MACOM 6-104071-9

AMPMODU Interconnection System
AMPMODU System 50 Connectors
(Page 52)
(Page 44)
(Page 38)
(Page 40)
AMPMODU System 50
(Page 39)
(Page 31)
(Page 45)
(Page 29)
Double Row, .025
Ribbon Cable
Mount Receptacle
(Page 56)
(Page 33)
(Page 34)
3
(Page 50)
(Page 30)
(Page 28)
(Page 32)
(Page 37)
(Page 27)
The AMPMODU System 50
connector family includes a
wide variety of high density
board-to-board (thru-hole
and surface-mount) and
cable-to-board connectors.
AMPMODU System 50 is
composed of one- and tworow receptacles and post
headers on .050 x .100
[1.27 x 2.54] spacing
between contacts for
extreme density and
efficient use of printed
circuit board area.
AMPMODU System 50
receptacles and header
assemblies can be
categorized in three groups:
board-mount headers,
board-mount receptacles
and cable-to-board
receptacles. Receptacle
contacts and mating .015
[0.38] square posts are
formed from high
conductivity copper alloy
and are selectively plated
with gold to promote higher
performance and reliability.
Board-mounted thru-hole
post headers and
receptacle connectors are
available for right-angle
and vertical mating
configurations. Surfacemounted connectors are
available in vertical, double
row styles for parallel
stacking applications.
Shrouded post headers
provide polarization to
mating cable receptacles
and aid alignment of mating
connectors. Unshrouded
headers allow close
stacking of daughter cards.
Vertical stacking connectors
space parallel mated
boards as shown in the
illustration on page 63.
Housings on all boardmount assemblies are made
of high temperature tolerant
materials and incorporate
stand-offs for free drainage
of flux cleaning solutions.
(Page 50)
mating headers (thru-hole or
surface-mount). Ribbon
cable connectors mass
terminate 30 AWG [0.05
mm2] solid and 32 AWG
[0.03 mm2] stranded, .025
[0.64] centerline ribbon
cable with PVC or Teflon®
insulation.
■ Recognized under the
Connectors for mass
termination to FFC cable or
flexible etched circuitry
have dual beam contacts;
options include shielded
cable and solder tabs. Both
types of cable connectors
are available as component
parts and as completed
assemblies.
*CSA certification pending on certain products,
as noted.
The variety of components
and application possibilities,
combined with small size
and outstanding quality,
make AMPMODU
System 50 suitable for high
density systems.
Quality Management
System certified
to ISO 9001
ISO900e1d
A copy of the
tifi
Cable-to-board connectors
have integral latches for
positive locking to shrouded
Component Program of
Underwriters
Laboratories Inc.
File No. E28476
■ Certified by
Canadian Standards
Association*,
File No. LR 7189
R
R
Dimensioning:
Dimensions are in inches and millimeters.
Values in brackets are metric equivalents. Metric
symbols used are:
mm (millimeter)
cm (centimeter)
m (meter)
mm2 (square millimeter)
C (Celsius)
N (newton)
kg (kilogram)
■ Produced under a
certificate is available
upon request.
r
Ce
Teflon® is a trademark of E.I. du Pont de
Nemours and Company.
25
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Thru-Hole Headers––Shrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board
Board-to-Board Connectors,
Thru-Hole
Product Facts
3
■
High density; contacts
spaced on .050 x .100
[1.27 x 2.54] centers
■
Single row; select sizes 4
thru 50 positions
■
Double row; select sizes 10
thru 100 positions
■
Stand-offs for ease of
cleaning
■
High temperature tolerant
thermoplastic housings
■
Shrouded and unshrouded
headers available in single
and double row, vertical
and right-angle
configurations
The AMPMODU System 50
interconnection system is
designed to better meet
industry’s need for a high
density interconnect
system. The Board
Mounted Thru-Hole
Headers are available in
shrouded and unshrouded
versions. They are
composed of single and
double row post headers
with .050 x .100
[1.27 x 2.54] spacing
between contacts for
extreme density and
efficient use of printed
circuit board area. The
headers are available in
4 through 50 positions, in
a single row configuration,
and 10 through 100
positions, in a double row
design.
Board mounted post
headers are available in
right-angle and vertical
configurations. Shrouded
post headers provide
polarization and alignment
features for mating printed
circuit boards and cable
connectors, while
unshrouded headers allow
close stacking of daughter
cards. Housings for the
headers are made of black
thermoplastic material with
a 94V-0 rating. The
housings have stand-offs
for free drainage of flux
cleaning solutions.
26
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Thru-Hole Headers––Shrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Single Row, Right-Angle
with Solder Clips
Circuit Identification
Feature*
.060
[1.52]
2 Plc.
Headers, Shrouded and
Unshrouded
Solder
Clip
.100
[2.54]
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
3
See Note 2.
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 38,
49 & 50
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
See Note 1.
No. of
Pos.
4
5
6
8
10
12
15
20
22
25
28
30
36
40
45
50
Dimension
A
.330 [8.38]
.380 [9.65]
.430 [10.92]
.530 [13.46]
.630 [16.00]
.730 [18.54]
.880 [22.35]
1.130 [28.70]
1.230 [31.24]
1.380 [35.05]
1.530 [38.86]
1.630 [41.40]
1.930 [49.02]
2.130 [54.10]
2.380 [60.45]
2.630 [66.80]
Part Numbers
5-104074-7
5-104074-2
5-104074-8
6-104074-0
5-104074-1
6-104074-1
5-104074-3
5-104074-4
6-104074-4
5-104074-5
7-104074-0
5-104074-6
6-104074-6
6-104074-7
6-104074-8
6-104074-9
*Circuit identification feature omitted on 4, 5 and 6 position headers.
Notes:
1. Solder Clips located as shown for 10 through 30 position headers.
2. Solder Clips located as shown for 4 through 8 and 36 through 50 position headers.
Note: All part numbers are RoHS compliant.
27
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Thru-Hole Headers––Shrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Headers, Shrouded and
Unshrouded
Single Row, Vertical
.060 [1.52]
2 Plc.
Circuit Identification
Feature*
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .00050 [0.00127] nickel
3
Post Length
(See chart
below)
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 38,
49 & 50
Board-to-Board Spacing — page 63
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
No. of
Pos.
Dimension
A
4
5
6
8
10
12
13
15
17
20
22
25
30
36
40
50
.330 [8.38]
.380 [9.65]
.430 [10.92]
.530 [13.46]
.630 [16.00]
.730 [18.54]
.780 [19.81]
.880 [22.35]
.980 [24.89]
1.130 [28.70]
1.230 [31.24]
1.380 [35.05]
1.630 [41.40]
1.930 [49.02]
2.130 [54.10]
2.630 [66.80]
Part Numbers
Post Length
.100 [2.54]
5-104071-7
5-104071-2
5-104071-8
6-104071-0
5-104071-1
6-104071-1
6-104071-2
5-104071-3
6-104071-3
5-104071-4
6-104071-4
5-104071-5
5-104071-6
6-104071-6
6-104071-7
6-104071-9
.145 [3.68]
—
—
—
—
—
5-104804-3
—
5-104804-2
—
—
—
—
—
—
—
—
*Circuit identification feature omitted on 4, 5, and 6 position headers.
Note: All part numbers are RoHS compliant.
28
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Thru-Hole Headers––Shrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Double Row, Right-Angle
with Solder Clips
Circuit Identification
Feature*
Headers, Shrouded and
Unshrouded
.060
[1.52]
2 Plc.
Solder
Clip
Post Length
(See chart
below)
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
3
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 40,
45, 51, 52, & 56
PC Board Hole Layout — page 41
See Note 2.
See Note 1.
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
Part Numbers
No. of
Pos.
Dimension
A
8
10
12
14
16
20
24
26
30
34
40
50
60
68
72
80
100
.330 [8.32]
.380 [9.65]
.430 [10.92]
.480 [12.19]
.530 [13.46]
.630 [16.00]
.730 [18.54]
.780 [19.81]
.880 [22.35]
.980 [24.89]
1.130 [28.70]
1.380 [35.05]
1.630 [41.40]
1.830 [46.48]
1.930 [49.02]
2.130 [54.10]
2.630 [66.80]
Post Length
.100 [2.54]
5-104069-8
5-104069-4
—
6-104069-0
6-104069-1
5-104069-1
6-104069-2
6-104069-3
5-104069-5
6-104069-4
5-104069-6
5-104069-2
5-104069-7
6-104069-8
6-104069-6
5-104069-3
6-104069-7
.145 [3.68]
—
6-104477-2
5-104477-8
—
—
5-104477-2
6-104477-0
—
5-104477-3
—
5-104477-4
5-104477-5
5-104477-9
—
5-104477-1
5-104477-6
5-104477-7
*Circuit identification feature omitted on 8, 10 and 12 position headers.
Notes:
1. Solder Clips located as shown for 16 through 100 position headers.
2. Solder Clips located as shown for 8 through 12 and 60 through 100 position headers.
Note: All part numbers are RoHS compliant.
29
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Thru-Hole Headers––Shrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Headers, Shrouded and
Unshrouded
Double Row, Vertical
.060 [1.52]
2 Plc.
Circuit Identification
Feature*
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contact — Copper alloy; duplex plated
.000030 [0.00076] gold in mating area,
.000150 [0.00381] tin on solder posts,
with entire contact underplated .000050
[0.00127]nickel
3
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — pages 40,
45, 51, 52, & 56
Board-to-Board Spacing — page 63
PC Board Hole Layout — page 41
Post Length
(See chart
below)
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
No. of
Pos.
10
12
14
16
20
24
26
30
34
40
44
50
60
68
72
80
100
Part Numbers
Post Length
Dimension
A
.100 [2.54]
5-104068-2
5-104068-8
5-104068-9
6-104068-0
5-104068-1
6-104068-1
6-104068-2
5-104068-3
6-104068-3
5-104068-4
6-104068-4
5-104068-5
5-104068-6
6-104068-8
6-104068-5
6-104068-6
6-104068-7
.380 [9.65]
.430 [10.92]
.480 [12.19]
.530 [13.46]
.630 [16.00]
.730 [18.54]
.780 [19.81]
.880 [22.35]
.980 [24.89]
1.130 [28.70]
1.230 [31.24]
1.380 [35.05]
1.630 [41.40]
1.830 [46.48]
1.930 [49.02]
2.130 [54.10]
2.630 [66.80]
.145 [3.68]
—
—
—
5-104666-9
5-104666-1
6-104666-0
—
5-104666-2
—
5-104666-3
—
5-104666-4
5-104666-7
5-104666-8
—
5-104666-5
5-104666-6
*Circuit identification feature omitted on 10 and 12 position headers.
Note: All part numbers are RoHS compliant.
30
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Thru-Hole Headers––Shrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Double Row, Vertical
With Card Slots
Headers, Shrouded and
Unshrouded
Circuit Identification
Feature
.125
[3.18]
Material and Finish
3
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — page 39
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
No. of
Pos.
10
20
30
40
50
60
80
100
Dimension
A
.394 [10.01]
.644 [16.36]
.894 [22.71]
1.144 [29.06]
1.394 [35.41]
1.644 [41.76]
2.144 [54.46]
2.644 [67.16]
Part
Numbers
5-104076-5
5-104076-1
5-104076-6
5-104076-3
5-104076-7
5-104076-2
5-104076-4
5-104076-8
Note: All part numbers are RoHS compliant.
31
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Thru-Hole Headers––Unshrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board
Headers, Shrouded and
Unshrouded
Single Row, Right-Angle
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
3
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 37,
38, 49, & 50
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
No. of
Pos.
4
8
12
15
17
20
25
30
31
40
Dimension
A
.215 [5.46]
.415 [10.54]
.615 [15.62]
.765 [19.43]
.865 [21.97]
1.015 [25.78]
1.265 [32.13]
1.515 [38.48]
1.565 [39.75]
2.015 [51.18]
Part
Numbers
5-104186-1
5-104186-5
5-104186-7
5-104186-9
6-104186-0
6-104186-1
6-104186-3
6-104186-5
7-104186-0
6-104186-7
Note: All part numbers are RoHS compliant.
32
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Thru-Hole Headers––Unshrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Single Row, Vertical
.125
[3.18]
.015
[0.38]
.100
[2.54]
Headers, Shrouded and
Unshrouded
.096
[2.44]
.050 Typ.
[1.27]
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
A
.100
[2.54]
.048
[1.22]
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — pages 37,
38, 49, & 50
Board-to-Board Spacing — page 63
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
No. of
Pos.
4
6
8
10
20
25
Dimension
A
.215 [5.46]
.315 [8.00]
.415 [10.54]
.515 [13.08]
1.015 [25.78]
1.265 [32.13]
Part
Numbers
5-104178-1
5-104178-3
5-104178-5
5-104178-6
6-104178-1
6-104178-3
Note: All part numbers are RoHS compliant.
33
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
3
AMPMODU Interconnection System
Thru-Hole Headers––Unshrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Headers, Shrouded and
Unshrouded
Double Row, Right-Angle
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
3
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — pages 39,
40, 45, 51 & 52
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
No. of
Pos.
10
20
30
40
50
60
80
100
Dimension
A
.265 [6.73]
.515 [13.08]
.765 [19.43]
1.015 [25.78]
1.265 [32.13]
1.515 [38.48]
2.015 [51.18]
2.515 [63.88]
Part
Numbers
5-104118-3
5-104118-7
6-104118-0
6-104118-2
5-104118-1
6-104118-4
6-104118-6
6-104118-7
Note: All part numbers are RoHS compliant.
34
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Thru-Hole Headers––Unshrouded, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Double Row, Vertical
.125
[3.18]
.100
[2.54]
.050
[1.27] Typ.
.100
[2.54]
.196
[4.98]
.100
[2.54]
Material and Finish
Headers
Shrouded and Unshrouded
.015
[0.38]
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
3
.048
[1.22]
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 39,
40, 45, 51, & 52
Board-to-Board Spacing — page 63
PC Board Hole Layout — page 42
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
No. of
Pos.
8
20
30
36
40
50
60
80
100
Dimension
A
.215 [5.46]
.515 [13.08]
.765 [19.43]
.915 [23.24]
1.015 [25.78]
1.265 [32.13]
1.515 [38.48]
2.015 [51.18]
2.515 [63.88]
Part
Numbers
5-103916-3
5-103916-2
5-103916-9
6-103916-8
6-103916-1
6-103916-3
6-103916-4
6-103916-6
6-103916-7
Note: All part numbers are RoHS compliant.
35
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Thru-Hole Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board
Product Facts
High density; contacts
spaced on .050 x .100
[1.27 x 2.54] centers
■ Right-angle and vertical
styles
■ Single row; select sizes 5
thru 50 positions
■ Double row; select sizes 10
thru 100 positions
■ Contacts are selectively
plated with gold
■ Stand-offs for removal of
solder flux
Receptacles
■
3
The AMPMODU System 50
thru-hole receptacles offer
a wide variety of high
density board-to-board
connectors. The .050 [1.27]
spacing between each
contact provides an
extremely dense
interconnect package and
results in a more efficient
use of the printed circuit
board space.
AMPMODU System 50
thru-hole receptacles are
available in right-angle and
vertical configurations and
are composed of single
and double row versions.
The single row versions are
available in select sizes of
5 thru 50 positions and
double row in positions
from 10 thru 100.
Receptacle contacts and
mating .015 [0.38] square
posts are formed from high
conductivity copper alloy
and are selectively plated
with gold for higher
performance and reliability.
The receptacle housings
are made of black
thermoplastic, with a 94V-0
rating to withstand high
temperatures of reflow
soldering and incorporate
stand-offs for free drainage
of flux cleaning solutions.
36
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Thru-Hole Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Single Row, Right-Angle
With Solder Clips
Receptacles
Circuit Identification
Feature
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
3
Solder
Clip
See Note 2.
See Note 1.
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — pages 32
& 33
PC Board Hole Layout — page 41
No. of
Pos.
10
15
20
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
Dimension
A
.544 [13.82]
.794 [20.17]
1.044 [26.52]
Part
Numbers
5-104196-2
5-104196-4
5-104196-5
Notes:
1. Solder Clips located as shown for 10 through 25 position receptacles.
2. Solder Clips located as shown for 5 and 25 position receptacles.
Note: All part numbers are RoHS compliant.
37
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Thru-Hole Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Receptacles
Single Row, Vertical
Circuit Identification
Feature
Material and Finish
3
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — pages 27,
28, 32, & 33
Board-to-Board Spacing — page 63
PC Board Hole Layout — page 41
Technical Documents — page 64
No. of
Pos.
