead styles available: Narrow Microstrip (NM), Narrow Axial Ribbon (NA) and Vertical Narrow Microstrip (H). Other lead lengths are available; consult factory.
All leads are high purity silver attached with high temperature solder and are RoHS compliant. For a complete military catalog, request American Technical Ceramics
document ATC 001-818.
A M E R I C A N
ATC North America
[email protected]
T E C H N I C A L
C E R A M I C S
ATC Europe
[email protected]
ATC Asia
[email protected]
www.at c er am ic s .c om
3
ATC 700 B Capacitors: Non-Magnetic Mechanical Configurations
ATC
SERIES
& CASE
SIZE
700B
700B
700B
700B
700B
700B
700B
700B
MIL-PRF55681
WN
Meets
Requirements
PN
TN
MN
AN
FN
RN
BN
BODY DIMENSIONS
INCHES (mm)
OUTLINES
ATC
TERM.
CODE
CASE SIZE
& TYPE
B
Non-Mag
Solder Plate
Meets
Requirements
Meets
Requirements
Meets
Requirements
Meets
Requirements
Meets
Requirements
T
W
Solderable
Barrier
B
Non-Mag
Microstrip
L
WL
Non-Mag
Axial Ribbon
B
Non-Mag
Radial Ribbon
W
L
B
W
L
W
L
RoHS Compliant
Tin Plated over
Non-Magnetic Barrier
Termination
.120 (3.05)
max.
T
Length
( LL )
Width Thickness
( WL )
( TL )
.250
(6.35)
min.
.093
±.005
(2.36
±0.13)
.500
(12.7)
min.
#26 AWG.,
.016 (.406) dia.
nominal
TL
LL
WL
Tin / Lead, Solder Plated over
Non-Magnetic Barrier
Termination
TL
LL
MATERIALS
.110
+.025 -.010 .110 ±.015
(2.79
(2.79 ±0.38)
+0.64 -0.25)
Y
B
Non-Mag
OVERLAP
(Y)
T
W
L
THICKNESS
(T)
.110
Heavy Tin / Lead Coated, over
+.035 -.010 .110 ±.015 .102 (2.59) .015 (0.38)
Non-Magnetic Barrier
(2.79
(2.79 ±0.38)
max.
±.010 (0.25)
Termination
+0.89 -0.25)
Y
B
Non-Mag
Pellet
WIDTH
(W)
T
W
L
LENGTH
(L)
LEAD AND TERMINATION
DIMENSIONS AND MATERIALS
.110
+.025 -.010 .110 ±.015
(2.79
(2.79 ±0.38)
+0.64 -0.25)
Y
Meets
Requirements
Meets
Requirements
W/T IS A
TERMINATION SURFACE
*
.135 ±.015
(3.43 ±0.38)
T
LL
.110 ±.015
(2.79 ±0.38)
WL
T
.004
±.001
(.102
±.025)
N/A
.106 (2.69)
max.
LL
B
Non-Mag
Radial Wire
T
L
W
LL
B
Non-Mag
Axial Wire
.145 ±.020
(3.68 ±0.51)
W
L
•
T
*Capacitors with values greater than 200 pF contain a trace magnetic element that may exhibit weak magnetic properties.
**Additional lead styles available: Narrow Microstrip (DN), Narrow Axial Ribbon (GN) and Vertical Narrow Microstrip (HN). Other lead lengths are available;
consult factory; All leads are high purity silver attached with high temperature solder and are RoHS compliant.
Suggested Mounting Pad Dimensions
A M E R I C A N
4
ATC North America
[email protected]
T E C H N I C A L
C E R A M I C S
ATC Europe
[email protected]
ATC Asia
[email protected]
www.at c er am ic s .c om
ATC 700 B Performance Data
ESR VS. CAPACITANCE
ATC SERIES 700, CASE B
Q VS. CAPACITANCE
ATC SERIES 700, CASE B
100000
1
150 MHz
1000 MHz
0.1
Q
ESR (Ohms)
10000
1000
500 MHz
500 MHz
1000 MHz
150 MHz
100
(Typical)
(Typical)
0.01
10
1
10
100
1
10
100
C
CAPACITANCE
(pF)
(1.0 pF to 51 pF)
C
CAPACITANCE
(pF)
(1.0 pF to 51 pF)
ESR VS. CAPACITANCE
ATC SERIES 700, CASE B
Q VS. CAPACITANCE
ATC SERIES 700, CASE B
1
1000
100
1000 MHz
0.1
500 MHz
Q
ESR (Ohms)
150 MHz
1000 MHz
500 MHz
10
150 MHz
(Typical)
(Typical)
0.01
1
10
100
1000
10
100
C
CAPACITANCE
(pF)
(56 pF to 200 pF)
C
CAPACITANCE
(pF)
(56 pF to 200 pF)
ESR VS. CAPACITANCE
ATC SERIES 700, CASE B
Q VS. CAPACITANCE
ATC SERIES 700, CASE B
1
1000
100
500 MHz
0.1
Q
ESR (Ohms)
150 MHz
500 MHz
10
150 MHz
(Typical)
(Typical)
0.01
1
100
1000
10000
100
A M E R I C A N
ATC North America
[email protected]
1000
10000
C
CAPACITANCE
(pF)
(220 pF to 5100 pF)
C
CAPACITANCE
(pF)
(220 pF to 5100 pF)
T E C H N I C A L
C E R A M I C S
ATC Europe
[email protected]
ATC Asia
[email protected]
www.at c er am ic s .c om
5
ATC 700 B Performance Data
SERIES RESONANCE VS. CAPACITANCE
ATC SERIES 700, CASE B
CURRENT RATING VS. CAPACITANCE
ATC SERIES 700, CASE B
100
100
RMS CURRENT (Amps)
FREQUENCY (GHz)
10
The current rating is based on a 65°C mounting
surface and a device thermal resistance of
20°C/W. A power dissipation of 3 W will result
in a case temperature of 125°C.
