Customer Information Sheet DRAWING No.: M80-25300XX & M80-25400XX SHT 5 OF 5 IF IN DOUBT - ASK SPECIFICATION: NOT TO SCALE C THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm TIN MINIMUM (42 FINISH) MATERIAL: BERYLLIUM COPPER 1.17 0.15 3.00 1.00 FINISH: 45 = 0.3µ MIN GOLD, ALL OVER 42 = 3µ MIN 100% TIN AND 0.3µ MIN GOLD, SELECTIVE PLATE ALL FINISHES = NICKEL UNDERPLATE 0.25 MAX (CUT-OFF TAB) GOLD MINIMUM (42 FINISH) MECHANICAL: INSERTION FORCE = 2.8N MAX, 1.0N MIN WITHDRAWAL FORCE = 1.8N MAX, 0.2N MIN DURABILITY = 500 OPERATIONS ENVIRONMENTAL: OPERATING TEMPERATURE = -55 C TO +125 C PACKING: REEL (AS SHOWN), 15K/REEL GOLD MINIMUM (45 FINISH) FOR COMPLETE CONNECTOR SPECIFICATION, SEE COMPONENT SPECIFICATION C040XX (LATEST ISSUE) 6.68 3.50 4.30 1.60 1.30 REELING DETAIL SECTION Y-Y SECTION X-X 2.2 2.10 'A' 0.25 X Y 30 2.0 600 X REEL CONTACTS NOTES: 1. TO BE USED WITH THE FOLLOWING FEMALE HOUSING: M80-454XX98 = HOUSING ONLY M80-455XX98 = HOUSING + SLOTTED JACKSCREW M80-456XX98 = HOUSING + HEX SOCKET JACKSCREW M80-457XX98 = HOUSING + REVERSE FIX JACKSCREW M80-458XX98 = HOUSING + GUIDE AND BOARD MOUNT 2. SUITABLE FOR PTFE INSULATED EQUIPMENT WIRE TO BS 3G 210 TYPE A, WIRE 22-28 AWG, WIRE INSULATION 0.6mm- 1.1mm. DIMENSION PART No. 'A' 'B' M80-25300XX 1.80 1.65 M80-25400XX 1.34 1.00 ORDER CODE: WIRE SIZE: 253 = 24-22 AWG (0.22-0.34mm²) 254 = 28-26 AWG (0.08-0.12mm²) 5. CONTACTS ARE AVAILABLE LOOSE, PART NUMBER M80-28300XX FOR 24-22 AWG WIRE AND M80-28400XX FOR 28-26 AWG WIRE, SUITABLE FOR PROCESSING WITH HAND CRIMP TOOL Z80-255. INTERLEAVE PAPER HARWIN USA TEL: 603 893 5376 FAX: 603 893 5396 [email protected] HARWIN Europe (UK) HARWIN Asia TEL: 023 9231 4545 TEL: +65 6 779 4909 FAX: 023 9231 4590 FAX: +65 6 779 3868 [email protected] [email protected] THIS DRAWING AND ANY INFORMATION OR DESCRIPTIVE MATTER SET OUT HEREON ARE CONFIDENTIAL AND COPYRIGHT PROPERTY OF THE HARWIN GROUP AND MUST NOT BE DISCLOSED, LOANED, COPIED OR USED FOR MANUFACTURING, TENDERING OR FOR ANY OTHER PURPOSE WITHOUT THEIR WRITTEN PERMISSION. TOLERANCES X. X.X X.XX X.XXX = = = = BMK M80-XXX00XX 4. SUITABLE FOR PROCESSING WITH LEFT SIDE FEED CRIMPING PRESS. CONTACT datamate @harwin.com FOR DETAILS. DETAIL D R0.45 R0.55 Y 3. STRIP WIRE BY 2.5-3.0mm FOR CRIMPING. SEE DETAIL D 'B' 0.25 MATERIAL: 1mm 0.25mm 0.10mm 0.01mm ANGLES = FINISH: 45 = GOLD, ALL OVER 42 = 100% TIN & GOLD, SELECTIVE NAME ISS. 19.09.08 10159 DATE C/NOTE APPROVED: BMK CHECKED: DRAWN: RA B. M. KENT CUSTOMER REF.: ASSEMBLY DRG: TITLE: DATAMATE TRIO-TEK FEMALE CRIMP CONTACT REELED 24-22 AWG & 28-26 AWG SEE ABOVE FINISH: D DRAWING NUMBER: SEE ABOVE 5 UNLESS STATED S/AREA: mm² M80-25300XX & M80-25400XX SHT 5 OF 5