10
12
15
20
30
Dimension
A
.544 [13.82]
.644 [16.35]
.794 [20.17]
1.044 [26.52]
1.544 [39.22]
Part
Numbers
5-104192-2
5-104192-3
5-104192-4
5-104192-5
5-104192-7
Product Specification 108-1093
Application Specification
114-25031
Note: All part numbers are RoHS compliant.
38
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Thru-Hole Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Double Row, Right-Angle
Receptacles
Circuit Identification
Feature
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
3
Solder
Clip
Related Product Data
See Note 2.
Performance Characteristics —
page 63
Mateable Connectors — pages 31,
34 & 35
PC Board Hole Layout — page 41
See Note 1.
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
No. of
Pos.
10
20
30
40
50
60
80
100
Dimension
A
.294 [7.47]
.544 [13.82]
.794 [20.17]
1.044 [26.52]
1.294 [32.87]
1.544 [39.22]
2.044 [51.92]
2.544 [64.62]
Part
Numbers
5-103911-1
5-103911-2
5-103911-7
5-103911-5
5-103911-4
5-103911-3
5-103911-6
5-103911-8
Notes:
1. Solder Clips located as shown for 20 through 100 position receptacles.
2. Solder Clips located as shown for 10, 60, 80 and 100 position receptacles.
Note: All part numbers are RoHS compliant.
39
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Thru-Hole Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board (Continued)
Receptacles
Double Row, Vertical
Post Length
(See chart
below)
Circuit Identification
Feature
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder posts, with entire contact
underplated .000050 [0.00127] nickel
3
Related Product Data
Performance Specifications —
page 63
Mateable Connectors — pages 29,
30, 34, 35 & 44
Board-to-Board Spacing — page 63
PC Board Hole Layout — page 41
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25031
No. of
Pos.
10
20
24
30
34
40
50
60
68
80
100
Dimension
A
.294 [7.47]
.544 [13.82]
.644 [16.36]
.794 [20.17]
.894 [22.71]
1.044 [26.52]
1.294 [32.87]
1.544 [39.22]
1.744 [44.30]
2.044 [51.92]
2.544 [64.62]
Part Numbers
Post Length
.100 [2.54]
5-104078-3
5-104078-1
5-104078-9
5-104078-4
6-104078-0
5-104078-2
5-104078-5
5-104078-6
6-104078-3
5-104078-7
5-104078-8
.145 [3.68]
—
—
—
—
—
—
5-104744-7
—
—
5-104744-4
5-104744-5
Note: All part numbers are RoHS compliant.
40
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Recommended PC Board Hole Layouts, Thru-Hole Board-to-Board Connectors
Single Row, Right-Angle
with Solder Clips
Note: Consult Tyco Electronics for
customer drawings detailing tolerances.
** This dimension is for Single Row
Right-Angle Receptacles only.
.037 Dia.
[0.94] Typ.
(Soldered
mechanical
solder clip)
Plated-Thru
Hole
PC Board Edge
No. of
Pos.
B
.150 [3.81]
.200 [5.08]
.250 [6.35]
.350 [8.89]
.450 [11.43]
.550 [13.97]
.700 [17.78]
.950 [24.13]
1.050 [26.67]
1.200 [30.48]
1.350 [34.29]
1.450 [36.83]
1.750 [44.45]
1.950 [49.53]
2.200 [55.88]
2.450 [62.23]
4
5
6
8
10
12
15
20
22
25
28
30
36
40
45
50
Double Row, Right-Angle
with Solder Clips
Dimensions
C
D
—
.075 [1.91]
—
.100 [2.54]
—
.125 [3.18]
—
.175 [4.45]
.350 [8.89]
.050 [1.27]
.450 [11.43]
.050 [1.27]
.600 [15.24]
.050 [1.27]
.850 [21.59]
.050 [1.27]
.950 [24.13]
.050 [1.27]
1.100 [27.94]
.050 [1.27]
1.250 [31.75]
.050 [1.27]
1.350 [34.29]
.050 [1.27]
1.650 [41.91]
.050 [1.27]
1.850 [46.99]
.050 [1.27]
2.100 [53.34]
.050 [1.27]
2.350 [59.69]
.050 [1.27]
E
—
—
—
—
—
—
—
—
—
—
.625 [15.88]
.675 [17.15]
.825 [20.96]
.925 [23.50]
1.050 [26.67]
1.175 [29.85]
3
.022 Dia.
[0.56] Typ.
Plated-Thru Hole
Note: Consult Tyco Electronics for
customer drawings detailing tolerances.
* This dimension is for Shrouded,
Double Row Right-Angle Headers
only.
** This dimension is for Double Row
Right-Angle Receptacles only.
.335**
[8.51]
PC Board Hole Layouts
* This dimension is for Shrouded,
Single Row Right-Angle Headers
only.
.022 Dia.
[0.56] Typ.
Plated-Thru Hole
.037 Dia.
[0.94] Typ.
(Soldered mechanical
solder clip)
Plated-Thru Hole
PC Board Edge
No. of
Pos.
10
20
24
26
30
34
40
50
60
68
72
80
100
B
.200 [5.08]
.450 [11.43]
.550 [13.97]
.600 [15.24]
.700 [17.78]
.800 [20.32]
.950 [24.13]
1.200 [30.48]
1.450 [36.83]
1.650 [41.91]
1.750 [44.45]
1.950 [49.53]
2.450 [62.23]
Dimensions
C
—
.350 [8.89]
.450 [11.43]
.500 [12.70]
.600 [15.24]
.700 [17.78]
.850 [21.59]
1.100 [27.94]
1.350 [34.29]
1.550 [39.37]
1.650 [41.91]
1.850 [46.99]
2.350 [59.69]
D
.100 [2.54]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
.050 [1.27]
E
—
—
—
—
—
—
—
—
.675 [17.15]
.775 [19.69]
.825 [20.96]
.925 [23.50]
1.175 [29.85]
41
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Recommended PC Board Hole Layouts, Thru-Hole
Board-to-Board Connectors (Continued)
Single Row
Without Solder Clips
.022 Dia.
[0.56] TYP.
Plated-Thru Hole
PC Board Hole Layouts
Note: Consult Tyco Electronics for
customer drawings detailing tolerances.
No. of
Pos.
4
5
6
8
10
12
13
15
3
Double Row
Without Solder Clips
Dimension
B
.150 [3.81]
.200 [5.08]
.250 [6.35]
.350 [8.89]
.450 [11.43]
.550 [13.97]
.600 [15.24]
.700 [17.78]
No. of
Pos.
17
20
22
25
30
31
36
40
50
Dimension
B
.800 [20.32]
.950 [24.13]
1.050 [26.67]
1.200 [30.48]
1.450 [36.83]
1.500 [38.10]
1.750 [44.45]
1.950 [49.53]
2.450 [62.23]
No. of
Pos.
36
40
44
50
60
68
72
80
100
Dimension
B
.850 [21.59]
.950 [24.13]
1.050 [26.67]
1.200 [30.48]
1.450 [36.83]
1.650 [41.91]
1.750 [44.45]
1.950 [49.53]
2.450 [62.23]
.022 Dia.
[0.56] TYP.
Plated-Thru
Hole
Note: Consult Tyco Electronics for
customer drawings detailing tolerances.
No. of
Pos.
8
10
12
14
16
20
24
26
30
34
Dimension
B
.150 [3.81]
.200 [5.08]
.250 [6.35]
.300 [7.62]
.350 [8.89]
.450 [11.43]
.550 [13.97]
.600 [15.24]
.700 [17.78]
.800 [20.32]
42
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Surface-Mount Connectors, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board
Product Facts
Surface-mount option for
parallel board-to-board
applications; completely
intermateable with
AMPMODU System 50
thru-hole board-to-board
and cable-to-board systems
■ Double row, vertical,
shrouded header and
receptacle assemblies
■ Available in select sizes
from 10 through 100
positions
■ High Density; contacts
spaced on .050 x .100 [1.27
x 2.54] centers; compact
footprint
■ Compatible with standard
surface-mount processes
■ Stand-offs for free drainage
of flux cleaning solutions;
visible solder joints for easy
inspection
■ Simple, low insertion-force
holddown for process
retention and long-term
strain relief for solder joints
■ Available in tape and reel
packaging (with vacuum
covers) for automatic
placement.
■
Board-to-Board Connectors,
Surface-Mount
3
The high-density surfacemount connector is another
mounting option in the
AMPMODU System 50
connector family.
This surface-mount system
is fully intermateable with
the AMPMODU System 50
thru-hole and cable-toboard connectors.
Additionally, the design of
the mating interface has not
been changed, maintaining
the same high reliability as
the thru-hole product.
The surface-mount system
includes double row,
vertical, shrouded header
and receptacle assemblies
in select sizes from 10
through 100 positions. It
meets the tight dimensional
requirements of surfacemount technology. The
simple, low insertion-force
holddown provides both
processing retention and
long-term strain relief for
the solder joints in the
headers and receptacles.
43
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Surface-Mount Headers, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board
Double Row, Vertical
.045 Ref.
[1.14]
.125
[3.18]
.344 [8.74]
.284
[7.21]
.100
[2.54]
Headers
.050
[1.27] Typ.
.031±.010
[.79±.25]
A±.003
[.08]
.057±.010
[1.45±.25]
Material and Finish
Housing — Glass-filled thermoplastic,
black, 94V-0 rated
Contacts — Copper alloy; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder tail, with entire contact underplated .000050 [0.00127] nickel
Holddown — Copper alloy, plated
.000150 [0.00381] tin over .000050
[0.00127] nickel
3
.435±.007
[11.05±.18]
Detail A
.053±.006
[1.35±0.15]
.042±.003
[1.07± 0.08] Dia. Typ.
(Plated-Thru Hole)
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 40,
45, 51, 52, & 56
Board-to-Board Spacing — page 63
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25035
Holes for holddowns are not
required for parts packaged
in tape and reel.
Recommended PC Board Layout
No. of
Pos.
A
B
Dimensions
C
D
E
10
12
20
24
30
40
50
60
80
100
.380 [9.65]
.430 [10.92]
.630 [16.00]
.730 [18.54]
.880 [22.35]
1.130 [28.70]
1.380 [35.05]
1.630 [41.40]
2.130 [54.10]
2.630 [66.80]
.200 [5.08]
.250 [6.35]
.450 [11.43]
.550 [13.97]
.700 [17.78]
.950 [24.13]
1.200 [30.48]
1.450 [36.83]
1.950 [49.53]
2.450 [62.23]
—
—
.150 [3.81]
.200 [5.08]
.275 [6.99]
.400 [10.16]
.525 [13.34]
.650 [16.51]
.900 [22.86]
1.150 [29.21]
.025 [0.64]
—
.150 [3.81]
.200 [5.08]
.275 [6.99]
.400 [10.16]
.525 [13.34]
.650 [16.51]
.900 [22.86]
1.150 [29.21]
—
—
—
—
—
—
.025 [0.64]
.000
.000
.000
Part Numbers
Pkg in
Pkg in
Tube
Tape & Reel*
5-104549-1
5-147377-1
6-104549-1
—
5-104549-2
5-147377-2
5-104549-3
5-147377-9
5-104549-5
5-147377-3
5-104549-6
5-147377-4
5-104549-7
5-147377-5
5-104549-8
5-147377-6
5-104549-9
5-147377-7
6-104549-0
5-147377-8
*Parts packaged in tape and reel are without hold downs and include a vacuum pick and place cover
Note: All part numbers are RoHS compliant.
44
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Surface-Mount Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Board-to-Board
Double Row, Vertical
.025 Ref.
[0.64]
.198±.002 [5.03±.05]
.100
[2.54]
.125±.008
[3.18±0.20]
2 Plc.
Receptacles,
Surface Mount
A
Material and Finish
Housing — Glass-filled thermpolastic,
black, 94V-0 rated
Contacts — Phosphor bronze; duplex
plated .000030 [0.00076] gold in
mating area, .000150 [0.00381] tin
on solder tail, with entire contact
underplated .000050 [0.00127] nickel
Holddown — Copper alloy; duplex
plated .000150 [0.00381] tin over
.000050 [0.00127] nickel
.370±.003
[9.40±0.08]
3
.053±.006
[1.35±0.15]
.050
[1.27]
.065±.001 Dia. Typ. (Pad)
[1.65±0.03]
Related Product Data
Performance Characteristics —
page 63
Mateable Connectors — pages 29,
30, 34, 35 & 44
Board-to-Board Spacing — page 63
Holes for holddowns are not
required for parts packaged
in tape and reel.
.285 Ref.
[7.24]
.042±.003 Dia.Typ.
[1.07±0.08] (Plated-Thru hole)
Technical Documents — page 64
Product Specification 108-1093
Application Specification
114-25035
Recommended PC Board Layout
No. of
Pos.
10
20
24
30
40
50
60
80
100
A
.294 [7.47]
.544 [13.82]
.644 [16.36]
.794 [20.17]
1.044 [26.52]
1.294 [32.87]
1.544 [39.22]
2.044 [51.92]
2.544 [64.62]
Dimensions
B
.200 [5.08]
.450 [11.43]
.550 [13.97]
.700 [17.78]
.950 [24.13]
1.200 [30.48]
1.450 [36.83]
1.950 [49.53]
2.450 [62.23]
C
.400 [10.16]
.650 [16.51]
.750 [19.05]
.900 [22.86]
1.150 [29.21]
1.400 [35.56]
1.650 [41.91]
2.150 [54.61]
2.650 [67.31]
Part Numbers
Pkg in Tube Pkg in Tape & Reel*
5-104550-1
5-147378-1
5-104550-2
5-147378-2
5-104550-3
5-147378-9
5-104550-4
5-147378-3
5-104550-5
5-147378-4
5-104550-6
5-147378-5
5-104550-7
5-147378-6
5-104550-8
5-147378-7
5-104550-9
5-147378-8
*Parts packaged in tape and reel are without hold downs and include a vacuum pick and place cover
Note: All part numbers are RoHS compliant.
45
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Cable-to-Board Connectors, .050 x .100 [1.27 x 2.54] Centerline
FFC Cable
Cable-to-Board Connectors,
FFC Cable
Product Facts
■
Signal application only,
1.5 amperes maximum
single circuit
■
Single or double row
connectors
■
Terminates flexible flat
conductor cable and flexible
etched circuitry
■
Shielded cable provides for
customizing
■
Center latch housing
providing positive latching
3
The cable-to-board .050
[1.27] center FFC
receptacle connectors are
part of the AMPMODU
System 50 family for
terminating flexible flat
conductor cable and
flexible etched circuitry.
The FFC receptacle uses a
dual beam contact with 30
microinches of gold plating.
The FFC receptacle
connectors have an integral
latch for positive locking to
shrouded mating headers.
Flexible flat conductor cable
is a planar parallel
conductor cable. It can be
used as a one-to-one
connector or as a complex
harness, allowing split-outs
and special routing. The
cable is comprised of .026
[0.66] wide x .003 [0.08]
thick conductors made of
copper per QQ-C-502 and
insulated with a flame
retardant polyester film.
solder tab. Receptacle
contacts are made of
phosphor bronze with a
finish of plated gold duplex,
while the solder tab
contacts are finished in a
bright tin-lead overall.
The complete product line
provides solder tabs for
board mounting at low cost
and custom shielding of the
cable.
The FFC contacts are
available in receptacle and
46
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Cable-to-Board Connectors, .050 x .100 [1.27 x 2.54] Centerline
FFC Cable] (Continued)
Custom Designed
Cable Assemblies
Solder Tabs
Single Row
Receptacle
Housing
Double Row
Receptacle
Housing
Flexible Flat
Conductor Cable
Tyco Electronics can supply customized flexible flat
conductor cable assemblies using the components
shown on pages 48 thru 54.
Typical examples of these
cable assemblies are
shown to the right.
And, to meet the internal
shielding requirements of
today’s complex electronic
equipment, custom
designed shielded FFC
cable assemblies can be
made to your specific
specifications.
3
FFC Cable,
.050 [1.27]
Centerline
Solder Tabs
Single Row
Receptacle
Housing
FFC Cable,
.050 [1.27]
Centerline
47
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
FFC Contacts, .050 x .100 [1.27 x 2.54] Centerline
Receptacle
Solder Tab
D
.725
[18.42]
Receptacle Strip
C*
C*
FCC
Contacts
B
.0085
[0.22]
.016
[0.41]
Accepts .015 [0.38] Sq. Post
.125-.350 [3.18-8.89] Long
D
3
Solder Tab Strip
Material and Finish
.100 Typ.
[2.54]
Phosphor bronze; plated gold
duplex or bright tin-lead overall
(See chart.)
