WINCHESTER SD7760-000

3. FINISH SPECIFICATIONS:
STAINLESS STEEL PARTS: PASSIVATE
CONTACTS: .000100 MIN GOLD PER ASTM B488 OVER
.000080 MIN NICKEL PER AMS-QQN-290 (RoHS)
CRIMP SLEEVE: .000100 MIN NICKEL PER AMS-QQ-N-290 OVER
COPPER FLASH PER ASTM B734 (RoHS)
O-RING
2X CONTACT
DESCRIPTION
A
RELEASED PER
ER22697
BY
APPD
DATE
WPM
2. MATERIAL SPECIFICATIONS:
CONTACTS: COPPER ALLOY
CRIMP SLEEVE: PHOS. BRONZE
O-RING: SILICONE RUBBER
SHIELD GROUND: 303 STAINLESS STEEL PER ASTM A582
REV
PSM
04/08/09
NOTES: UNLESS OTHERWISE SPECIFIED
1. INTERFACE COMPLIANT TO SMPTE 304 SPECIFICATION.
2X CONTACT
4. REPLACEMENT KIT FOR ASSEMBLY: 7763-3-3
5. CABLE ASSEMBLY PROCEDURE CAP-E05
GROUND SHIELD
CRIMP SLEEVE
2X FERRULE ASSEMBLY
CATALOG P/N: 7760-000-00702Z
PER ASME Y14.5M-1994
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES [MM]
TOLERANCES:
DECIMAL: .XX [X.X] ± .01 [0.3]
.XXX [X.XX] ± .005 [0.13]
.XXXX [X.XXX] ± .XXXX
ANGLES: ± 2°
SCALE: 2:1
THIRD
ANGLE
Winchester Electronics Corporation
62 Barnes Industrial Road North
Wallingford, Connecticut 06492
CUSTOMER
SALES DRAWING
DRAWN
PSM
APPROVED
RL
DMF026 B
DATE APPROVED
03/30/09 WPM
DATE APPROVED
08/17/09
JF
DATE
08/17/09
DATE
08/17/09
KIT - CONTACT
A
SD7760-000-00702Z
SHT
1
OF
1
REV
A