Pluggable Input / Output Solutions SFP+ Products Product Facts ■ SFP+ interconnect system supports data rates of 10 Gb/s ■ Connector designed to support 10 Gb/s+ signal speeds, backward compatible with SFP ■ Both EMI spring and gasket options for cages provide excellent shielding ■ All cage configurations are offered with lightpipes for LED applications ■ Heat sink optional for single port cages ■ Cages are available for PCI card applications (one degree mounting angle) ■ Cages accommodate belly-to-belly mounting ■ Stacked cages include integrated high speed connector using patented wafer construction ■ Active and passive copper cable assemblies provide a cost-effective solution for short reach applications Applications ■ Storage ■ Servers ■ Networking ■ Switches ■ Routers ■ Hubs ■ Network Interface Cards (NICs) SFP+ extends the use of the Small Form-Factor Pluggable (SFP) interconnect up to 10 Gb/s. This system meets the performance requirements of SFF (Small FormFactor) specification SFF-8431 and supports 8G Fibre Channel and 10G Ethernet applications. The SFP+ product family includes cages, connectors, and copper cable assemblies. SFP+ cages are offered with both EMI springs and elastomeric conductive gaskets for EMI containment at the panel opening, and come in single port, ganged and stacked port configurations. Connectors are designed to optimize performance at higher data rates. A conductive EMI plug is available to reduce EMI through an empty (unused) SFP+ cage port. Tyco Electronics also offers LC optical connectors and cable assemblies to link with SFP+ transceivers. Technical Documents Application Specifications 114-13120 Single & Ganged Cages 114-13219 Stacked Cages Product Specification 108-2331 Industry Standards SFF-8432 SFF-8083 SFF-8431 Cage and module definition Mating Interface and performance requirements Electrical Interface Specifications Fibre Channel is a trademark of the Fibre Channel Industry Association. PCI is a trademark of PCI-SIG. 20 Catalog 1773408-1 Revised 2-09 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Pluggable Input / Output Solutions SFP+ Single Port and Ganged Cages Cages with EMI Springs Description Cage Assy w/ Lightpipes Cage Assy Cage Assy w/ PCI Heat Sink Cage Assy w/ SAN Heat Sink Cage Assy w/ Networking Heat Sink Single Port 2007254-1 2007198-1 2007464-1 2007464-2 2007464-3 1x2 2007262-1 2007263-1 — — — 1x4 2007178-1 2007132-1 — — — 1x6 2007250-1 2007251-1 — — — Cages with Elastomeric Gaskets Description Cage Assy w/ Lightpipes Cage Assy 1x2 2007180-1 2007181-1 1x4 2007093-1 2007135-1 1x6 2007169-1 2007170-1 Cages for PCI Applications One degree mounting angle to meet requirements of SFF-8075 1° Description Cage Assy Cage Assy w/ PCI Heat Sink & Clip Solder 2007194-1 2007193-1 Press-Fit 2007215-1 2007277-1 Connectors Contact Plating 0.76 µm (30 µin) gold 0.38 µm (15 µin) gold PCI is a trademark of PCI-SIG. Part Number 1888247-1 1888247-2 Note: All part numbers are RoHS compliant. 21 Catalog 1773408-1 Revised 2-09 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Pluggable Input / Output Solutions SFP+ Stacked (Dual Row) Cage/Connector Assemblies Stacked SFP+ Cage/ Connector Assemblies Description EMI Containment Style Elastomeric Gasket Elastomeric Gasket Elastomeric Gasket Elastomeric Gasket EMI Springs EMI Springs EMI Springs EMI Springs Lightpipe Option Four Per Column Inner Lightpipes Only Outer Lightpipes Only None Four Per Column Inner Lightpipes Only Outer Lightpipes Only None 2x1 2007538-5 2007538-6 2007538-7 2007538-8 2007492-5 2007492-6 2007492-7 2007492-8 2x2 2007417-5 2007417-6 2007417-7 2007417-8 2007637-5 2007637-6 2007637-7 2007637-8 2x4 2007399-5 2007399-6 2007399-7 2007399-8 2007394-5 2007394-6 2007394-7 2007394-8 2x6 2007567-5 2007567-6 2007567-7 2007567-8 2007562-5 2007562-6 2007562-7 2007562-8 Note: Tin plated compliant pins listed, tin-lead compliant pins available for signal connector. See Tyco Electronics drawing. Dust Plug (Non-conductive) For Uses In Single Port Cages Ganged and Stacked (Multi-port) Cages Part Number 1367147-1 or 1761394-1 1761394-1 Note: Dust plug 1761394-1 has narrow width, required for port density in ganged and stacked cages. EMI Plug Part Number 1888901-1 Springs comply with SFF-8432 requirements for Improved Pluggable Form-factor (IPF) PCI is a trademark of PCI-SIG. Note: All part numbers are RoHS compliant. 