Related Product Data
Localized Plate Area 4
Performance Characteristics —
page 63
Housings — pages 49-52
Application Tooling — page 60-62
.211 Max.
[5.36]
.0085±.0005 Typ.
[0.216±0.013]
Technical Documents — page 64
Product Specification 108-16022
Application Specification
114-16008
Contacts
Type
Receptacle
Solder Tab
Contact Splice
Receptacle
Config.
Strip
Part No./
Finish
1-487547-11
B
—
Dimensions
C*
.520
[13.21]
.480
[12.19]
.480
[12.19]
.345
[8.76]
Strip
487923-42
Strip
487923-53
Strip
487940-42
.245
[6.22]
.245
[6.22]
.110
[2.79]
Strip
487941-44
—
—
—
.520
[13.21]
Strip
1-487547-25
D
.725
[18.42]
.685
[17.40]
.685
[17.40]
.550
[13.97]
.385
[9.78]
.725
[18.42]
Application Tooling
Part Numbers
Machine With
Machine
Programmer
224910-4
(120 V)
224910-6
(240 V)
318619-4
(120 V)
318619-6
(240 V)
1Duplex
plated .000030 [0.00076] gold on mating area, .000100 [0.00254] min. bright tin in crimp area, with entire contact underplated .000050 [0.00127] min. nickel.
2Plated .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel.
3Duplex plated .000015 [0.00038] gold on solder tab end, .000100 [0.00254] min. bright tin in crimp area, with entire
contact underplated .000050 [0.00127] min. nickel.
4Plated .000150 [3.81µm] min. bright tin over .000050 [1.27µm] min. nickel.
5Duplex Plated .000150 [0.00038] gold on mating area, .000100 [0.00254] min bright tin in crimp area, with entire contact underplated .000050 [0.00127] min. nickel.
*After cut-off from carrier strip.
Note: All part numbers are RoHS compliant.
48
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Single Row Receptacle Housings, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board
Plain Style Housings
.585
[14.86]
Plain Style Housings
Receptacle
Housings
B
.047
[1.19]
(2 Pls.)
3
Latch Style Housings
Typ
.050
[1.27] Typ.
Material and Finish
Housing — Black thermoplastic, flame
retardant, 94V-0 rated
.098
[2.49]
A
Related Product Data
Performance Characteristics —
page 63
Receptacle Contacts — page 48
Mateable Headers — pages 27, 28,
32 & 33
Latch Style Housings
Technical Documents — page 64
.585
[14.86]
Product Specification 108-16022
Application Specification
114-16008
B
.294
[7.47]
.047
[1.19]
(2 Pls.)
.275
[6.98]
Typ
.050
[1.27] Typ.
.098
[2.49]
A
49
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Single Row Receptacle Housings, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board (Continued)
No. of
Pos.
Receptacle
Housings
4
5
6
7
8
10
12
13
15
16
17
20
22
25
26
28
30
36
40
45
50
3
Dimensions
A
B
.150 [3.18]
.244 [6.20]
.200 [5.08]
.294 [7.47]
.250 [6.35]
.344 [8.74]
.300 [7.62]
.394 [10.01]
.350 [8.89]
.444 [11.28]
.450 [11.43]
.544 [13.82]
.550 [13.97]
.644 [16.36]
.600 [15.24]
.694 [17.63]
.700 [17.78]
.794 [20.17]
.750 [19.05]
.844 [21.44]
.800 [20.32]
.894 [22.71]
.950 [24.13] 1.044 [26.52]
1.050 [26.67] 1.144 [29.06]
1.200 [30.48] 1.294 [32.87]
1.250 [31.75] 1.343 [34.11]
1.350 [34.29] 1.443 [36.65]
1.450 [36.83] 1.544 [39.22]
1.750 [44.45] 1.844 [46.84]
1.950 [49.53] 2.044 [51.92]
2.200 [55.88] 2.294 [58.27]
2.450 [62.23] 2.544 [64.62]
Plain Receptacle Housing
487544-1
487544-2
487544-3
487544-4
487544-5
487544-7
487544-9
—
1-487544-2
1-487544-3
1-487544-4
1-487544-7
1-487544-9
2-487544-2
—
—
—
3-487544-3
—
—
4-487544-7
Part Numbers
Latch Style Receptacle Housing
487545-1
487545-2
487545-3
487545-4
487545-5
487545-7
487545-9
1-487545-0
1-487545-2
—
1-487545-4
1-487545-7
1-487545-9
2-487545-2
2-487545-3
2-487545-5
2-487545-7
3-487545-3
3-487545-7
4-487545-2
4-487545-7
Note: Other sizes of receptacle housings (plain and latch style) can be made available, consult Tyco Electronics.
Plain Housing,
Stacked End-to-End
(See Notes
1 & 2 below.)
Latch Style Housing
Plain Housings,
Stacked Side-to-Side
(See Note 1 below.)
Post Removed
AMPMODU System 50 Header, Shrouded
(Right-Angle Post shown
for ref. only.)
AMPMODU System 50 Header, Unshrouded
(Straight Post shown for ref. only.)
Notes: 1. Plain housings are side-to-side stackable on either straight or
right-angle posted, unshrouded AMPMODU System 50 headers.
Notes: 2. For end-to-end stacking, the posts located between the adjoining
housings must be removed to provide housing end clearance.
Typical Cable-to-Board Application
of Latch Style Receptacle Housing
Typical Cable-to-Board Application
of Plain Receptacle Housing
Note: All part numbers are RoHS compliant.
50
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Double Row Receptacle Housings, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board
Plain Style Housings
.585
[14.86]
Receptacle
Housings
Plain Style Housings
B
Plain
.047
[1.19]
(2 Plc.)
3
.198
[5.03]
.100
[2.54]
Typ
.050
[1.27] Typ.
Latch Style Housings
A
Material
Black thermoplastic, flame retardant,
94V-0 rated
Related Product Data
Performance Characteristics —
page 63
Receptacle Contacts — page 48
Mateable Headers — pages 29, 30,
34, 35, & 44
Latch Style Housings
Technical Documents — page 64
Product Specification 108-16022
Application Specification
114-16008
B
.585
[14.86]
.047
[1.19]
(2 Plc.)
.375
[9.53]
.198
[5.03]
.100
[2.54]
Typ
.050
[1.27] Typ.
Latch
A
51
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Double Row Receptacle Housings, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board (Continued)
Dimensions
A
B
.150 [3.81]
.247 [6.27]
.200 [5.08]
.297 [7.54]
.250 [6.35]
.374 [8.81]
.300 [7.62]
.397 [10.08]
.350 [.889]
.447 [11.35]
.450 [11.43]
.547 [13.89]
.550 [13.97]
.647 [16.43]
.600 [15.24]
.697 [17.7]
.700 [17.78]
.797 [20.24]
.800 [20.32]
.897 [22.78]
.950 [24.13]
1.047 [26.59]
1.050 [26.67]
1.147 [29.13]
1.200 [30.48]
1.297 [39.94]
1.450 [36.83]
1.547 [39.29]
1.750 [44.45]
1.847 [46.91]
1.950 [49.53]
2.047 [51.99]
2.450 [62.23]
2.547 [64.69]
No. of
Pos.
Receptacle
Housings
8
10
12
14
16
20
24
26
30
34
40
44
50
60
72
80
100
3
Plain Housing
Part Numbers
Latch Style Housing
Part Numbers
487938-8
1-487938-0
1-487938-2
1-487938-4
1-487938-6
2-487938-0
2-487938-4
2-487938-6
3-487938-0
3-487938-4
4-487938-0
4-487938-4
5-487938-0
—
7-487938-2
8-487938-0
487938-1
487937-8
1-487937-0
1-487937-2
1-487937-4
1-487937-6
2-487937-0
2-487937-4
2-487937-6
3-487937-0
3-487937-4
4-487937-0
4-487937-4
5-487937-0
6-487937-0
7-487937-2
8-487937-0
487937-1
Note: Other sizes of receptacle housings, up to 120 positions, can be made available, consult Tyco Electronics.
Plain Housing,
Stacked End-to-End
(See Notes 1 & 2 below.)
Latch Style Housing (Shown)
Post Removed
AMPMODU System 50 Header, Unshrouded
(Straight Post shown for ref. only.)
AMPMODU System 50 Header,
Shrouded (Right-Angle Post
shown for ref. only.)
Notes: 1. Plain housings are end-to-end stackable on either straight or
right-angle posted, unshrouded AMPMODU System 50 headers.
Notes: 2. For end-to-end stacking, the two posts located between the adjoining
housings must be removed to provide housing end clearance.
Typical Cable-to-Board Application
of Plain Receptacle Housing
Typical Cable-to-Board Application
of Latch Style Receptacle Housing
Note: All part numbers are RoHS compliant.
52
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
ZIF-Line Connectors, .050 x .100 [1.27 x 2.54] Centerline, Cable-to-Board
Vertical Cable Entry
.040
[1.02]
Pos. 1
Identification
.020
[0.508]
.240
[6.10]
.240
[6.10]
.155
[3.94]
A
.310
[7.87]
Housing and Cover — Black
thermoplastic, flame retardant,
94V-0 rated
Contacts — Phosphor bronze, plated
.000150 [0.00381] min. bright tin over
.000050 [0.00127] min. nickel on entire
contact
Performance Characteristic
Contact Current Rating—
1 ampere†
Dia. Typ
.031±.003 Dia. Typ.
[0.79±0.08]
**
Dia. Typ
.050±.002* Dia. Typ.
[1.27±0.05]
Typ
.100
Pos. 1
[2.54] Typ.
.010
[0.25]
Typ
.050
[1.27] Typ.
.050
[1.27]
ZIF-Line
Connectors
Material and Finish
.100
[2.54]
.100±.002
[2.54±0.05]
3
Recommended Mounting Hole Pattern
.105
[2.67]
B
Note: ZIF-Line connector illustrated above with
cover in closed position.
**±.002 [±0.05] tolerance not to accumulate
within one mounting hole pattern.
**This mounting hole required for even-numbered
connector sizes only.
†1 ampere rating is for single circuit.
Multiple circuits, ambient temperature
and conductor size affect current
carrying capacity.
Related Product Data
FFC Cable (with Tin-Plated
Prepared Ends) —
Consult Tyco Electronics.
Typ
.210
[5.33] Min.
Technical Documents — page 64
FFC Cable or
Flexible Etched Circuitry
with Prepared Ends*
Product Specification 108-16025
Application Specification
114-16014
.004-.012
[0.102-0.305]
Thk.
ZIF-Line Connector
(Termination
Completed with
Cable Inserted and
Cover Closed)
ZIF-Line Connector
(Cover Open)
*FFC cable with tin-plated prepared ends can be made available, consult Tyco Electronics.
Note: Special preparation of cable is required, refer to Tyco Electronics Application Specification No. 114-16014.
Typical Flexible Flat Conductor Cable-to-Board Application
53
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
ZIF-Line
Connectors
ZIF-Line Connectors, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board (Continued)
3
Dimensions
No. of
Pos.
A
B
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
.470 [11.94]
.520 [13.21]
.570 [14.48]
.620 [15.75]
.670 [17.02]
.720 [18.29]
.770 [19.56]
.820 [20.83]
.870 [22.10]
.920 [23.37]
.970 [24.64]
1.020 [25.91]
1.070 [27.18]
1.120 [28.45]
1.170 [29.72]
1.220 [30.99]
1.270 [32.26]
1.320 [33.53]
1.370 [34.80]
1.420 [36.07]
1.470 [37.34]
1.520 [38.61]
1.570 [39.88]
1.620 [41.15]
1.670 [42.42]
1.720 [43.69]
.410 [10.41]
.460 [11.68]
.510 [12.95]
.560 [14.22]
.610 [15.49]
.660 [16.76]
.710 [18.03]
.760 [19.30]
.810 [20.57]
.860 [21.84]
.910 [23.11]
.960 [24.38]
1.010 [25.65]
1.060 [26.92]
1.110 [28.19]
1.160 [29.46]
1.210 [30.73]
1.260 [32.00]
1.310 [33.27]
1.360 [34.54]
1.410 [35.81]
1.460 [37.08]
1.510 [38.35]
1.560 [39.62]
1.610 [40.89]
1.660 [42.16]
Connector
Part
Numbers
5-487576-0
5-487576-1
4-487576-8
4-487576-9
487576-1
487576-2
487576-3
487576-4
487576-5
487576-6
487576-7
487576-8
487576-9
1-487576-0
1-487576-1
1-487576-2
1-487576-3
1-487576-4
1-487576-5
1-487576-6
1-487576-7
1-487576-8
1-487576-9
2-487576-0
2-487576-1
2-487576-2
Dimensions
No. of
Pos.
A
B
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
1.770 [44.96]
1.820 [46.23]
1.870 [47.50]
1.920 [48.77]
1.970 [50.04]
2.020 [51.31]
2.070 [52.58]
2.120 [53.85]
2.170 [55.12]
2.220 [56.39]
2.270 [57.66]
2.320 [58.93]
2.370 [60.20]
2.420 [61.47]
2.470 [62.74]
2.520 [64.01]
2.570 [65.28]
2.620 [66.55]
2.670 [67.82]
2.720 [69.09]
2.770 [70.36]
2.820 [71.63]
2.870 [72.90]
2.920 [74.17]
2.970 [75.44]
1.710 [43.43]
1.760 [44.70]
1.810 [45.97]
1.860 [47.24]
1.910 [48.51]
1.960 [49.78]
2.010 [51.05]
2.060 [52.32]
2.110 [53.59]
2.160 [54.86]
2.210 [56.13]
2.260 [57.40]
2.310 [58.67]
2.360 [59.94]
2.410 [61.21]
2.460 [62.48]
2.510 [63.75]
2.560 [65.02]
2.610 [66.29]
2.660 [67.56]
2.710 [68.83]
2.760 [70.10]
2.810 [71.37]
2.860 [72.64]
2.910 [73.91]
Connector
Part
Numbers
2-487576-3
2-487576-4
2-487576-5
2-487576-6
2-487576-7
2-487576-8
2-487576-9
3-487576-0
3-487576-1
3-487576-2
3-487576-3
3-487576-4
3-487576-5
3-487576-6
3-487576-7
3-487576-8
3-487576-9
4-487576-0
4-487576-1
4-487576-2
4-487576-3
4-487576-4
4-487576-5
4-487576-6
4-487576-7
Note: All part numbers are RoHS compliant.
54
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Cable-to-Board Connectors, .050 x .100 [1.27 x 2.54] Centerline,
Ribbon Cable, System 50
Product Facts
■
Preassembled housing
and cover
One step termination
■
End and daisy chain
termination
■
Positive end latching of
connector to shrouded
headers
■
Terminates 30 AWG
[0.05 mm2] solid or
stranded and
32 AWG [0.03 mm2]*
stranded .025 [0.64]
centerline ribbon cable
with PVC insulation
■
0.5 ampere current
rating (limited by cable)
Cable-to-Board Connectors,
Ribbon Cable
■
3
The AMP-LATCH System 50
Ribbon Cable connector
is a receptacle connector
that will terminate ribbon
cable on .025 [0.64]
centerlines. It is available
in select sizes from 10 to
100 positions and will
accommodate 30 AWG
[0.05 mm2] solid or stranded
and 32 AWG [0.03 mm2]
stranded conductors, with
PVC cable insulation.
The housing and cover
(black) have a 94V-0 rating.
A copper alloy single
mating beam contact
provides the interconnect
between the conductor
and the .015 [0.38] square
posts on the .050 x .100
[1.27 x 2.54] grid. The
contacts are plated with
30 gold duplex plating. The
latching feature is located
on the receptacle, not the
header, and saves board
space and eliminates future
problems of “latch height
compatibility.”
55
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Double Row Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board, Ribbon Cable, System 50
.254 .228
[6.45] [5.79]
A
Ribbon Cable
Receptacles
.054
[1.37]
Cover
B
C
Latch
.580
[14.73]
Before
Termination
Material and Finish
Housing — Black thermoplastic,
94V-0 rated
Latches — Stainless steel
Contacts — Copper alloy, plated gold
over nickel with tin in termination area
3
.430
[10.92]
.335
[8.51]
Contact
Related Product Data
.228
[5.80]
Housing
.102
[2.59]
E
Position #1
Indicator
.198
[5.03]
.100
[2.54]
.246
[6.25]
F
Performance Characteristics —
page 63
Mateable Headers — pages 29, 30,
34, 35 & 44
Application Tooling — page 60-62
Mates with Posts —
.015 [0.38] square, .125 [3.18] long,
on.050 x .100 [1.27 x 2.54] grid
.100
[2.54]
.050
Typ.
