Catalog: 1654986 Issue Date: 06.2011 Corcom Facility EMI Filters Product Guide CDEUL Series - Extended Range Buffer Networks (Inductive Input) CDEUL Series Filter Cabinet 60 Hz Models Only • Modified NEMA I, constructed of not less than #14 gauge CRS with galvanized bulkhead • Blue epoxy finish to all non-conductive surfaces • R.F. Radiation of the shielded (load) compartment greater than 100 dB from 14 kHz to 10 GHz • Front cover access, dual cover design • Filter inserts pre-wired to standoffs and lugs • Lifting hooks and mounting tabs • Legs for floor mount available (see page 24) Individual Filters • Sealed components with welded and/or soldered seams • Constructed of not less than #16 gauge steel with corrosion resistant plating • Bleeder resistor to eliminate shock hazard provided • HEMP Surge arrestors provided upon request‡ Electrical Characteristics Voltage Drop: Less than 1% @ unity power factor Overload: 140% of rated current for 15 minutes Harmonic Distortion: Less than 2% @ full rated current Dielectric Withstanding Voltage: Per MIL-PRF-15733 and UL1283 D.C. Insulation Resistance: Per MIL-STD-202, Method 302 Terminal Strength: Per MIL-STD-202, Method 211, Condition E Temperature Rise: Shown with optional legs Center mounting bracket not installed on all sizes Per MIL-PRF-15733 and UL1283 R.F. Radiation: 100 dB minimum shielding effectiveness How to Order: CDEUL 4 01000 A6 -S -L Insertion Loss: Legs Surge Arrestors (optional) Voltage/Frequency 100 dB from 14 kHz - 10 GHz per MIL-STD-220A, under load condition, using extended range buffer networks over the frequency range of 14 kHZ - 20 MHz A6 - 120/208V, 60Hz B6 - 277/480V, 60Hz A4 - 120/208V, 400Hz Current Rating 2 Applicable Publications: # of Filtered Phases Series MIL-PRF-15733 — Filters, radio interference MIL-STD-202 — Test methods for Components Examples: CDEUL401000A6-S-L = MIL-STD-220A — Test method of Insertion Loss MIL-STD-188-125 — HEMP MIL-STD-285 — Test method for Shielding Effectiveness NFPA 70-1987 — National Electric Code 486A - 1983 — Wire Connectors and Lug UL1283 — UL standard for EMI Filters 1 4, 1000A CDEUL, 120/280V filters in cabinet with surge arrestors and legs CDEUL300030B6 = 3, 30A CDEUL, 277/480V filters in cabinet Note 1: Surge Arrestor for A6/A4* Models: V251BA60 Surge Arrestor for B6 Models: V481BA60 Note 2: Current configuration listed as 5 digits with leading zeros ‡ Intended for HEMP applications <150A. For filters rated >225A refer to the new TECUL Series on page 14. 12 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: Corcom Prods: 1-800-468-2023 1-847-680-7400 te.com corcom.com Catalog: 1654986 Issue Date: 06.2011 Corcom Facility EMI Filters Product Guide CDEUL Series - ERBN (Inductive Input) (continued) Mounting Brackets E A C Removable Cover RF Gasket Removable Individual Phase Filters B D Corcom Facility EMI Filters — NEMA Cabinet Style Center mounting bracket not installed on all sizes 2 Removable Cover For optional legs, refer to page 24 Area for Conduit Penetration Recommended torque for fasteners on removable cover: 25 in. lb. ± 3 in. lb. # Filtered phases @ rated current 2 @ 10A 3 @ 10A 4 @ 10A 2 @ 30A 3 @ 30A 4 @ 30A 2 @ 60 or 100A 3 @ 60 or 100A 4 @ 60 or 100A 2 @ 150A 3 @ 150A 4 @ 150A A 14.0 355.6 20.0 508.0 26.0 660.4 16.0 406.4 23.0 584.2 30.0 762.0 16.0 406.4 23.0 584.2 30.0 762.0 16.0 406.4 23.0 584.2 30.0 762.0 Dimensions B C D 30.0 6.0 22.0 762.0 152.4 558.8 30.0 6.0 22.0 762.0 152.4 558.8 30.0 6.0 22.0 762.0 152.4 558.8 38.0 8.0 26.0 965.2 203.2 660.4 38.0 8.0 26.0 965.2 203.2 660.4 38.0 8.0 26.0 965.2 203.2 660.4 44.0 10.0 32.0 1117.6 254.0 812.8 44.0 10.0 32.0 1117.6 254.0 812.8 44.0 10.0 32.0 1117.6 254.0 812.8 54.0 14.0 42.0 1371.6 355.6 1066.8 54.0 14.0 42.0 1371.6 355.6 1066.8 54.0 14.0 42.0 1371.6 355.6 1066.8 Max. Operating Voltage A6: 120/208V, 60 Hz B6: 277/480V, 60 Hz A4*: 120/208V, 400 Hz Weight E (Pounds/KG) 16.0 95 406.4 43.1 22.0 100 558.8 45.4 28.0 120 711.2 54.4 18.0 170 457.2 77.1 25.0 240 635.0 108.9 32.0 300 812.8 136.1 18.0 240 457.2 108.9 25.0 310 635.0 140.6 32.0 400 812.8 181.4 18.0 320 457.2 145.1 25.0 430 635.0 195.0 32.0 650 812.8 294.8 # Filtered phases @ rated current A 16.0 2 @ 225A 406.4 23.0 3 @ 225A 584.2 30.0 4 @ 225A 762.0 22.0 2 @ 400A 558.8 30.0 3 @ 400A 762.0 38.0 4 @ 400A 965.2 38.0 2 @ 800A 965.2 56.0 3 @ 800A 1422.4 72.0 4 @ 800A 1828.8 56.0 2 @ 1000 or 1200A 1422.4 82.0 3 @ 1000 or 1200A 2082.8 106.0 4 @ 1000 or 1200A 2692.4 Dimensions B C D 54.0 14.0 42.0 1371.6 355.6 1066.8 54.0 14.0 42.0 1371.6 355.6 1066.8 54.0 14.0 42.0 1371.6 355.5 1066.8 64.0 26.0 61.5 1625.6 660.4 1562.1 64.0 26.0 61.5 1625.6 660.4 1562.1 64.0 26.0 61.5 1625.6 660.4 1562.1 70.0 26.0 67.5 1778.0 660.4 1714.5 70.0 26.0 67.5 1778.0 660.4 1714.5 70.0 26.0 67.5 1778.0 660.4 1714.5 70.0 26.0 67.5 1778.0 660.4 1714.5 70.0 26.0 67.5 1778.0 660.4 1714.5 70.0 26.0 67.5 1778.0 660.4 1714.5 Weight E (Pounds/KG) 18.0 380 457.2 172.4 25.0 520 635.0 235.9 32.0 700 812.8 317.5 24.0 800 609.6 362.9 32.0 1100 812.8 498.9 40.0 1400 1016.0 635.0 40.0 1400 1016.0 635.0 58.0 2100 1473.2 952.5 74.0 2600 1879.6 1179.3 58.0 2000 1473.2 907.2 84.0 3000 2133.6 1360.8 108.0 3800 2743.2 1723.6 *400Hz filters available upon request. Will require external power factor correction coil. Please contact TE Connectivity Application Engineering 847-573-6517. Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: Corcom Prods: 1-800-468-2023 1-847-680-7400 13 te.com corcom.com