Optoway NU-33B54B-R/-P 1 *********************************************************************************************************************************************************************** NU-33B54B-R / NU-33B54B-P / NU-33B54B-R / NU-33B54B-P 155 Mbps 1310 nm Burst Mode TX / 622 Mbps 1490 nm Continuous-Mode RX 3.3V, 2X5 SFF Package, Class B B-PON ONU Transceiver ********************************************************************************************************************************************************************** FEATURES l Optical Network Unit (ONU) for ITU-T G.983.3 Class B B-PON l 1-Fiber Bi-directional WDM SM Transceiver l 155 Mbps / 1310 nm Burst-Mode Transmitter l 622 Mbps / 1490 nm Continuous-Mode Receiver with 2R Output l 2x5 Package with SC Receptacle: NU-33B54B-R l 2x5 Package with SC/PC Pigtail: NU-33B54B-P l 0 to 70oC Operating Temperature: NU-33B54B-R l -40 to 85oC Operating Temperature: NU-33B54B-R-A l Single +3.3 V Power Supply l LVPECL Differential Inputs and Outputs l LVTTL TX Shutdown Input l LVTTL RX Loss Signal Output l Wave Solderable and Aqueous Washable l Class 1 Laser International Safety Standard IEC 60825 Compliant APPLICATIONS l Fast Ethernet PON System l Broadband PON System l ATM PON System DESCRIPTION NU-33B54B series is optical network unit (ONU) for ITU-T G.983.3 B-PON with 622 Mbps in downstream and 155 Mbps in upstream. The NU-33B54B series is high performance module for Point-to-Multi-Point (M2MP) system by using 1310 nm burst-mode transmitter and 1490 nm continuous-mode receiver. The transmitter section uses a 1310 nm multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC 60825. The receiver section uses an integrated 1490 nm / 1550 nm detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. LVPECL interface is used for differential inputs and outputs. A LVTTL logic interface simplifies interface to external circuitry. LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC 60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. ORDER INFORMATION P/No. TX RX Temp. (oC) PIN Package -5 0 to 70 2X5 SFF Rec. -5 -40 to 85 2X5 SFF Rec. -29 -5 0 to 70 2X5 SFF Pig. -29 -5 -40 to 85 2X5 SFF Pig. Type Speed (Mb/s) λ (nm) Power (dBm) Type Speed (Mb/s) λ (nm) Sens. (dBm) Sat. (dBm) NU-33B54B-R BM 155 1310 2 to -4 CNT, 2R 622 1490/1550 -29 NU-33B54B-R-A BM 155 1310 2 to -4 CNT, 2R 622 1490/1550 -29 NU-33B54B-P BM 155 1310 2 to -4 CNT, 2R 622 1490/1550 NU-33B54B-P-A BM 155 1310 2 to -4 CNT, 2R 622 1490/1550 NOTE: 1. XX-XXXXXX-K, K=R, SC RECEPTACLE, K=P, SC/PC PIGTAIL WITH FIBER LENGTH 50 CM. 3. BM: Burst Mode; CNT: Continuous Mode; SFF: Small Form Factor Package. *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 12/1/2004 V3.0 Optoway NU-33B55B-R/-P 2 *********************************************************************************************************************************************************************** Absolute Maximum Ratings Parameter Power Supply Voltage Input Voltage Output Current Operating Temperature Storage Temperature Soldering Temperature Bending Radius of Fiber Symbol Min. Max. Unit Vcc 0 GND 0 0 -40 4 Vcc 30 70 85 260 V V mA o C o C o C mm Iout Topr Tstg 30 Notes With air flow 1m/sec 10 seconds on leads only For pigtail product Stress in excess of the maximum absolute ratings can cause permanent damage to the module. Recommended Operating Conditions Parameter Power Supply Voltage Power Supply Current Operating Temperature Symbol Min. Max. Unit Vcc Icc TX+RX Topr 3.13 3.47 250 70 V mA o C 0 Notes With air flow 1m/sec Transmitter Specifications ( 0oC < Topr < 70oC, 3.13V < Vcc < 3.47V ) Parameter Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Extinction Ratio Background Light Symbol Min. Typ. Max. Units Notes Po λ ΔλRMS -4 1260 2 1360 4 ER BDL 10 -35 dBm nm nm dB dBm 1 1310 170 2.0 2.0 -120 1 Mb/s ns ns dB/Hz ns 350 1600 -1.58 -0.74 0.8 Vcc 30 µA µA mV V V V V µs Data Rate 155 Optical Rise Time 1.0 Optical Fall Time 1.0 Relative Intensity Noise RIN Total Jitter Electrical Data Input Current – Low -350 Data Input Current – High Differential Input Voltage VIH - VIL 300 Data Input Voltage – Low VIL - VCC -2.0 Data Input Voltage -- High VIH - VCC -1.1 Shutdown Input Voltage -- Low VTSHDN,L 0 Shutdown Input Voltage -- High VTSHDN,H 2.0 Shut Off Time for Tx Shutdown tDIS 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs. RMS (σ) Without Input to Transmitter 10% to 90% Values 10% to 90% Values 3 3 TX Output Disable TX Output Enable ************************************************************************************************************************************************************************ OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 12/1/2004 V3.0 Optoway NU-33B55B-R/-P 3 *********************************************************************************************************************************************************************** Receiver Characteristics ( 0oC < Topr < 70 oC, 3.13V < Vcc < 3.47V ) Parameter Optical Sensitivity Saturation Optical Power Wavelength of Operation Signal Detect Assert Level Signal Detect Deassert Level Signal Detect Hysteresis Data Rate Optical Return Loss Electrical Data Output Voltage – Low Data Output Voltage – High SD Output Voltage -- Low SD Output Voltage -- High Signal Detect Assert Time Signal Detect Deassert Time Symbol Min. Sen Sat Typ. -5 1480 Pa Pd -40 1.0 622 Max. Units Notes -29 dBm 1500 -29 nm 4 4 5,6 4.0 650 dB Mb/s dB -1.58 -0.74 0.8 V V V V µs µs 14 VOL - VCC V OH - VCC VOL - VCC V OH - VCC ASMAX ANSMAX -2.0 -1.1 2.0 100 300 7 7 OFF to ON ON to OFF 4. Sensitivity and saturation levels at BER 1E-10 for a 223-1 PRBS @ER=10. 5. At least 30 dB optical isolation for the wavelength 1260 to 1360 nm. 6. 7. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL outputs. CONNECTION DIAGRAM PIN 1 2 3 4 5 6 7 8 9 10 MS I/O O O O I I I Symbol Notes RXGND RXVCC LOS RD− RD+ TXVCC TXGND TX SHUT Directly connect this pin to the receiver ground plane +3.3V dc power for the receiver section Loss Signal Output. Active “Low” indicates a loss of receiving optical signal. Receiver Dataout Bar. See recommended circuit schematic Receiver Dataout. See recommended circuit schematic +3.3V dc power for the transmitter section Directly connect this plan to the transmitter ground plane Transmitter Shutdown Input. Active Low. Connect this pin to +3.3V TTL logic “0” to disable TX. This pin is internally pulled to “High”. Transmitter Data In. See recommended circuit schematic Transmitter Data In Bar. See recommended circuit schematic Mounting Studs. Connect to Chassis Ground TD+ TDMS ************************************************************************************************************************************************************************ OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 12/1/2004 V3.0 Optoway NU-33B55B-R/-P 4 *********************************************************************************************************************************************************************** RECOMMENDED CIRCUIT SCHEMATIC TX GND 7 Vcc 3.3V 8 BEN (LVTTL) Vcc 3.3V 130R LD Driver TX- 130R 10 Z=50R LVPECL TX+ 9 TX Vcc 6 Z=50R Vcc 3.3V 82R 1uH RX Vcc 10nF 10uF 10nF 10uF 82R 1uH 2 Vcc 3.3V TD+ RX+ 5 Z=50R Post Amp 100R RX- 4 LVPECL TD- Z=50R 3 SD (LVTTL) depend on customer's PHY RX GND 1 CDR or PHY DEVICE SFF ONU Module PACKAGE DIAGRAM Units in mm 1) SC Receptacle 49.40 4.91 3.48 9.80 max 1.78 13.59 max 29.82 10.16 11.98 ************************************************************************************************************************************************************************ OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 12/1/2004 V3.0 Optoway NU-33B55B-R/-P 5 *********************************************************************************************************************************************************************** 2) Pigtail 49.40 29.82 10.16 11.98 4.91 3.48 9.80 max 1.78 13.59 max 500±50 Note: Specifications subject to change without notice. ************************************************************************************************************************************************************************ OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 12/1/2004 V3.0