[1.27]
Technical Documents — page 64
Product Specification 108-1109
Application Specification
114-25029
D
Dimensions
Part
Numbers
No. of
Pos.
A
B
C
D
E
F
10
.510 [12.95]
.445 [11.30]
.225 [5.72]
.200 [5.08]
.096 [2.44]
.294 [7.47]
2-111196-5
14
.610 [15.49]
.545 [13.84]
.325 [8.26]
.300 [7.62]
.146 [3.71]
.394 [10.01]
2-111196-6
16
.660 [16.76]
.595 [15.11]
.375 [9.52]
.350 [8.89]
.171 [4.34]
.444 [11.28]
2-111196-7
20
.760 [19.30]
.695 [17.65]
.475 [12.07]
.450 [11.43]
.221 [5.61]
.544 [13.82]
1-111196-8
24
.860 [20.32]
.795 [20.19]
.575 [14.61]
.550 [13.97]
.271 [6.88]
.644 [16.36]
2-111196-8
26
.910 [23.11]
.845 [21.46]
.625 [15.88]
.600 [15.24]
.296 [7.52]
.694 [17.63]
2-111196-9
30
1.010 [25.65]
.945 [24.00]
.725 [18.42]
.700 [17.78]
.346 [8.79]
.794 [20.17]
1-111196-9
34
1.110 [28.19]
1.045 [26.54]
.825 [20.96]
.800 [20.32]
.396 [10.06]
.894 [22.71]
3-111196-0
40
1.260 [32.00]
1.195 [30.35]
.975 [34.54]
.950 [24.13]
.471 [11.96]
1.044 [26.52]
2-111196-0
44
1.360 [34.54]
1.295 [32.89]
1.075 [27.31]
1.050 [26.67]
.521 [13.23]
1.144 [29.06]
3-111196-1
50
1.510 [38.35]
1.445 [36.70]
1.225 [31.12]
1.200 [30.48]
.596 [15.14]
1.294 [32.87]
2-111196-1
60
1.760 [44.70]
1.695 [43.05]
1.475 [37.47]
1.450 [36.83]
.721 [18.31]
1.544 [39.22]
2-111196-2
64
1.860 [47.24]
1.795 [45.59]
1.575 [40.00]
1.550 [39.37]
.771 [19.58]
1.644 [41.76]
3-111196-2
68
1.960 [49.78]
1.895 [48.13]
1.675 [42.55]
1.650 [41.91]
.821 [20.85]
1.744 [44.30]
3-111196-4
72
2.060 [52.32]
1.995 [50.67]
1.775 [45.08]
1.750 [44.45]
.871 [22.12]
1.844 [46.84]
2-111196-3
80
2.260 [57.40]
2.195 [55.75]
1.975 [50.17]
1.950 [49.53]
.971 [24.66]
2.044 [51.92]
3-111196-3
100
2.760 [70.10]
2.695 [68.45]
2.475 [62.87]
2.450 [62.23]
1.221 [31.01]
2.544 [64.62]
2-111196-4
Note: All part numbers are RoHS compliant.
56
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Paddleboard Receptacles, .050 x .100 [1.27 x 2.54] Centerline,
Cable-to-Board, Ribbon Cable, System 50
.340
[8.64]
(Unterminated)
.050
[1.27]
.168
[4.27]
.100
[2.54]
.020
[0.51]
.008
[0.20]
Typ.
.075 Typ.
[1.91]
.304
[7.72]
.045
[1.19]
Ref.
Material and Finish
Housing — Black LCP thermoplastic,
94V-0 rated
Cover — Black polyester, 94V-0 rated
Contacts — Copper alloy, plated
.000100-.000200 [0.00245-0.00508]
bright tin over .000050-.000100
[0.00127-0.00254] nickel
A
.040
[1.02]
Paddleboard
Receptacles
.024 Typ. .050 Typ.
[1.27]
[0.61]
B
.030
Standoffs
[0.76]
(Various Locations)
.118
[3.00]
.273
[6.93]
(Terminated)
3
Related Product Data
Performance Characteristics —
page 63
Application Tooling — pages 60-62
Position 1
Indicator
B
.050
Typ.
[1.27]
Technical Documents — page 64
Product Specification 108-1109
Application Specification
114-25040
PCB Hole
Layout
10
14
16
20
24
26
28
30
34
40
1
1
2
2
2
1
2
1
1
2
.050
Typ.
[1.27]
.304
[7.72]
.075
Typ.
[1.91]
No. of
Pos.
B
.031
Typ.
[0.79]
.031
Typ.
[0.79]
.304
[7.72]
.075
Typ.
[1.91]
Recommended PC Board Layout 1
Dimensions
A
B
.436 [11.07]
.200 [5.08]
.536 [13.61]
.300 [7.62]
.586 [14.88]
.350 [8.89]
.686 [17.42]
.450 [11.43]
.786 [19.96]
.550 [13.97]
.836 [21.23]
.600 [15.24]
.886 [22.50]
.650 [16.51]
.936 [23.77]
.700 [17.78]
1.036 [26.31]
.800 [20.32]
1.186 [30.12]
.950 [24.13]
Part Numbers
No. of
Pos.
PCB Hole
Layout
5111595-1
5111595-2
5111595-3
5111595-4
5111595-5
5111595-6
2-5111595-0
5111595-7
5111595-8
5111595-9
44
46
50
60
64
68
72
80
100
2
1
1
2
2
2
2
2
2
Recommended PC Board Layout 2
Dimensions
A
B
1.286 [32.66]
1.050 [26.67]
1.336 [33.93]
1.100 [27.94]
1.436 [36.47]
1.200 [30.48]
1.686 [42.82]
1.450 [36.83]
1.786 [45.36]
1.550 [39.37]
1.886 [47.90]
1.650 [41.91]
1.986 [50.44]
1.750 [44.45]
2.186 [55.52]
1.950 [49.53]
2.686 [68.22]
2.450 [62.23]
Part Numbers
1-5111595-0
1-5111595-7
1-5111595-1
1-5111595-2
1-5111595-3
1-5111595-9
1-5111595-4
1-5111595-5
1-5111595-6
Note: All part numbers are RoHS compliant.
57
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Flat Ribbon Cable, PVC Insulation
30 AWG [0.05 mm2],
Solid Bare Copper
B
A
mm2]
30 AWG [0.05
Solid Bare Copper
Product Specifications
Flat Ribbon
Cable
Voltage —150 Volts
Impedance — 80 Ohms Nominal
(GND,SIG, GND, applies to 30AWG
Solid Bare Copper)
Capacitance — 19.2 pf/ft at
1 MHz nom.
Propagation Delay — 1.51 ns/ft nom.
Crosstalk —
10 ft sample 5 ns rise time:
Near End — 4.0% max.
Far End — 6.0% max.
UL Listing — STYLE 2678
3
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E53793
.0125
[0.318]
.006 [0.152] Minimum
Insulation Thickness
Temperature Rating — 20°C to +105°C
.025
[0.635]
Typ.
Dimensions
No. of
Conductors
A
B
16
20
24
26
28
30
34
36
40
44
50
60
68
72
80
100
.375 [9.52]
.475 [12.07]
.575 [14.61]
.625 [15.88]
.675 [17.14]
.725 [18.42]
.825 [20.95]
.875 [22.23]
.975 [24.77]
1.075 [27.31]
1.225 [27.94]
1.475 [37.47]
1.675 [42.55]
1.775 [45.09]
1.975 [50.17]
2.475 [62.87]
.400 [10.16]
.500 [12.70]
.600 [15.24]
.650 [16.51]
.700 [17.78]
.750 [19.05]
.850 [21.59]
.900 [22.86]
1.000 [25.40]
1.100 [27.94]
1.250 [31.75]
1.500 [38.10]
1.700 [43.18]
1.800 [45.72]
2.000 [50.80]
2.500 [63.50]
R
Certified by Canadian
Standards Association,
(CSA File No. LL83498)
.025
[0.635]
Red Edge Mark
for orientation
R
Insulation—Gray Flame
Retardant Flexible PVC
Flammability—UL: VW1
Part Numbers
Length Per Reel*
100 ft. [30.48 m] 500 ft. [152.4 m]
5-57013-1
5-57013-2
1-57013-3
57013-1
1-57013-4
57013-8
2-57013-5
2-57013-6
4-57013-6
4-57013-7
1-57013-5
57013-6
4-57013-9
5-57013-0
1-57013-6
57013-7
1-57013-7
57013-2
1-57013-8
57013-9
1-57013-9
1-57013-0
2-57013-0
57013-3
2-57013-1
1-57013-1
2-57013-2
1-57013-2
2-57013-3
57013-4
2-57013-4
57013-5
*Reel may contain separate lengths, 20 ft. [6.1 m] min. per length.
Electrical Characteristics of .025 [0.64] Centerline IDC Ribbon Cable
Base
Part No.
Insulation
AWG
Voltage
57013
219054, 219137
57119, 57139, 57145
PVC
TPE
FEP
30 Solid
30 Solid
30 Solid
150 Vac
150 Vac
300 Vac
Impedance
Capacitance
Single Ended
Nominal
G-S-G
G-S-G
80 Ohms Nom
19.2 pf/ft
90+/- 6 Ohms
15.3 pf/ft
93 Ohms Nom
13.6 pf/ft
.160 mh/ft
.124 mh/ft
.120 mn/ft
Nominal
Prop.
Delay
1.51 ns/ft
1.382 ns/ft
1.34 ns/ft
57131
219055
57288, 57289, 57290
PVC
TPE
FEP
30 Stranded
30 Stranded
30 Stranded
150 VAC
150 VAC
300 Vac
66 Ohms Nom
78 Ohms Nom
85 Ohms Nom
23.0 pf/ft
19.4 pf/ft
15.4 pf/ft
.100 mh/ft
.118 mh/ft
.110 mh/ft
1.55 ns/ft
1.510 ns/fr
1.36 ns/ft
2.8% Max
1.37% Nom
2.5% Nom
4.5% Max
2.37% Nom
2.8% Nom
219253
TPE
31 Stranded
150 Vac
90+/- 6 Ohms
15.4 pf/ft
.125 mh/ft
1.527 ns/ft
1.97% Nom
2.51% Nom
57038
219138
57118, 57138, 57144
PVC
TPE
FEP
32 Stranded
32 Stranded
32 Stranded
150 Vac
150 Vac
300 Vac
80 Ohms Nom
104 Ohms Nom
105 Ohms Nom
19.2 pf/ft
12.8 pf/ft
13.0 pf/ft
.147 mh/ft
.138 mh/ft
.120 mh/ft
1.51 ns/ft
1.664 ns/ft
1.36 ns/ft
4.0% Max
2.10% Nom
2.6% Nom
6.0% Max
2.57% Nom
2.8% Nom
Inductance
Nominal
NEXT
FEXT
10 Ft
10 Ft
5ns Rise Time 5ns Rise Time
4.0% Max
6.0% Max
2.39% Nom
2.99% Nom
2.6% Nom
2.8% Nom
Note: All part numbers are RoHS compliant.
58
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Centerline IDC Ribbon Cable, PVC Insulation
30 AWG 7/38 Stranded
Tinned Copper
B
For use with:
AMP-LATCH System 50,
AMPLIMITE .050 Series and
AMPMODU System 50
Connectors
Compatible with:
AMP R-CAM Ribbon Cable
Assembly Machine
.027 [0.686]
.0125 [0.318]
.006 [0.152] Minimum
Insulation Thickness
Voltage Rating — 150 Volts
Impedance — 66 ohms (GND, SIG,
GND)
Capacitance — 23 pf/ft. at
1 KHz
Propagation Delay —
1.55 ns/ft. [5.6 ns/m]
Crosstalk —
10 Ft. sample 5 ns rise time
Near End — 2.8% max
Near End — 4.5% max
UL AWM Style 2678
Certified
Flat Ribbon
Cable
Product Specifications
R
Edge
Mark
A
30 AWG 7/38
Stranded
Tinned Copper
PVC Insulation
.025 TYP
[0.635]
Dimensions
No. of
Conductors
A
B
20
40
50
68
80
100
.475 [12.07]
.975 [24.77]
1.225 [31.12]
1.675 [42.55]
1.975 [50.17]
2.475 [62.87]
.500 [12.70]
1.000 [25.40]
1.250 [31.75]
1.700 [43.18]
2.000 [50.80]
2.500 [63.50]
Part Numbers
Length Per Reel
100 ft. [30.5 m]
500 ft. [152.4 m]
1-57131-3
57131-1
1-57131-7
57131-2
1-57131-9
1-57131-0
2-57131-1
1-57131-1
2-57131-3
57131-4
2-57131-4
57131-5
3
R
Note: All part numbers are RoHS compliant.
59
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Application Tooling for Flexible Film Contacts
Flexible Film Termination Machine
(Terminates Continuous Strip Contacts Sequentially)
Application Tooling
Hand Crimping
Tool Assemblies
(for repair purposes)
Part No. 90273-5—for .100 CL
Multi-Crimp Contacts (408-9564)
3
Extraction Tools for .100 CL
Contacts
Tool No. 91200-■
■ *— for Receptacle
Housings with Side Locking Lance
Slot (408-7916)
Tool No. 91047-■
■ *— for Receptacle
and Pin Housings with End Locking
Lance Slot (408-7384)
*Consult Tyco Electronics for
specific dash nos.
For tooling information, contact the
Technical Support Center:
1-800-522-6752.
The flexible film
semiautomatic bench
machine for terminating
.050 [1.27] and .100 [2.54]
centerline flexible flat
conductor cable (FFC),
flexible etched circuitry
(FEC), and flexible printed
wiring (FPW) with AMP FFC
reel-mounted contacts. For
each cable or circuitry, the
contacts are automatically
applied one-at-a-time in a
straight sequence. To skip
positions, an optional
programmer control box is
available. Crimp height is
easily adjustable in .0002
[.0051] increments.
Termination rates up to
200 contacts per minute.
Machine Part Numbers
Machine
With Programmer*
.100 [2.54] CL, Multi-Crimp, 120 V
224910-1
318619-1
.100 [2.54] CL, Multi-Crimp, 240 V
224910-2
318619-2
.100 [2.54] CL, ARINC, 120 V
224910-3
318619-3
.050 [1.27] CL, Multi-Crimp, 120 V
224910-4
318619-4
.050 [1.27] CL, Multi-Crimp, 240 V
224910-6
318619-6
*The Programmer Kit (Part No. 356484-1) may be purchased with a new
machine, or separately for adding onto an existing machine.
Description
Machine
Technical Documents
Specifications
Customer Manuals
409-5835 (Part Numbers 224910 and
318619)
409-5880 Programmer Kit (Part
Number 356484-1)
Width — 20.5 [520]
Depth — 27.5 [700]
Height — 18 [460] (with reel support)
Reel Size — 24 [610] (max.)
Weight — 100 lb. [45.4 kg]
Electrical Source —
120 VAC, 50/60 Hz, 7.0 A;
240 VAC, 50/60 Hz, 3.5 A
Note: All part numbers are RoHS compliant.
60
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Application Tooling for Compliant Pin Connectors
ASG Servo Electric Presses
for Compliant Pin
Connectors
Application Tooling
Tyco Electronics offers the
ASG line of servo electric
presses for the application
of compliant pin products.
Systems are available in a
wide range of pressing
forces, board size capabilities and automation levels
to meet almost any applications requirements. Each
system utilizes a servo electric motor with PC control.
Coupled with force and distance monitoring and control, the entire line provides
100% quality assurance in
real-time with SPC data collection capabilities.
Automatic set up and a
graphical operator interface
help provide intuitive operation to help reduce common
and costly operator errors.
3
Press Force Monitoring for Scrap Avoidance
Every Tyco Electronics ASG
servo press utilizes realtime force and distance
monitoring and control.
This allows the press to
identify an error and react
throughout the press stroke.
Common problems such as
PCB holes above\below
specification and sometimes bent pins can be
detected by monitoring both
minimum and maximum
force parameters. Common
operator error such as
improperly placed connectors, missing\incorrect connector or tooling can also
be found by monitoring premature or missing force
parameters. In each case,
the system can stop during
the press cycle to avoid
costly scrap and rework.
