CX11SM CRYSTAL 20 MHz to 250 MHz Ultra-Miniature Surface Mount Quartz Crystal Actual Size DESCRIPTION FEATURES Ultra-miniature, surface mount design Hermetically sealed ceramic package Excellent aging characteristics Full military testing available Side View ceramic lid PACKAGE DIMENSIONS A DIM A B C D PR Cochlear Implants Infusion Pumps Military & Aerospace Ceramic Medical Telemetry Data Communications Survival radio Industrial, Computer & Communications Communications Transmitters Thin Glass Avionic Indicators and Instruments Cockpit Instrumentation Displays D C MAXIMUM inches mm 0.135 3.43 0.068 1.73 see below 0.037 0.94 THICKNESS (DIM C) Lid Glass Neurostimulators EL Medical BOTTOM TYPICAL inches mm 0.127 3.20 0.060 1.50 0.027 0.69 Designed and manufactured in the USA APPLICATIONS TOP B IM High shock and vibration survival glass lid IN Available with glass or ceramic lid Top View AR Y When miniaturization is paramount, Statek’s CX11SM AT quartz crystal is an excellent choice. Available in frequencies from 20 MHz to 250 MHz, this crystal has a 3.2 mm x 1.5 mm footprint and a height under 1.0 mm. The resonator is manufactured using Statek’s photolithographic and chemical milling processes and then sealed within a ceramic package for high stability and low aging. Available with tight calibration tolerances and high stability over temperature, this crystal is well suited for many demanding applications. Termination Typical inches mm Maximum inches mm SM1 0.030 0.77 0.035 0.90 SM2/SM4 0.031 0.79 0.036 0.92 SM3/SM5 0.033 0.84 0.038 0.97 SM1 0.029 0.74 0.034 0.87 SM2/SM4 0.030 0.77 0.035 0.89 SM3/SM5 0.032 0.81 0.037 0.94 SM1 0.025 0.64 0.030 0.77 SM2/SM4 0.026 0.66 0.031 0.79 SM3/SM5 0.028 0.71 0.033 0.84 SUGGESTED LAND PATTERN 0.138 (3.50) 0.126 (3.20) 0.099 (2.51) Pulse Generators Tracking Beacons 0.059 0.071 (1.50) (1.80) Wildlife Telemetry Inches (mm) 0.039 (0.99) Preliminary 1209 10179 STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com SPECIFICATIONS TERMINATIONS Specifications are typical at 25OC unless otherwise noted. Specifications are subject to change without notice. Designation SM1 SM2 SM3 SM4 SM5 20 MHz 24 MHz 155.52 MHz Motional Resistance R1(Ω) 80 30 25 Motional Capacitance C1 (fF) 1.0 1.4 2.8 Quality Factor Q (k) 100 150 16 Shunt Capacitance C0 (pF) 0.6 0.7 1.4 Calibration Tolerance1 ±100 ppm, or tighter as required Load Capacitance 10 pF (unless specified otherwise) Drive Level 200 µW MAX Frequency-Temperature Stability1,2 ±50 ppm to ±10 ppm (Commercial) ±100 ppm to ±20 ppm (Industrial) IN ±100 ppm to ±30 ppm (Military) EQUIVALENT CIRCUIT AR Y Fundamental Frequency Termination Gold Plated (Lead Free) Solder Plated Solder Dipped Solder Plated (Lead Free) Solder Dipped (Lead Free) 5 ppm MAX (better than 1 ppm available) Shock, survival 5,000 g, 0.3 ms, 1/2 sine Vibration, survival3 20 g, 10-2,000 Hz swept sine Operating Temp. Range -10OC to +70OC (Commercial) -40OC to +85OC (Industrial) -55OC to +125OC (Military) Storage Temp. Range -55OC to +125OC Max Process Temperature 260OC for 20 sec. PACKAGING OPTIONS • Tray Pack IM Aging, first year • 12 mm tape, 7”or 13” reels EL Per EIA 481 (see Tape and Reel data sheet 10109) PR 1. Other tolerances available. Contact factory. 2. Does not include calibration tolerance. The characteristics of the frequency stability over temperature follow that of the AT thickness-shear mode. 3. Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also available. HOW TO ORDER CX11SM AT CRYSTALS CX11 S Blank = Standard S = Special or custom C SM1 Blank = Glass Lid T = Thin Glass Lid C = Ceramic Lid SM1 = Gold Plated (Lead Free) SM2 = Solder Plated SM3 = Solder Dipped SM4 = Solder Plated (Lead Free) SM5 = Solder Dipped (Lead Free) Note: Crystals with SM1, SM4 or SM5 terminations are Pb-free. Crystals with SM2 or SM3 terminations contain Pb. — 24.0M , Frequency M = MHz 100 / 100 / — / Calibration Frequency Tolerance Stability over @ 250C Temp.Range (in ppm) (in ppm) Temp. Range: C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified OR — / — / I 200 Total Frequency Tolerance (in ppm) / I Operating Temp. Range: C = -10OC to +70OC I = -40OC to +85OC M = -55OC to +125OC S = Customer Specified Preliminary 1209 10179 STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com