DESCRIPTION BY APPD DATE 01 PRELIMINARY DRAWING EWR08-3197-1 WPM 2. FIBER CONTACT REPLACEMENT KIT FOR ASSEMBLIES: 7763-3-3 (NOT PRE-POLISHED)AND 7763-4-3 (PRE-POLISHED) REV JDS 06/24/10 NOTES: UNLESS OTHERWISE SPECIFIED 1. INTERFACE COMPLIANT TO SMPTE 304 SPECIFICATION 3. USE CABLE ASSEMBLY PROCEDURE: CAP-E06. 2X PRE-POLISHED FERRULE ASSEMBLY 2X SPLICE SLEEVE CATALOG P/N: 7760-000-00711Z PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 1:1 THIRD ANGLE Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 CUSTOMER SALES DRAWING DRAWN JDS APPROVED JCF DMF026 B DATE APPROVED 06/24/10 WPM DATE APPROVED 06/30/10 PP DATE 06/30/10 DATE 06/30/10 PRE-POLISHED FIBER CONTACT KIT FOR FIBER OPTIC CAMERA JACK A SD7760-000-00711Z SHT 1 OF REV 1 01