Product Line Overview
System Type
Force Capability
Board Size Capability
BMEP
Benchtop
Semi-Automatic Press
Up to 5 Tons
[44 kN]
Up to 18" x 24"
[460x610 mm]
MEP
Stand-Alone
Semi-Automatic Press
Up to 12 Tons
[107 kN]
Up to 30" x 36"
[760x915 mm]
AEP 6T
Stand-Alone
Automatic Press
Up to 6 Tons
[53 kN]
Up to 30" x 36"
[760x915 mm]
AEP 12T
Stand-Alone or
Inline Automatic Press
Up to 12 Tons
[107 kN]
Up to 36" x 48"
[915x1220 mm]
Please contact the Tyco Tooling Assistance Center at 1-800-722-1111 for help with choosing the correct press and tooling to meet your application needs.
See Catalog 1309329 for more information on this equipment.
Note: All part numbers are RoHS compliant.
61
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Application Tooling for Ribbon Cable Connectors
Application Tooling
These application tools are
designed for one-step
termination of ribbon cable
connectors to planar,
ground plane and
shielded/jacketed ribbon
cable on .025 [0.64]
centers. A complete set of
tooling consists of an Arbor
Tool (manual, Part No.
91085-2 or pneumatic,
Part No. 91112-3), a Base
Assembly, Part No.
768338-4 and a Connector
Specific Kit, Part No.
679167-1 (receptacle).
3
Pneumatic Auto-Cycle
Tool Part No. 91112-3
Manual Arbor Tool
Part No. 91085-2
Technical Documents
Instruction Sheets
408-7777 — Manual Arbor Frame
Assembly
408-6732 — Pneumatic Auto-Cycle
Assembly
408-9827 — Universal Base Assembly,
Arbor Tool
408-9872 — Connector Specific Kit
for Receptacle Connectors (.025 [0.64]
Centerline Cable)
408-9928 — Connector Specific Kit
for Paddleboard Connectors (.025 [0.64]
Centerline Cable)
Note: Tooling is available for other
manufacturers’ manual arbor tools.
For information contact the
Tyco Electronics Technical Support
Center: 1-800-522-6752
Note: All part numbers are RoHS compliant.
62
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Performance Specifications
Board-to-Board Spacing
for Thru-Hole and
Surface-Mount Connector
Combinations
Thru-Hole Receptacle–
Surface-Mount Header
(Single and Double Row,
Shrouded and Unshrouded)
(Double Row, Shrouded)
Surface-Mount Receptacle–
Thru-Hole Header
Surface-Mount Receptacle–
Surface-Mount Header
(Double Row, Shrouded and
Unshrouded)
(Double Row, Shrouded)
Performance Characteristics
Thru-Hole Receptacle–
Thru-Hole Header
3
Need more information?
Call the Technical Support Center: 1-800-522-6752.
The Technical Support Center is staffed with specialists
well versed in all Tyco Electronics products. The Center
can provide you with:
Technical Support
Catalogs
■ Technical Documents
■ Product Samples
■ Tyco Electronics Authorized Distributor Locations
■
■
Performance Specifications
Description
Size Range-Single Row
Double Row
Current Rating (per contact)
Dielectric Withstanding Voltage
Insulation Resistance
Durability (tested to)
Mating Force (per contact)
Unmating Force (per contact)
Operating Temperature
*With latches depressed.
Board-to-Board,
Thru-Hole
Headers and
Receptacles
4 thru 50
10 thru 100
1.0 amperes
500 VAC
5,000 Megohms
200 Cycles
5 oz. [1.38 N] Max.
0.8 oz. [0.22 N] Min.
-65°C to +105°C
Board-to-Board,
Surface-Mount,
Headers and
Receptacles
—
10 thru 100
1.0 amperes
500 VAC
5,000 Megohms
200 Cycles
5 oz. [1.38 N] Max.
0.8 oz. [0.22 N] Min.
-65°C to +105°C
Cable-to-Board,
.050 [1.27] Centerline
FFC Cable Receptacles
4 thru 50
8 thru 100
1.5 amperes
300 VAC
5,000 Megohms
200 Cycles
8 oz. [2.22 N] Max.
1.0 oz. [0.27 N] Min.
-55°C to +105°C
Cable-to-Board,
.025 [0.64] Centerline
Ribbon Cable
Receptacles
—
10 thru 100
0.5 amperes
200 VAC
5,000 Megohms
150 Cycles
4 oz. [1.11 N] Max.
*0.5 oz. [0.13 N] Min.
-65°C to +105°C
63
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
AMPMODU Interconnection System
Technical Documents
The following is a list of technical documents covering the application, performance and
maintenance of AMPMODU System 50 connectors.
Product Specifications describe technical performance characteristics and verification tests.
They are intended for the Design, Component and Quality Engineer.
108-1093—AMPMODU System 50 Interconnection System, Board-to-Board
108-1109—AMPLATCH System 50 Receptacle and Paddleboard Connector
Technical Documents
108-16022—Connector System, .050 [1.27] Centerline FFC Cable
108-16025—Connector, ZIF-Line 50
108-16029—Shielded Flexible Flat Conductor Cable
108-40002—Flexible Flat Conductor Cable
Application Specifications describe requirements for using the product in its intended application and/or crimping information. They are intended for the Packaging and Design
Engineer and the Machine Setup Person.
3
114-16008—Multiple Crimp Contact for .050 [1.27] Centerline FFC and FEC Cable
114-16014—AMP ZIF-Line 50 & 100 PCB Connectors
114-25029—AMPMODU System 50 Ribbon Cable Connectors
114-25031—AMPMODU System 50 Thru-Hole Connectors
114-25035—AMPMODU Surface-Mount Connectors
114-25040—AMPMODU System 50 Paddleboard Connectors
Instruction Sheets provide instructions for assembling or applying the product. They are
intended for the Manufacturing Assembler or Operator.
408-6732—Pneumatic Arbor Tool, Part Number 91112-3 (Auto-Cycle)
408-7384—Extraction Tool, Part Number 91047
408-7763—Pneumatic Arbor Tool, Part Number 91112-2
408-7777—Manual Arbor Tool, Part Number 91085-2
408-7916—Extraction Tool, Part Number 91200
408-9827—Universal Base Assembly, Arbor Tool, Part Number 768338-1
408-9872—Connector Specific Kit, Part Number 679167-1, AMPMODU System 50
Receptacle Connectors (.025 [0.64] Centerline Cable)
408-9928—Connector Specific Kit, Part Number 679176-1, AMPMODU System 50
Paddleboard Connectors (.025 [0.64] Centerline Cable)
408-9564—Hand Crimping Tool Assembly, Part Number 90273-5
408-9719—FFC Contact Positioning Hand Tool Kit, Part Number 91292-1
Note: All part numbers are RoHS compliant.
64
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
AMPMODU 2mm Connectors (Board to Board)
Product Facts
2.0 x 2.0 [.08 x .08]
centerline spacing
■
Two-piece, double-row
connector system
■
Unshrouded header styles
include; breakaway and
surface-mount
■
All headers with 0.5 [.02]
square posted contacts
■
Surface-mount connectors
compatible with standard
surface-mount processing
(VPR, IR)
■
Closed top-entry
receptacle assemblies
include; vertical
mount and right-angle
■
Receptacle contacts
employ dual cantilever
beams for two-point
electrical stability
■
Duplex (gold/tin-lead)
plated posted contacts
and receptacle contacts
■
Thermoplastic housing
material, UL 94V-0 rated
■
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
AMPMODU 2mm connectors
reliably and economically
meet the packaging and
inter-connection
requirements of today’s
miniature sophisticated
electronics. They are ideal
for mobile and portable
personal computers and disk
drive applications. In today’s
marketplace, 2mm is
expanding over many other
industry segments due to
space constraints.
R
■
■
Certified by Canadian
Standards
Association,
File No. LR7189
R
Produced under a Quality
Management System
certified to ISO 9001
A copy of the
certificate is available
upon request.
ISO900e1d
i
rtif
Ce
AMPMODU 2mm Connectors
(Board-to-Board)
■
This versatile doublerow connector system is
comprised of various
straight and right-angle
posted headers for
thru-hole and surface
mounting and several
closed top-entry
receptacle assemblies
for vertical and horizontal
mounting. Headers and
receptacle assemblies are
available in selected sizes
ranging from 4 through
80 positions.
4
Thru-hole breakaway
headers feature brass
straight or right-angle
posts with a post length of
4.0 [.16] and a lead length
of 2.6 [.10].
The receptacle assemblies
employ phosphor bronze
contacts with dual cantilever beams and built-in
anti-overstress. This feature,
coupled with duplex
(gold/tin-lead) plating of
the header posts and
receptacle contacts,
provide superior electrical
performance as well as
excellent solderability.
65
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Headers, Unshrouded, Double Row, Thru-Hole, Vertical Mount
B
0.5 [.02] Square
Straight Posts
2.00±0.15
[.079±.006] TYP
2.00
[.079] TYP
4.00±0.15
[.157±.006]
Material and Finish
Breakaway Headers, Unshrouded,
Double Row, Thru-Hole Mount
Housing — Black thermoplastic,
UL 94V-O Rated
Posted Contacts — Copper alloy,
duplex plated as follows:
0.00020 [.000008] min. gold on contact
area, 0.00254 [.000100] min. tin on
solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
0.80
[.031] DIA TYP
±0.50
A
[±0.02]
B
±0.10
[±.004]
Recommended Solder Pad Layout
2.00±0.15
[.079±.006]
2.00±0.15
[.079±.006]
1.50±0.15
[.059±.006]
4.00±0.15
[.157±.006]
Related Product Data
Mateable Receptacles —
pages 80-84
Product Specification
108-57197
0.50±0.02
[.02±.001] DIA TYP
Packaging Method — Loose piece,
bag
Position
4
Note: All part numbers are RoHS
compliant.
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
2.60±0.02
[.102±.001]
Part Numbers
Reflow
Dimensions
A
B
4.0 [.16]
6.0 [.24]
8.0 [.32]
10.0 [.39]
12.0 [.47]
14.0 [.55]
16.0 [.63]
18.0 [.71]
20.0 [.79]
22.0 [.87]
24.0 [.94]
26.0 [1.02]
28.0 [1.10]
30.0 [1.18]
32.0 [1.26]
34.0 [1.34]
36.0 [1.42]
38.0 [1.50]
40.0 [1.57]
42.0 [1.65]
44.0 [1.73]
46.0 [1.81]
48.0 [1.89]
50.0 [1.97]
52.0 [2.05]
54.0 [2.13]
56.0 [2.20]
58.0 [2.28]
60.0 [2.36]
62.0 [2.44]
64.0 [2.52]
66.0 [2.60]
68.0 [2.68]
70.0 [2.76]
72.0 [2.83]
74.0 [2.91]
76.0 [2.99]
78.0 [3.07]
80.0 [3.15]
2.0 [.08]
4.0 [.16]
6.0 [.24]
8.0 [.32]
10.0 [.39]
12.0 [.47]
14.0 [.55]
16.0 [.63]
18.0 [.71]
20.0 [.79]
22.0 [.87]
24.0 [.94]
26.0 [1.02]
28.0 [1.10]
30.0 [1.18]
32.0 [1.26]
34.0 [1.34]
36.0 [1.42]
38.0 [1.50]
40.0 [1.57]
42.0 [1.65]
44.0 [1.73]
46.0 [1.81]
48.0 [1.89]
50.0 [1.97]
52.0 [2.05]
54.0 [2.13]
56.0 [2.20]
58.0 [2.28]
60.0 [2.36]
62.0 [2.44]
64.0 [2.52]
66.0 [2.60]
68.0 [2.68]
70.0 [2.76]
72.0 [2.83]
74.0 [2.91]
76.0 [2.99]
78.0 [3.07]
240°C
1470213-4
1470213-6
1470213-8
1-1470213-0
1-1470213-2
1-1470213-4
1-1470213-6
1-1470213-8
2-1470213-0
2-1470213-2
2-1470213-4
2-1470213-6
2-1470213-8
3-1470213-0
3-1470213-2
3-1470213-4
3-1470213-6
3-1470213-8
4-1470213-0
4-1470213-2
4-1470213-4
4-1470213-6
4-1470213-8
5-1470213-0
5-1470213-2
5-1470213-4
5-1470213-6
5-1470213-8
6-1470213-0
6-1470213-2
6-1470213-4
6-1470213-6
6-1470213-8
7-1470213-0
7-1470213-2
7-1470213-4
7-1470213-6
7-1470213-8
8-1470213-0
265°C
1734508-4
1734508-6
1734508-8
1-1734508-0
1-1734508-2
1-1734508-4
1-1734508-6
1-1734508-8
2-1734508-0
2-1734508-2
2-1734508-4
2-1734508-6
2-1734508-8
3-1734508-0
3-1734508-2
3-1734508-4
3-1734508-6
3-1734508-8
4-1734508-0
4-1734508-2
4-1734508-4
4-1734508-6
4-1734508-8
5-1734508-0
5-1734508-2
5-1734508-4
5-1734508-6
5-1734508-8
6-1734508-0
6-1734508-2
6-1734508-4
6-1734508-6
6-1734508-8
7-1734508-0
7-1734508-2
7-1734508-4
7-1734508-6
7-1734508-8
8-1734508-0
66
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Headers, Unshrouded, Double Row, Thru-Hole, Right-Angle Mount
0.5 [.02] Square
Straight Posts
B
2.00
[.079]
TYP
4.00±0.15
[.157±.006]
2.00±0.15
[.079±.006]
TYP
Material and Finish
Housing — Black thermoplastic,
UL 94V-O Rated, 265°C Process Capable
Posted Contacts — Copper alloy,
duplex plated as follows:
0.00020 [.000008] min. gold on contact
area, 0.00254 [.000100] min. tin on
solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
0.80
[.031] DIA TYP
2.60±0.02
[.102±.001]
Recommended Solder Pad Layout
A
2.00±0.15
[.079±.006]
±0.50
[±0.02]
B
±0.10
[±.004]
2.00±0.15
[.079±.006]
4.00±0.20
[.157±.008]
1.75±0.15
[.069±.006]
1.50±0.15
[.059±.006]
Related Product Data
Product Specification
108-57197
0.50±0.02
[.02±.001] DIA TYP
Packaging Method — Loose piece,
bag
Note: All part numbers are RoHS
compliant.
Position
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
2.00±0.20
[.079±.008]
Dimensions
A
4.0 [0.16]
6.0 [0.24]
8.0 [0.31]
10.0 [0.39]
12.0 [0.47]
14.0 [0.55]
16.0 [0.63]
18.0 [0.71]
20.0 [0.79]
22.0 [0.87]
24.0 [0.94]
26.0 [1.02]
28.0 [1.10]
30.0 [1.18]
32.0 [1.26]
34.0 [1.34]
36.0 [1.42]
38.0 [1.50]
40.0 [1.57]
42.0 [1.65]
44.0 [1.73]
46.0 [1.81]
48.0 [1.89]
50.0 [1.97]
52.0 [2.05]
54.0 [2.13]
56.0 [2.20]
58.0 [2.28]
60.0 [2.36]
62.0 [2.44]
64.0 [2.52]
66.0 [2.60]
68.0 [2.68]
70.0 [2.76]
72.0 [2.83]
74.0 [2.91]
76.0 [2.99]
78.0 [3.07]
80.0 [3.15]
AMPMODU .025 Square
Interconnection System
Mateable Receptacles —
pages 80-84
B
2.0 [0.08]
4.0 [0.16]
6.0 [0.24]
8.0 [0.31]
10.0 [0.39]
12.0 [0.47]
14.0 [0.55]
16.0 [0.63]
18.0 [0.71]
20.0 [0.79]
22.0 [0.87]
24.0 [0.94]
26.0 [1.02]
28.0 [1.10]
30.0 [1.18]
32.0 [1.26]
34.0 [1.34]
36.0 [1.42]
38.0 [1.50]
40.0 [1.57]
42.0 [1.65]
44.0 [1.73]
46.0 [1.81]
48.0 [1.89]
50.0 [1.97]
52.0 [2.05]
54.0 [2.13]
56.0 [2.20]
58.0 [2.28]
60.0 [2.36]
62.0 [2.44]
64.0 [2.52]
66.0 [2.60]
68.0 [2.68]
70.0 [2.76]
72.0 [2.83]
74.0 [2.91]
76.0 [2.99]
78.0 [3.07]
Part Numbers
1734507-4
1734507-6
1734507-8
1-1734507-0
1-1734507-2
1-1734507-4
1-1734507-6
1-1734507-8
2-1734507-0
2-1734507-2
2-1734507-4
2-1734507-6
2-1734507-8
3-1734507-0
3-1734507-2
3-1734507-4
3-1734507-6
3-1734507-8
4-1734507-0
4-1734507-2
4-1734507-4
4-1734507-6
4-1734507-8
5-1734507-0
5-1734507-2
5-1734507-4
5-1734507-6
5-1734507-8
6-1734507-0
6-1734507-2
6-1734507-4
6-1734507-6
6-1734507-8
7-1734507-0
7-1734507-2
7-1734507-4
7-1734507-6
7-1734507-8
8-1734507-0
4
67
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Breakaway Headers, Unshrouded, Double Row, Thru-Hole,
Right-Angle Mount
0.5 [.02] Square
Right-Angle Posts
TYP
TYP
TYP
Material and Finish
Breakaway Headers, Unshrouded,
Double Row, Thru-Hole Mount
Housing — Black thermoplastic,
UL 94V-0 rated
Posted Contacts — Brass, duplex
plated as follows:
A — 0.00020 [.000008] min. gold on
contact area, 0.00100 [.000039] min.
tin on solder area, with entire contact
underplated 0.00130 [.000051] min.
nickel
B — 0.00076 [.000030] min. gold on
contact area, 0.00100 [.000039] min.
tin on solder area, with entire contact
underplated 0.00130 [.000051] min.
nickel
0.5
[.02] TYP
L
Tin-Lead
Plated
Area
DIA TYP
0.5
[.02] DIA TYP
Related Product Data
Mateable Receptacles —
pages 80-84
Product Specification
108-5296
4
Packaging Method — Loose piece,
bag
2.0±0.08*
[.08±.003]
Typ.