1
0.1
10
1000 MHz
500 MHz
1
0.1
0.1
1
10
100
1000
0.1
10000
1
CURRENT RATING VS. CAPACITANCE
ATC SERIES 700, CASE B
00
The current rating is based on a 65°C mounting
surface and a device thermal resistance of
20°C/W. A power dissipation of 3 W will result
in a case temperature of 125°C.
10
150 MHz
500 MHz
1000 MHz
30 MHz
Dotted line = Power dissipation limited
Solid line = Voltage limited (Vrms)
The current rating is based on a 65°C mounting
surface and a device thermal resistance of
20°C/W. A power dissipation of 3 W will result
in a case temperature of 125°C.
30 MHz
10
1
150 MHz
500 MHz
Dotted line = Power dissipation limited
Solid line = Voltage limited (Vrms)
1
10
100
100
1000
1000
C
CAPACITANCE
(pF)
(220 pF to 5100 pF)
C
CAPACITANCE (pF)
(56 pF to 200 pF)
CAPACITANCE CHANGE VS. TEMPERATURE
ATC SERIES 700, CASE B
1
TC= 0 ± 30 PPM/°C
% CHANGE IN CAPACITANCE
0.8
0.6
0.4
0.2
0
-0.2
-0.4
-0.6
-0.8
-1
-55
-35
-15
5
25
45
65
85
105
125
TEMPERATURE (Degrees C)
A M E R I C A N
6
100
CURRENT RATING VS. CAPACITANCE
ATC SERIES 700, CASE B
RMS CURRENT (Amps)
RMS CURRENT (Amps)
10
CAPACITANCE
(pF)
C
(0.1 pF to 51 pF)
CAPACITANCE
(pF)
C
100
30 MHz
Dotted line = Power dissipation limited
Solid line = Voltage limited (Vrms)
(Typical)
0.01
150 MHz
ATC North America
[email protected]
T E C H N I C A L
C E R A M I C S
ATC Europe
[email protected]
ATC Asia
[email protected]
www.at c er am ic s .c om
10000
ATC 700 B Performance Data
CURRENT RATING VS. CAPACITANCE
ATC SERIES 700, CASE B, EXTENDED VOLTAGE
100
The current rating is based on a 65 °C mounting surface
with a device thermal resistance of 20 °C/W. A power
dissipation of 3 W will result in a case temperature of 125 °C.
RMS CURRENT (Amps)
RMS CURRENT (Amps)
100
CURRENT RATING VS. CAPACITANCE
ATC SERIES 700, CASE B, EXTENDED VOLTAGE
10
1000 MHz
500 MHz
30 MHz
150 MHz
1
Dotted Line = Power dissipation limited
Solid line = Voltage limited (Vrms)
0.1
0.1
1
10
100
The current rating is based on a 65ºC mounting surface
with a device thermal resistance of 20ºC/W. A power
dissipation of 3 W will result in a case temperature of 125ºC.
30 MHz
150 MHz
10
500 MHz
Dotted line = Power dissipation limited
Solid line = Voltage limited (Vrms)
1
10
ATC North America
[email protected]
100
1000
CAPACITANCE (pF)
(56 pF to 200 pF)
CAPACITANCE (pF)
(0.1 pF to 51 pF)
A M E R I C A N
1000 MHz
T E C H N I C A L
C E R A M I C S
ATC Europe
[email protected]
ATC Asia
[email protected]
www.at c er am ic s .c om
7
Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC
document #001-992 Rev. B 12/05). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at
www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale.
ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of
rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice.
© 1996 American Technical Ceramics Corp. All Rights Reserved
A M E R I C A N
ATC North America
[email protected]
ATC # 001-814 Rev. R, 8/13
T E C H N I C A L
C E R A M I C S
ATC Europe
[email protected]
ATC Asia
[email protected]
www.at c er am ic s .c om