22 Catalog 1773408-1 Revised 2-09 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Pluggable Input / Output Solutions SFP+ Copper Cable Assemblies Product Facts ■ Truly broadband — operates from 1 Gbps to 10 Gbps ■ Compatible with industry standard SFP cages ■ 100 Ohm differential impedance ■ 3.3 V input source voltage ■ EEPROM signature which can be customized ■ Pull-to-release retractable pin latch design ■ Pull tab allows compact belly-to-belly application ■ 360 degree cable braid crimp and enhanced EMI skirt ■ Various wire gauges provide flexible cable management options ■ Uses MADISON TURBOTWIN copper cable The Tyco Electronics SFP+ direct attach copper cable assembly is a low cost alternative for short reach applications. The design allows for a serial data transmission up to 10 Gbps in each direction. These SFP+ assemblies are hot swappable and the programmed EEPROM Type Standard Passive Other AWG Passive Active (Coming Soon) signature enables the host to differentiate between a copper cable assembly and a fiber optic module. The mechanical design of the braid crimp and EMI skirt help ensure that EMI radiation is sufficiently suppressed. Additionally, the copper cable acts as a natural heat sink. The low Part Number 2032237-1 2032237-2 2032237-4 2032237-6 1-2032237-1 2032247-1 2032247-2 2032247-4 2032247-6 1-2032247-1 2053649-1 2053649-2 2053649-4 2053649-6 2032246-1 2032246-2 2032246-4 2032246-6 2032757-1 2032757-5 1-2032757-0 1-2032757-5 AWG 24 24 24 24 24 26 26 26 26 26 28 28 28 28 30 30 30 30 24 24 24 24 power consumption assists in making the passive copper cable assembly an economic solution for within rack, or rack to rack applications. Standard SFP+ assemblies are offered in 24 AWG, however, several smaller wire gauges are available. Description 0.5 meter SFP+ Cable Assembly 1 meter SFP+ Cable Assembly 3 meter SFP+ Cable Assembly 5 meter SFP+ Cable Assembly 10 meter SFP+ Cable Assembly 0.5 meter SFP+ Cable Assembly 1 meter SFP+ Cable Assembly 3 meter SFP+ Cable Assembly 5 meter SFP+ Cable Assembly 10 meter SFP+ Cable Assembly 0.5 meter SFP+ Cable Assembly 1 meter SFP+ Cable Assembly 3 meter SFP+ Cable Assembly 5 meter SFP+ Cable Assembly 0.5 meter SFP+ Cable Assembly 1 meter SFP+ Cable Assembly 3 meter SFP+ Cable Assembly 5 meter SFP+ Cable Assembly 1 meter SFP+ Cable Assembly 5 meter SFP+ Cable Assembly 10 meter SFP+ Cable Assembly 15 meter SFP+ Cable Assembly Note: All part numbers are RoHS compliant. 23 Catalog 1773408-1 Revised 2-09 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Pluggable Input / Output Solutions SFP+ Copper Cable Assemblies (Continued) High Speed Electrical Measurements Tyco Electronics SFP+ passive copper cable assemblies are fully compliant to SFF-8431. WDP Measurements WDP Specifications WDP measurements listed in the table below are for set lengths at two different cable gauges. Any cable with the same gauge and a shorter length than the length listed will have a lower dWDP number. Measurements were taken with an input signal that had pre-emphasis applied to achieve a WDPi of 2.4 dBe while using the SFP+ Module Compliance Board (MCB) and Host Compliance Board (HCB). A copper cable assembly will be compliant with the SFP+ MSA Rev 3.2 if the dWDP number is less than 6.75 dBe. VMA and VCR Measurements VMA and VCR measurements listed in the table below are for the set lengths. To be compliant with SFF 8431 Rev 3.2 the VMA measurements must be less than 4.5 dB while testing with the module compliance test board. The VCR measurement is determined by computing VMA and NEXT RMS voltage measurements. The VCR measurement must be greater than 33 dB to be SFF-8431 Rev 3.2 compliant. Cable Gauge Spec Limit 30 AWG 28 AWG 26 AWG 24 AWG Cable Length — 3 meter 5 meter 6 meter 7 meter WDPo (dB) — 6.16 7.49 8.36 7.44 WDPi (dB) — 2.4 2.4 2.4 2.4 dWDP 6.75 3.76 5.09 5.96 5.04 VMA and VCR Specifications Cable Gauge Spec Limit 30 AWG 28 AWG 26 AWG 24 AWG Cable Length — 3 meter 5 meter 6 meter 7 meter VMA (dB) 4.5 3.03875 3.93609 3.94267 2.86154 VCR (dB) 33 40.6572 38.53281 35.82669 37.79826 For additional SFP+ cable assembly technical information, see customer drawing 2032237. Note: All part numbers are RoHS compliant. 24 Catalog 1773408-1 Revised 2-09 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208