TYP
DIA TYP
Recommended PC Board Hole Layout
DIA TYP
* Hole centerline to be 2.0±0.08 [.08±.003]; tolerances
not to accumulate within one connector pattern.
No.
of
Positions
4
6
8
10
12
14
16
18
20
22
26
30
32
34
36
38
40
42
44
46
48
50
Dimensions
A
4.0 [0.16]
6.0 [0.24]
8.0 [0.31]
10.0 [0.39]
12.0 [0.47]
14.0 [0.55]
16.0 [0.63]
18.0 [0.71]
20.0 [0.79]
22.0 [0.87]
26.0 [1.02]
30.0 [1.18]
32.0 [1.26]
34.0 [1.34]
36.0 [1.42]
38.0 [1.50]
40.0 [1.57]
42.0 [1.65]
44.0 [1.73]
46.0 [1.81]
48.0 [1.89]
50.0 [1.97]
B
2.0 [0.08]
4.0 [0.16]
6.0 [0.24]
8.0 [0.31]
10.0 [0.39]
12.0 [0.47]
14.0 [0.55]
16.0 [0.63]
18.0 [0.71]
20.0 [0.79]
24.0 [0.94]
28.0 [1.10]
30.0 [1.18]
32.0 [1.26]
34.0 [1.34]
36.0 [1.42]
38.0 [1.50]
40.0 [1.57]
42.0 [1.65]
44.0 [1.73]
46.0 [1.81]
48.0 [1.89]
Contact Plating
Lead Length L = 2.6[.10]**
A
B
5176837-1
2-5176837-5
5176837-2
2-5176837-6
5176837-3
—
5176837-4
—
5176837-5
—
5176837-6
3-5176837-0
5176837-7
—
—
3-5176837-2
—
3-5176837-3
—
3-5176837-4
1-5176837-2
—
1-5176837-4
—
1-5176837-5
3-5176837-9
—
4-5176837-0
—
4-5176837-1
1-5176837-8
4-5176837-2
1-5176837-9
5-5176837-2
2-5176837-0
4-5176837-4
2-5176837-1
—
2-5176837-2
4-5176837-6
2-5176837-3
4-5176837-7
2-5176837-4
4-5176837-8
68
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Breakaway Headers, Unshrouded, Double Row, Thru-Hole,
Vertical Mount
0.5 [.02] Square
Straight Posts
Material and Finish
Breakaway Headers, Unshrouded,
Double Row, Thru-Hole Mount
Housing — Black thermoplastic,
UL 94V-0 rated
Posted Contacts — Brass, duplex
plated as follows:
Plating A — 0.00020 [.000008] min.
gold on contact area, 0.00100 [.000039]
min. tin on solder area, with entire
contact underplated 0.00130 [.000051]
min. nickel
Plating B — 0.00076 [.000030] min.
gold on contact area, 0.00100 [.000039]
min. tin on solder area, with entire
contact underplated 0.00130 [.000051]
min. nickel
0.5
Typ.
[.02]
0.5
Dia. Typ.
[.02]
4.0
[.16]
Related Product Data
Mateable Receptacles —
pages 80-84
Product Specification
108-5296
Packaging Method — Loose piece,
bag
Dia. Typ.
4
L
Tin Plated
Area
2.0 ± 0.08*
[.08 ± .003]
Typ.
Recommended PC Board Hole Layout
* Hole centerline to be 2.0±0.08 [.08±.003]; tolerances
not to accumulate within one connector pattern.
69
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Breakaway Headers, Unshrouded, Double Row, Thru-Hole,
Vertical Mount (Continued)
Breakaway Headers, Unshrouded,
Double Row, Thru-Hole Mount
0.5 [.02] Square
Straight Posts
4
No.
of
Positions
A
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
4.0 [0.16]
6.0 [0.24]
8.0 [0.31]
10.0 [0.39]
12.0 [0.47]
14.0 [0.55]
16.0 [0.63]
18.0 [0.71]
20.0 [0.79]
22.0 [0.87]
24.0 [0.94]
26.0 [1.02]
28.0 [1.10]
30.0 [1.18]
32.0 [1.26]
34.0 [1.34]
36.0 [1.42]
38.0 [1.50]
40.0 [1.57]
42.0 [1.65]
44.0 [1.73]
46.0 [1.81]
48.0 [1.89]
50.0 [1.97]
Contact Plating
Dimensions
Lead Length L = 1.5 [.06]
B
2.0 [0.08]
4.0 [0.16]
6.0 [0.24]
8.0 [0.31]
10.0 [0.39]
12.0 [0.47]
14.0 [0.55]
16.0 [0.63]
18.0 [0.71]
20.0 [0.79]
22.0 [0.87]
24.0 [0.94]
26.0 [1.02]
28.0 [1.10]
30.0 [1.18]
32.0 [1.26]
34.0 [1.34]
36.0 [1.42]
38.0 [1.50]
40.0 [1.57]
42.0 [1.65]
44.0 [1.73]
46.0 [1.81]
48.0 [1.89]
Plating A
5178751-1
—
—
5178751-4
—
5178751-6
—
5178751-8
5178751-9
1-5178751-0
1-5178751-1
1-5178751-2
—
1-5178751-4
1-5178751-5
1-5178751-6
1-5178751-7
1-5178751-8
1-5178751-9
2-5178751-0
2-5178751-1
2-5178751-2
2-5178751-3
2-5178751-4
Plating B
2-5178751-5
2-5178751-6
2-5178751-7
2-5178751-8
2-5178751-9
3-5178751-0
3-5178751-1
3-5178751-2
3-5178751-3
3-5178751-4
3-5178751-5
3-5178751-6
3-5178751-7
3-5178751-8
3-5178751-9
4-5178751-0
4-5178751-1
4-5178751-2
4-5178751-3
4-5178751-4
4-5178751-5
4-5178751-6
4-5178751-7
4-5178751-8
Lead Length L = 2.6 [.10]
Plating A
5176264-1
5176264-2
5176264-3
5176264-4
5176264-5
5176264-6
5176264-7
5176264-8
5176264-9
1-5176264-0
1-5176264-1
—
1-5176264-3
1-5176264-4
1-5176264-5
—
3-5176264-2
3-5176264-3
3-5176264-4
—
3-5176264-6
—
—
3-5176264-9
Plating B
1-5176264-6
1-5176264-7
1-5176264-8
1-5176264-9
2-5176264-0
2-5176264-1
2-5176264-2
2-5176264-3
2-5176264-4
2-5176264-5
2-5176264-6
—
—
2-5176264-9
—
4-5176264-0
4-5176264-1
—
—
—
4-5176264-5
4-5176264-6
4-5176264-7
4-5176264-8
Note: All part numbers are RoHS compliant.
70
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Breakaway Headers, Unshrouded, Double Row, Surface Mount,
Vertical Mount
0.5 [.02] Square Straight
Posts
A
2.00
[.08] TYP
Material and Finish
Housing — Black polyphenylene
sulfide, UL 94V-0 rated
Posted Contacts — Phosphor bronze,
plated as follows, Duplex plated 0.00020
[.000008] min. gold on contact area,
0.00200 [.000079] min. tin on solder
area, with entire contact underplated
0.00130 [.000051] min. nickel
0.50±0.03
[.02±.002] TYP
B
1.00 [.04]
0.00
1.00 [.04]
±0.05
4.20 [.003]
[.17] -0.00
1.40 MAX
[.06] TYP
C
0.50±0.02
[.02±.001] TYP
0.10
[.004]
Mateable Receptacles —
pages 80-84
4.20±0.05
[.17±.003]
0.50±0.02
[.02±.001]
TYP
RO.50
REF
7.00±0.02
[.28±.001]
Product Specification
108-51001
Header Assembly, AMPMODU
2mm SMT Vertical
Related Product Data
Vacuum Cap
D±0.25
[.01]
1.50 [.06]
1.00 [.04]
Packaging Method — Tape & Reel
0.50±0.02
[.02±.001] TYP
Tin-Lead
Plating Area
4
2.60
[.10]
TYP
1.50
[.06] TYP
B±0.08 [.003]
Tolerances Non-Cumulative
1.00±0.08
[.04±.003] TYP
2.00
[.08]
2.00
[.08] TYP
Recommended Solder Pad Layout
No. of
Positions
4
6
12
16
A
4.0 [0.16]
6.0 [0.24]
12.0 [0.47]
16.0 [0.63]
Dimensions
B
2.0 [0.08]
4.0 [0.16]
10.0 [0.39]
14.0 [0.55]
C
4.0 [0.16]
6.0 [0.24]
5.0 [0.20]
8.0 [0.31]
Part
Numbers
5084476-1
5084476-2
5084476-7
5084476-3
Note: All part numbers are RoHS compliant.
71
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Breakaway Headers, Unshrouded, Double Row, Surface Mount,
Vertical Mount (Continued)
0.5 [.02] Square Straight
Posts
A
Material and Finish
3.8
[.150]
B
Housing — Black polyphenylene
sulfide, UL 94V-0 rated
Posted Contacts — Phosphor bronze,
plated as follows, Duplex plated 0.0076
[.000030] min. gold on contact area,
0.00254-0.00406 [.000100-.000160]
min. tin on solder area, with entire
contact underplated 0.00127 [.000050]
min. nickel
6.5±0.25
[.256±.010]
2.00
[.079] TYP
0.50
[.02]
TYP
AMPMODU .025 Square
Interconnection System
Related Product Data
Mateable Receptacles —
pages 80-84
4.5
[.177]
Product Specification
108-18544
Packaging Method — Tape & Reel
3.45
[.136]
0.9
[.035]
4
C
B±0.08 [.003]
Tolerances Non-Cumulative
1.00±0.08
[.04±.003] TYP
0.50
[.020] TYP
3.75
[.148]
TYP
2.00
[.08] TYP
Recommended Solder Pad Layout
No. of
Positions
4
6
8
10
12
14
16
18
20
22
24
A
4.0 [0.16]
6.0 [0.24]
8.0 [0.31]
10.0 [0.39]
12.0 [0.47]
14.0 [0.55]
16.0 [0.63]
18.0 [0.71]
20.0 [0.79]
22.0 [0.87]
24.0 [0.94]
Dimensions
B
2.0 [0.08]
4.0 [0.16]
6.0 [0.24]
8.0 [0.31]
10.0 [0.39]
12.0 [0.47]
14.0 [0.55]
16.0 [0.63]
18.0 [0.71]
20.0 [0.79]
22.0 [0.87]
C
7.60 [0.30]
9.60 [0.38]
11.60 [0.46]
13.60 [0.53]
15.60 [0.61]
17.60 [0.69]
19.60 [0.77]
21.60 [0.85]
23.60 [0.93]
25.60 [1.01]
27.60 [1.09]
Part
Numbers
966926-2
966926-3
966926-4
966926-5
966926-6
966926-7
966926-8
966926-9
1-966926-0
1-966926-1
1-966926-2
Note: All part numbers are RoHS compliant.
72
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Stacking Header, Unshrouded, Double Row, Thru-Hole,
Vertical Mount
0.5 [.02] Square Straight
Posts
0.5±0.03
[0.02±.001]
2.54
[.100]
12 Position
Part Number 1734770-1
Material and Finish
9.75
[.384]
Housing — Black thermoplastic,
UL 94 V-O Rated
Posted Contacts — Copper alloy,
duplex plated as follows:
Gold flash all over contact underplated
0.00127 [.000050] min. nickel
2.0
[.079]
2.0
[.079] TYP
10.0
[.039]
Mateable Receptacles —
pages 80-84
4.0
[.157]
2.0 Pitch Vertical
Related Product Data
2.0
[.079]
2.54
[.100]
12.0
[.047]
Product Specification
108-57331
Packaging Method — Loose piece,
bag
2.0
[.079] TYP
0.8±0.05
[0.31±.002] DIA
12 Places
2.0
[.079]
TYP
4
10.0
[.394]
Note: All part numbers are RoHS compliant.
73
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Headers, Shrouded, Double Row, Thru-Hole, Right-Angle Mount
0.5 [.02] Square Right-Angle
Posts
0.50
[.02] Ref.
6.65
[.262]
26 Position
Part Number 5084780-1
0.50±0.03
[0.02±.001]
3.60
[.142]
Material and Finish
2.0 Pitch Right-Angle
Housing — High temperature, black
thermoplastic, UL 94 V-O Rated
Posted Contacts — Copper alloy,
duplex plated as follows:
0.00038 [.000015] min. gold on contact
area, 0.00254 [.000100] min. tin on
solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
28.65
[1.128]
2.325
[.092] 2 Places
0.75
[.03] Ref.
+0.10
27.15 -0.05
[1.069] +.004
-.002
2.00 24.00
12 Spaces x [.079] = [.945]
2.00
[.079]
2.00
[.079]
6.30
[.248]
+0.01
1.40 -0.05
[.055] +.000
-.002
Related Product Data
Mateable Receptacles —
pages 80 and 84
4.80 +0.01/-0.22
[.189 +.004/-.009]
0.50 TYP at
[.079] Post Tips
3.60
[.142] TYP
2.54
[.100]
0.50±0.03
[0.02±.001]
TYP at
Post Tips
+0.51
2.99 -0.25
[.118] +.02
-.01
Soldertail
0.75
[.03]
6.40±0.20
[.252±.008]
0.50 TYP at
[.079] Post Tips
Product Specification
108-5296
2.00
[.079]
Packaging Method — Tube
4
4.10
[.161]
2.00±0.05
[.079±.002] TYP
Tolerance
2.00±0.05
[.079±.002] TYP Non-Cumulative
0.90±0.05
[.035±.002] TYP
Recommended PCB Layout
Note: All part numbers are RoHS compliant.
74
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Headers, Shrouded, Double Row, Thru-Hole, Right-Angle Mount
(Continued)
0.5 [.02] Square Right-Angle
Posts
C
± 0.20
[± .008]
A
± 0.10
[± .004]
± 0.20
B
[± .008]
2.00 ± 0.10
[.079 ± .004]
Material and Finish
Housing — Natural color thermoplastic,
UL 94 V-O Rated
Posted Contacts — Brass, plated as
follows:
0.00020 [.000008] min. gold on contact
area, with 0.00254 [.00010] tin on
soldertails, with entire contact
underplated 0.00127 [.000050] min.
nickel
2.00 ± 0.05
[.079 ± .002]
2.40
[.094]
5.60 ± 0.15
[.220 ± .006]
6.65 ± 0.20
[.262 ± .008]
3.60 ± 0.20
[.142 ± .008]
0.50 ± 0.02
Sq.
