DESCRIPTION BY APPD DATE B REVISED PER ER26608 XXX 1. MATERIAL SPECIFICATIONS: BOOT AND CAP: SANTOPRENE 101-55 LANYARD AND CRIMP SLEEVE: STAINLESS STEEL SHRINK TUBING: POLYOLEFIN REV JDS 09/13/10 NOTES: UNLESS OTHERWISE SPECIFIED 2. REPLACEMENT ENVIRONMENTAL RUBBER CAP AND LANYARD FOR SMPTE 304 JACK 3. FITS 7763-3-3 AND 7763-4-3, FIBER TRI-LOC SMPTE 304 JACKS ALREADY EQUIPPED WITH ENVIRONMENTAL BOOT 7.4±.5 187.96±12.70 +.2 CATALOG P/N: 7760-000-00707Z +5.08 .00 1.3 - .0 33.02 PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .X [X.X] ± .2 [5] .XX [X.XX] ± .05 [1.3] .XXX [X.XXX] ± .XXX ANGLES: ± 2° SCALE: 1:2 THIRD ANGLE Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 CUSTOMER SALES DRAWING DRAWN JJN APPROVED JF DMF029 B DATE APPROVED 02/22/10 WPM DATE APPROVED 02/22/10 XXX DATE 02/22/10 DATE XX/XX/XX FIBER TRI-LOC JACK RUBBER CAP AND LANYARD A SD7760-000-00707Z SHT 1 OF 1 REV B