[.020 ± .001]
3.00 ± 0.20
[.118 ± .008]
Product Specification
108-57197
A
2.00 Typ.
[.079]
Packaging Method — Tubes
2.00 ± 0.10
[.079 ± .004]
2.00 Typ.
[.079]
2.0 Pitch Right-Angle
Related Product Data
Mateable Receptacles —
pages 80 and 84
5.50 ± 0.15
[.217 ± .006]
4.50 ± 0.15
[.177 ± .006]
Ø 0.80
[.031]
4
Recommended PCB Layout
No. of
Positions
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
Dimensions
A
6.0 [0.24]
8.0 [0.31]
10.0 [0.39]
12.0 [0.47]
14.0 [0.55]
16.0 [0.63]
18.0 [0.71]
20.0 [0.79]
22.0 [0.87]
24.0 [0.94]
26.0 [1.02]
28.0 [1.10]
30.0 [1.18]
32.0 [1.26]
34.0 [1.34]
36.0 [1.42]
38.0 [1.50]
40.0 [1.57]
42.0 [1.65]
44.0 [1.73]
46.0 [1.81]
48.0 [1.89]
50.0 [1.97]
52.0 [2.05]
54.0 [2.13]
56.0 [2.20]
58.0 [2.28]
60.0 [2.36]
62.0 [2.44]
B
8.85 [0.35]
10.85 [0.43]
12.85 [0.51]
14.85 [0.58]
16.85 [0.66]
18.85 [0.74]
20.85 [0.82]
22.85 [0.90]
24.85 [0.98]
26.85 [1.06]
28.85 [1.14]
30.85 [1.21]
32.85 [1.29]
34.85 [1.37]
36.85 [1.45]
38.85 [1.53]
40.85 [1.61]
42.85 [1.69]
44.85 [1.77]
46.85 [1.84]
48.85 [1.92]
50.85 [2.00]
52.85 [2.08]
54.85 [2.16]
56.85 [2.34]
58.85 [2.32]
60.85 [2.40]
62.85 [2.47]
64.85 [2.55]
C
9.95 [0.39]
11.95 [0.47]
13.95 [0.55]
15.95 [0.63]
17.95 [0.71]
19.95 [0.79]
21.95 [0.86]
23.95 [0.94]
25.95 [1.02]
27.95 [1.10]
29.95 [1.18]
31.95 [1.26]
33.95 [1.34]
35.95 [1.42]
37.95 [1.49]
39.95 [1.57]
41.95 [1.65]
43.95 [1.73]
45.95 [1.81]
47.95 [1.89]
49.95 [1.97]
51.95 [2.05]
53.95 [2.12]
55.95 [2.20]
57.95 [2.28]
59.95 [2.36]
61.95 [2.44]
63.95 [2.52]
65.95 [2.60]
Part Numbers
1734493-8
1-1734493-0
1-1734493-2
1-1734493-4
1-1734493-6
1-1734493-8
2-1734493-0
2-1734493-2
2-1734493-4
2-1734493-6
2-1734493-8
3-1734493-0
3-1734493-2
3-1734493-4
3-1734493-6
3-1734493-8
4-1734493-0
4-1734493-2
4-1734493-4
4-1734493-6
4-1734493-8
5-1734493-0
5-1734493-2
5-1734493-4
5-1734493-6
5-1734493-8
6-1734493-0
6-1734493-2
6-1734493-4
Note: All part numbers are RoHS compliant.
75
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Headers, Shrouded, Double Row, Surface Mount, Vertical Mount
0.5 [.02] Square Posts
C
B
Material and Finish
A
2.00 ± 0.10
[.079 ± .004]
Housing — Black color, PA9T (Nylon
9T), UL 94 V-O Rated
Posted Contacts — Brass, plated as
follows:
0.00076 [.000003] min. gold on contact
area, with 0.00254 [.00010] matte tin on
soldertails, with entire contact
underplated 0.00127 [.000050] min.
nickel
5.50
[.217]
4.50
[.177]
2.00 ± 0.05 Pitch
[.079 ± .001]
2.40
[.094]
Related Product Data
2.0 Pitch Vertical
Mateable Receptacles —
pages 80, 81, and 84
5.20
Ref.
[.205]
1.20 Ref.
[.047]
8.00
Ref.
[.315]
5.60 ± 0.15
[.220 ± .006]
Cap
3.60 ± 0.15
[.142 ± .005]
6.50
[.256]
.0.50
[.020]
2.60 ± 0.15
[.102 ± .005]
6.70 ± 0.25
[.264 ± .010]
22.00
[.866]
2.00
Pitch
[..079]
4
1.00
[25.4]
7.50
[1.38]
1.30
Typ.
[.051]
Recommended PCB Layout
No. of
Positions
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
Dimensions
A
6.0 [0.24]
8.0 [0.31]
10.0 [0.39]
12.0 [0.47]
14.0 [0.55]
16.0 [0.63]
18.0 [0.71]
20.0 [0.79]
22.0 [0.87]
24.0 [0.94]
26.0 [1.02]
28.0 [1.10]
30.0 [1.18]
32.0 [1.26]
34.0 [1.34]
36.0 [1.42]
38.0 [1.50]
40.0 [1.57]
42.0 [1.65]
44.0 [1.73]
46.0 [1.81]
48.0 [1.89]
B
8.85 [0.35]
10.85 [0.43]
12.85 [0.51]
14.85 [0.58]
16.85 [0.66]
18.85 [0.74]
20.85 [0.82]
22.85 [0.90]
24.85 [0.98]
26.85 [1.06]
28.85 [1.14]
30.85 [1.21]
32.85 [1.29]
34.85 [1.37]
36.85 [1.45]
38.85 [1.53]
40.85 [1.61]
42.85 [1.69]
44.85 [1.77]
46.85 [1.84]
48.85 [1.92]
50.85 [2.00]
C
9.95 [0.39]
11.95 [0.47]
13.95 [0.55]
15.95 [0.63]
17.95 [0.71]
19.95 [0.79]
21.95 [0.86]
23.95 [0.94]
25.95 [1.02]
27.95 [1.10]
29.95 [1.18]
31.95 [1.26]
33.95 [1.34]
35.95 [1.42]
37.95 [1.49]
39.95 [1.57]
41.95 [1.65]
43.95 [1.73]
45.95 [1.81]
47.95 [1.89]
49.95 [1.97]
51.95 [2.05]
Part Numbers
2041068-8
1-2041068-0
1-2041068-2
1-2041068-4
1-2041068-6
1-2041068-8
2-2041068-0
2-2041068-2
2-2041068-4
2-2041068-6
2-2041068-8
3-2041068-0
3-2041068-2
3-2041068-4
3-2041068-6
3-2041068-8
4-2041068-0
4-2041068-2
4-2041068-4
4-2041068-6
4-2041068-8
5-2041068-0
Note: All part numbers are RoHS compliant.
76
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Headers, Shrouded, Double Row, Surface Mount, Vertical Mount
(Continued)
0.5 [.02] Square Straight
Posts
A
Material and Finish
Housing — Black high temperature
thermoplastic, UL 94 V-O Rated
Posted Contacts — Phosphor Bronze,
duplex plated as follows:
0.00076[0.000030] min. gold on contact
area, 0.00381[.000150] min. tin on
solder area, with entire contact
underplated 0.00127[.000050] min.
nickel
2.00
[.079]
1.91±0.05
[0.75±.002] 2 Plc.
6.2
[.244]
6.35
[.250]
7.04
[.277]
B
4.0
[.157]
Vacuum Adapter Cap
1.91±0.05
[0.75±.002]
Receptacle Assemblies,
Double Row, Vertical Mount with
Vacuum Adapter Cap
3.6
[.142]
C
Product Specification
108-57328
3.02
[.119]
Packaging Method — Tape and reel
4.50
[.177]
2.00
[.079] TYP
2.00
[.079]
1.09
[.043] 2 Plc.
0.51
[.020] TYP
1.4
[.055] 2 Plc.
D
4
2.00
[.079] TYP
1.2
[.047] TYP
7.56
[.298] TYP
1.20
[.047] 2 Plc.
1.14
[.045] TYP
D
Recommended PCB Layout
No. of
Positions
20
30
A
26.2 [1.03]
36.2 [1.43]
Dimensions
B
C
20.0 [0.79]
24.3 [0.96]
30.0 [1.18]
34.3 [1.35]
D
16.0 [.63]
26.0 [1.02]
Part Numbers
2-1734569-0
3-1734569-0
Note: All part numbers are RoHS compliant.
77
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Headers, Shrouded, Double Row, Thru-Hole, Vertical Mount
0.5 [.02] Square Straight
Posts with Cable Shroud
Material and Finish
Housing — Black thermoplastic,
UL 94 V-O Rated
Posted Contacts — Brass, duplex
plated as follows:
0.00254 [.000100] min. tin on contact
area, with entire contact underplated
0.00127 [.000050] min. nickel
1.15
[.045]
2.0
[.079] TYP
4.3
[.169]
2.0
[.079]
TYP
1.35
[.053] TYP
A±0.25
[±.010]
C +0.2/-0.05
[+.008/-.002]
Related Product Data
B±0.3
[±.012]
Mateable Receptacles —
See Drawings 1470106 Contacts and
1470107 Housing
5.00
[1.97]
0.95
TYP
[.037]
1.60
TYP
[0.63]
Box Header
Product Specification
108-57217
6.5
[.256]
0.8
[.031]
3.0±0.2
[.118±.008]
3.5
[.138]
Packaging Method — Loose piece,
bag
0.5±0.05
[.02±.002]
A
2.00
TYP
[.08]
0.7±0.1
[.028±.004]
4
Recommended PCB Layout
No. of
Position
6
8
10
12
14
16
18
20
22
24
26
28
30
32
A
4.0 [0.16]
6.0 [0.24]
8.0 [0.31]
10.0 [0.39]
12.0 [0.47]
14.0 [0.55]
16.0 [0.63]
18.0 [0.71]
20.0 [0.79]
22.0 [0.87]
24.0 [0.94]
26.0 [1.02]
28.0 [1.10]
30.0 [1.18]
Dimensions
B
8.0 [0.31]
10.0 [0.39]
12.0 [0.47]
14.0 [0.55]
16.0 [0.63]
18.0 [0.71]
20.0 [0.79]
22.0 [0.87]
24.0 [0.94]
26.0 [1.02]
28.0 [1.10]
30.0 [1.18]
32.0 [1.26]
34.0 [1.34]
C
6.74 [0.26]
8.74 [0.34]
10.74 [0.42]
12.74 [0.50]
14.74 [0.58]
16.74 [0.66]
18.74 [0.74]
20.74 [0.82]
22.74 [0.89]
24.74 [0.97]
26.74 [1.05]
28.74 [1.13]
30.74 [1.21]
32.74 [1.29]
Part Numbers
1470109-6
1470109-8
1-1470109-0
1-1470109-2
1-1470109-4
1-1470109-6
1-1470109-8
2-1470109-0
2-1470109-2
2-1470109-4
2-1470109-6
2-1470109-8
3-1470109-0
3-1470109-2
Note: All part numbers are RoHS compliant.
78
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Headers, Shrouded, Double Row, Thru-Hole, Right-Angle Mount
2.0
[.079] TYP
0.5 [.02] Square Right-Angle
Posts with Cable Shroud
0.5±0.05
[.02±.002]
1.15
[.045]
Material and Finish
4.3
[.169]
Housing — Black thermoplastic,
UL 94 V-O Rated
Posted Contacts — Brass, duplex
plated as follows:
0.00254 [.000100] min. tin on contact
area, with entire contact underplated
0.00127 [.000050] min. nickel
.079
[2.0]
1.35
[.053] TYP
C +0.2/-0.05
[+.008/-.002]
Related Product Data
5.00
[1.97]
B±0.3
[±.012]
0.95
TYP
[.037]
1.60
TYP
[0.63]
0.8
[.031]
9.5
[.374]
3.5
[.138]
7.00
[.276]
Pitch Right-Angle Mount
Mateable Receptacles —
See Drawings 1470106 Contacts and
1470107 Housing
A±0.25
[±.010]
Product Specification
108-57217
Packaging Method — Loose piece,
bag
2.0±0.1
[.079±.004]
3.0±0.2
[.118±.008]
2.00
TYP
[.08]
0.7±0.1
[.028±.004]
4
7.00
[.276]
Recommended PCB Layout
No. of
Position
6
8
10
12
14
16
18
20
22
24
26
28
30
32
A
4.0 [0.16]
6.0 [0.24]
8.0 [0.32]
10.0 [0.39]
12.0 [0.47]
18.0 [0.71]
14.0 [0.55]
16.0 [0.63]
22.0 [0.87]
20.0 [0.79]
24.0 [0.94]
28.0 [1.10]
26.0 [1.02]
30.0 [1.18]
Dimensions
B
8.00 [0.31]
10.00 [0.39]
12.00 [0.47]
14.00 [0.55]
16.00 [0.63]
18.00 [0.71]
20.00 [0.79]
22.00 [0.87]
24.00 [0.94]
26.00 [1.02]
28.00 [1.10]
30.00 [1.18]
32.00 [1.26]
34.00 [1.34]
C
6.74 [0.26]
8.74 [0.34]
10.74 [0.42]
12.74 [0.50]
14.74 [0.58]
16.74 [0.66]
18.74 [0.74]
20.74 [0.82]
22.74 [0.89]
24.74 [0.97]
26.74 [1.05]
28.74 [1.13]
30.74 [1.21]
32.74 [1.29]
Part Numbers
1470108-6
1470108-8
1-1470108-0
1-1470108-2
1-1470108-4
1-1470108-6
1-1470108-8
2-1470108-0
2-1470108-2
2-1470108-4
2-1470108-6
2-1470108-8
3-1470108-0
3-1470108-2
Note: All part numbers are RoHS compliant.
79
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Centerline Receptacles, Double Row, Thru-Hole, Vertical Mount
Receptacle, Thru-Hole,
Vertical
Material and Finish
2.0 Mount Type
w/PickUp
Housing — Black thermoplastic,
UL 94 V-O Rated, 245°C Reflow
Contacts — Copper alloy, plated as
follows:
A — 0.00020 [.000008] min. gold on
contact area, 0.00203 [.000080] min. tin
on solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
B — 0.00076 [.000030] min. gold on
contact area, 0.00203 [.000080] min. tin
on solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
A±0.25
[±.01]
B±0.2
[±.008]
2.0±0.1
[.079±.004]
0.36
[.014]
4.00
[.157]
4.50
[.177]
L±0.1
[±.004]
1.67
Ref.
[.066]
0.5
[.02]
0.5
[.02]
Related Product Data
Mateable Headers —
pages 66-76, 78, 79
0.20
TYP
[.008]
2.0±0.1
TYP
[.079±.004]
0.75±0.05
TYP
[.030±.002]
Product Specification
108-57197
Packaging Method — Tray
4
2.0±0.05
[.079±.002]
TYP
2.0±0.05
TYP
[.079±.002]
Recommended PCB Layout
Part Numbers
Plating A
Dimensions
No. of
Positions
A
B
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
4.0 [.157]
6.0 [.236]
8.0 [.315]
10.0 [.394]
12.0 [.472]
14.0 [.551]
16.0 [.630]
18.0 [.709]
20.0 [.787]
22.0 [.866]
24.0 [.945]
26.0 [1.024]
28.0 [1.102]
30.0 [1.181]
32.0 [1.260]
34.0 [1.339]
36.0 [1.417]
38.0 [1.496]
40.0 [1.575]
42.0 [1.654]
44.0 [1.732]
46.0 [1.811]
48.0 [1.890]
50.0 [1.969]
2.0 [.079]
4.0 [.157]
6.0 [.236]
8.0 [.315]
10.0 [.394]
12.0 [.472]
14.0 [.551]
16.0 [.630]
18.0 [.709]
20.0 [.787]
22.0 [.866]
24.0 [.945]
26.0 [1.024]
28.0 [1.102]
30.0 [1.181]
32.0 [1.260]
34.0 [1.339]
36.0 [1.417]
38.0 [1.496]
40.0 [1.575]
42.0 [1.654]
44.0 [1.732]
46.0 [1.811]
48.0 [1.890]
Dim. L
1.2+/-0.1
(.047+/-.004)
1470209-1
1470209-2
1470209-3
1470209-4
1470209-5
1470209-6
1470209-7
1470209-8
1470209-9
1-1470209-0
1-1470209-1
1-1470209-2
1-1470209-3
1-1470209-4
1-1470209-5
1-1470209-6
1-1470209-7
1-1470209-8
1-1470209-9
2-1470209-0
2-1470209-1
2-1470209-2
2-1470209-3
2-1470209-4
Plating B
Dim. L
2.6+/-0.1
(.102+/-.004)
2-1470209-5
2-1470209-6
2-1470209-7
2-1470209-8
2-1470209-9
3-1470209-0
3-1470209-1
3-1470209-2
3-1470209-3
3-1470209-4
3-1470209-5
3-1470209-6
3-1470209-7
3-1470209-8
3-1470209-9
4-1470209-0
4-1470209-1
4-1470209-2
4-1470209-3
4-1470209-4
4-1470209-5
4-1470209-6
4-1470209-7
4-1470209-8
Dim. L
1.2+/-0.1
(.047+/-.004)
5-1470209-1
5-1470209-2
5-1470209-3
5-1470209-4
5-1470209-5
5-1470209-6
5-1470209-7
5-1470209-8
5-1470209-9
6-1470209-0
6-1470209-1
6-1470209-2
6-1470209-3
6-1470209-4
6-1470209-5
6-1470209-6
6-1470209-7
6-1470209-8
6-1470209-9
7-1470209-0
7-1470209-1
7-1470209-2
7-1470209-3
7-1470209-4
Dim. L
2.6+/-0.1
(.102+/-.004)
7-1470209-5
7-1470209-6
7-1470209-7
7-1470209-8
7-1470209-9
8-1470209-0
8-1470209-1
8-1470209-2
8-1470209-3
8-1470209-4
8-1470209-5
8-1470209-6
8-1470209-7
8-1470209-8
8-1470209-9
9-1470209-0
9-1470209-1
9-1470209-2
9-1470209-3
9-1470209-4
9-1470209-5
9-1470209-6
9-1470209-7
9-1470209-8
Note: All part numbers are RoHS compliant.
80
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Centerline Receptacles, Double Row, Thru-Hole, Vertical Mount (Continued)
Receptacle, Thru-Hole,
Vertical
Material and Finish
Housing — Black thermoplastic,
UL 94 V-O Rated, 265°C Process Capable
Contacts — Copper alloy, plated as
follows:
A — 0.00020 [.000008] min. gold on
contact area, 0.00203 [.000080] min. tin
on solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
B — 0.00076 [.000030] min. gold on
contact area, 0.00203 [.000080] min. tin
on solder area, with entire contact
underplated 0.00127 [.000050] min.
nickel
A±0.25
[±.01]
B±0.2
[±.008]
2.0±0.1
[.079±.004]
0.36
[.014]
4.00
[.157]
4.50
[.177]
L±0.1
[±.004]
0.5
[.02]
0.5
[.02]
Related Product Data
Mateable Headers —
pages 66-76, 78, 79
0.20
TYP
[.008]
2.0±0.1
TYP
[.079±.004]
0.75±0.05
TYP
[.030±.002]
2.0 Mount Type
w/PickUp
1.67
Ref.
[.066]
Product Specification
108-57197
Packaging Method — Tray
2.0±0.05
[.079±.002]
TYP
4
2.0±0.05
TYP
[.079±.002]
Recommended PCB Layout
Part Numbers
Plating A
Dimensions
No. of
Positions
A
B
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
40*
4.0 [.157]
6.0 [.236]
8.0 [.315]
10.0 [.394]
12.0 [.472]
14.0 [.551]
16.0 [.630]
18.0 [.709]
20.0 [.787]
22.0 [.866]
24.0 [.945]
26.0 [1.024]
28.0 [1.102]
30.0 [1.181]
32.0 [1.260]
34.0 [1.339]
36.0 [1.417]
38.0 [1.496]
40.0 [1.575]
42.0 [1.654]
44.0 [1.732]
46.0 [1.811]
48.0 [1.890]
50.0 [1.969]
40.0 [1.575]
2.0 [.079]
4.0 [.157]
6.0 [.236]
8.0 [.315]
10.0 [.394]
12.0 [.472]
14.0 [.551]
16.0 [.630]
18.0 [.709]
20.0 [.787]
22.0 [.866]
24.0 [.945]
26.0 [1.024]
28.0 [1.102]
30.0 [1.181]
32.0 [1.260]
34.0 [1.339]
36.0 [1.417]
38.0 [1.496]
40.0 [1.575]
42.0 [1.654]
44.0 [1.732]
46.0 [1.811]
48.0 [1.890]
38.0 [1.496]
Dim. L
1.2+/-0.1
(.047+/-.004)
1734506-1
1734506-2
1734506-3
1734506-4
1734506-5
1734506-6
1734506-7
1734506-8
1734506-9
1-1734506-0
1-1734506-1
1-1734506-2
1-1734506-3
1-1734506-4
1-1734506-5
1-1734506-6
1-1734506-7
1-1734506-8
1-1734506-9
2-1734506-0
2-1734506-1
2-1734506-2
2-1734506-3
2-1734506-4
—
Plating B
Dim. L
2.6+/-0.1
(.102+/-.004)
2-1734506-5
2-1734506-6
2-1734506-7
2-1734506-8
2-1734506-9
3-1734506-0
3-1734506-1
3-1734506-2
3-1734506-3
3-1734506-4
3-1734506-5
3-1734506-6
3-1734506-7
3-1734506-8
3-1734506-9
4-1734506-0
4-1734506-1
4-1734506-2
4-1734506-3
4-1734506-4
4-1734506-5
4-1734506-6
4-1734506-7
4-1734506-8
4-1734506-9
Dim. L
1.2+/-0.1
(.047+/-.004)
5-1734506-1
5-1734506-2
5-1734506-3
5-1734506-4
5-1734506-5
5-1734506-6
5-1734506-7
5-1734506-8
5-1734506-9
6-1734506-0
6-1734506-1
6-1734506-2
6-1734506-3
6-1734506-4
6-1734506-5
6-1734506-6
6-1734506-7
6-1734506-8
6-1734506-9
7-1734506-0
7-1734506-1
7-1734506-2
7-1734506-3
7-1734506-4
—
Dim. L
2.6+/-0.1
(.102+/-.004)
7-1734506-5
7-1734506-6
7-1734506-7
7-1734506-8
7-1734506-9
8-1734506-0
8-1734506-1
8-1734506-2
8-1734506-3
8-1734506-4
8-1734506-5
8-1734506-6
8-1734506-7
8-1734506-8
8-1734506-9
9-1734506-0
9-1734506-1
9-1734506-2
9-1734506-3
9-1734506-4
9-1734506-5
9-1734506-6
9-1734506-7
9-1734506-8
9-1734506-9
*Keying position 6.
Note: All part numbers are RoHS compliant.
81
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Receptacle, Double Row, Surface Mount, Right-Angle Mount
Receptacle, Surface Mount,
Right-Angle
Material and Finish
Housing — Black Thermoplastic,
UL 94V-0 Rated
Contact — Phosphor Bronze
Contact Finish — 0.00020 [.000008]
Min. Gold Plated on Contact Area,
0.00229 [.000090] Min. Tin Plated on
Solder Tail, 0.00127 [.000050] Min.
Nickel Underplated Over All
A±0.25
[±.01]
Mateable Headers — pages 66-73
Product Specification
108-57197
Packaging Method — Tape and reel
B±0.10
[±.004]
2.00±0.05
[.079±.002]
1.10
TYP
[.042]
Related Product Data
2mm Receptacle
0.60±0.05
[.024±.002] TYP
5.0±0.2
[.197±.008]
0.15±0.03
[.006±.001]
2.00
[.079]
4.90±0.25
[.193±.01]
4.90±0.25
[.193±.01]
4.00
[.157]
0.90
[.035]
8.30±0.5
[.327±.02]
2.00
TYP
[.079]
B
9.00
[.354]
4.00
TYP
[.157]
4
1.00
TYP
[.039]
Recommended PCB Layout
Position
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
Dimensions
A
6.20 [.244]
8.20 [.323]
10.20 [.402]
12.20 [.480]
14.20 [.559]
16.20 [.638]
18.20 [.717]
20.20 [.795]
22.20 [.874]
24.20 [.953]
26.20 [1.031]
28.20 [1.110]
30.20 [1.189]
32.20 [1.268]
34.20 [1.346]
36.20 [1.425]
38.20 [1.504]
40.20 [1.583]
42.20 [1.661]
44.20 [1.740]
46.20 [1.819]
48.20 [1.898]
50.20 [1.976]
B
4.0 [.157]
6.0 [.236]
8.0 [.315]
10.0 [.394]
12.0 [.472]
14.0 [.551]
16.0 [.630]
18.0 [.709]
20.0 [.787]
22.0 [.866]
24.0 [.945]
26.0 [1.024]
28.0 [1.102]
30.0 [1.181]
32.0 [1.260]
34.0 [1.339]
36.0 [1.417]
38.0 [1.496]
40.0 [1.575]
42.0 [1.654]
44.0 [1.732]
46.0 [1.811]
48.0 [1.890]
Part Numbers
1734606-6
1734606-8
1-1734606-0
1-1734606-2
1-1734606-4
1-1734606-6
1-1734606-8
2-1734606-0
2-1734606-2
2-1734606-4
2-1734606-6
2-1734606-8
3-1734606-0
3-1734606-2
3-1734606-4
3-1734606-6
3-1734606-8
4-1734606-0
4-1734606-2
4-1734606-4
4-1734606-6
4-1734606-8
5-1734606-0
Note: All part numbers are RoHS compliant.
82
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Receptacle, Double Row, Thru-Hole, Right-Angle Mount
Receptacle, Thru-Hole,
Right-Angle
A
Housing — Black Thermoplastic,
UL 94V-0 Rated
Contact — Phosphor Bronze
Contact Finish — 0.00020 [.000008]
Min. Gold Plated on Contact Area,
0.00254 [.000100] Min. Tin Plated on
Solder Tail, 0.00127 [.000050] Min.
Nickel Underplated Over All
3±0.02
[.118±.001]
2±0.05
[.079±.002]
2±0.15
[.079±.006]
Related Product Data
2.00
[.079]
TYP
Mateable Headers — pages 66-73
Position
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
1.45
[.057]
1.5±0.05
[.059±.002]
5.2
[.205]
A±0.10
[±.004]
A
0.2±0.03
[.008±.001]
2.00
[.079]
Section A-A
2.00
[.079]
TYP
2mm Receptacle
.080
[.031] DIA TYP
A
0.5±0.05
[.02±.002]
B±0.20
[±.008]
Packaging Method — Tube
7.2±0.15
[.283±.006]
4.85±0.15
[.191±.006]
Material and Finish
Product Specification
108-57197
0.35
[.014]
Recommended PCB Layout
Dimensions
A
6.0 [.236]
8.0 [.315]
10.0 [.394]
12.0 [.472]
14.0 [.551]
16.0 [.630]
18.0 [.709]
20.0 [.787]
22.0 [.866]
24.0 [.945]
26.0 [1.024]
28.0 [1.102]
30.0 [1.181]
32.0 [1.260]
34.0 [1.339]
36.0 [1.417]
38.0 [1.496]
40.0 [1.575]
42.0 [1.654]
44.0 [1.732]
46.0 [1.811]
48.0 [1.890]
50.0 [1.969]
52.0 [2.047]
54.0 [2.123]
56.0 [2.205]
58.0 [2.283]
60.0 [2.362]
62.0 [2.441]
64.0 [2.520]
66.0 [2.598]
68.0 [2.677]
70.0 [2.756]
72.0 [2.834]
74.0 [2.913]
76.0 [2.992]
78.0 [3.071]
B
8.50 [.335]
10.50 [.413]
12.50 [.492]
14.50 [.571]
16.50 [.650]
18.50 [.728]
20.50 [.807]
22.50 [.886]
24.50 [.965]
26.50 [1.043]
28.50 [1.122]
30.50 [1.201]
32.50 [1.280]
34.50 [1.358]
36.50 [1.437]
38.50 [1.516]
40.50 [1.594]
42.50 [1.673]
44.50 [1.752]
46.50 [1.831]
48.50 [1.909]
50.50 [1.988]
52.50 [2.067]
54.50 [2.146]
56.50 [2.224]
58.50 [2.303]
60.50 [2.381]
62.50 [2.461]
64.50 [2.539]
66.50 [2.618]
68.50 [2.697]
70.50 [2.776]
72.50 [2.854]
74.50 [2.933]
76.50 [3.012]
78.50 [3.091]
80.50 [3.169]
Part Numbers
1734531-8
1-1734531-0
1-1734531-2
1-1734531-4
1-1734531-6
1-1734531-8
2-1734531-0
2-1734531-2
2-1734531-4
2-1734531-6
2-1734531-8
3-1734531-0
3-1734531-2
3-1734531-4
3-1734531-6
3-1734531-8
4-1734531-0
4-1734531-2
4-1734531-4
4-1734531-6
4-1734531-8
5-1734531-0
5-1734531-2
5-1734531-4
5-1734531-6
5-1734531-8
6-1734531-0
6-1734531-2
6-1734531-4
6-1734531-6
6-1734531-8
7-1734531-0
7-1734531-2
7-1734531-4
7-1734531-6
7-1734531-8
8-1734531-0
4
Note: All part numbers are RoHS compliant.
83
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
METRIC
Dimensions are
millimeters over inches
AMPMODU Interconnection System
2mm Receptacle, Double Row, Surface Mount, Vertical Mount
Receptacle, Top Entry,
Surface Mount
B±0.20
[±.008]
Material and Finish
Housing—Black Thermoplastic,
UL 94V-0 Rated
Contact—Copper Alloy, plated 0.00076
[.000030] Min. Gold Plated on Contact
Area, 0.00254 [.000100] Tin Plated on
Solder Tail, Underplated 0.00127
[.000050] Nickel
Cap—Thermoplastic
Related Product Data
Mateable Headers—pages 66-75,
78, 79
2mm Receptacle
A±0.10
[±.004] X
2.00±0.05
[.079±.002]
4.00±0.15
[.157±.006]
2.00±0.05
[.079±.002]
X
0.50±0.05
[.020±.002]
6.00±0.15
[.236±.006]
B—8.00/2.00±2.00
[.315/.079±.079]
8.00±0.15
[.315±.006]
Cavity Mark
Location
4.25±0.15
[.167±.006]
0.96±0.10
[.038±.004]
0.40±0.05
[.016±.002] 2 Plc.
+0.25
4.70
-0.13
+0.01
[.185
]
-.005
4.80±0.15
[.189±.006]
0.71±0.05
[.028±.002]
Alignment Peg 2
Plc. Ref.
A+2.00±0.10
[.079±.004]
Product Specification
108-57227
0.20±0.03
[.008±.001]
1a
2.00
[.079]
5.10±0.50
[.201±.020]
1b
Packaging Method—Tape and reel
2.00
[.079] TYP
2.00
[.079] TYP
A
2.25
[.089]
2.25
[.089]
1.12
[.044]
0.85±0.05
A+2.00
[.033±.002] DIA TYP
[+.079]
2 Plc.
Recommended PCB Layout
Position
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
Dimensions
A
B
6.0 [.236]
8.40 [.331]
8.0 [.315]
10.40 [.409]
10.0 [.394] 12.40 [.488]
12.0 [.472] 14.40 [.567]
14.0 [.551] 16.40 [.646]
16.0 [.630] 18.40 [.724]
18.0 [.709] 20.40 [.803]
20.0 [.787] 22.40 [.881]
22.0 [.866] 24.40 [.961]
24.0 [.945] 26.40 [1.039]
26.0 [1.024] 28.40 [1.118]
28.0 [1.102] 30.40 [1.197]
30.0 [1.181] 32.40 [1.276]
32.0 [1.260] 34.40 [1.354]
34.0 [1.339] 36.40 [1.433]
36.0 [1.417] 38.40 [1.512]
38.0 [1.496] 40.40 [1.591]
1.12
[.044]
6.00
[.236]
6.00
[.236]
4
A
Recommended PCB Layout
(Without Alignment Peg)
245C Reflow Part Numbers
with Alignment Peg*
without Alignment Peg
1734516-8
5-1734516-8
1-1734516-0
6-1734516-0
1-1734516-2
6-1734516-2
1-1734516-4
6-1734516-4
1-1734516-6
6-1734516-6
1-1734516-8
6-1734516-8
2-1734516-0
7-1734516-0
2-1734516-2
7-1734516-2
2-1734516-4
7-1734516-4
2-1734516-6
7-1734516-6
2-1734516-8
7-1734516-8
3-1734516-0
8-1734516-0
3-1734516-2
8-1734516-2
3-1734516-4
8-1734516-4
3-1734516-6
8-1734516-6
3-1734516-8
8-1734516-8
4-1734516-0
9-1734516-0
265C Reflow Part Numbers
with Alignment Peg*
without Alignment Peg
2041069-8
5-2041069-8
1-2041069-0
6-2041069-0
1-2041069-2
6-2041069-2
1-2041069-4
6-2041069-4
1-2041069-6
6-2041069-6
1-2041069-8
6-2041069-8
2-2041069-0
7-2041069-0
2-2041069-2
7-2041069-2
2-2041069-4
7-2041069-4
2-2041069-6
7-2041069-6
2-2041069-8
7-2041069-8
3-2041069-0
8-2041069-0
3-2041069-2
8-2041069-2
3-2041069-4
8-2041069-4
3-2041069-6
8-2041069-6
3-2041069-8
8-2041069-7
4-2041069-0
9-2041069-0
*See views 1a and 1b
Note: All part numbers are RoHS compliant.
84
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208