AXICOM Telecom-, Signal and RF Relays Signal Relays AXICOM Reed V23100-V4 Relay Reed Relay V23100 -V4 Coil Data (values at 23 °C) nDirect coil control with TTL-signals possible reliable switching nHigh switching rates nUltrasonic cleanable nHigh vibration and shock resistance Nominal voltage U nom nHighly Operate/set voltage range Minimum voltage U min Maximum voltage U max Vdc Vdc Vdc 5 12 15 24 3.5 8.4 10.5 16.8 14 25 47 47 5 12 15 24 3.5 8.4 10.5 16.8 14 25 47 47 5 12 Coil Data (continued) UL File No. 111441 Technical data of approved types on request form C Contact arrangement 1 form A (1 NO), 1 form C (CO) 2 form A (2 NO) Max. switching voltage at rated coil voltage 5VDC 200VDC/VACpeak 175VDC at rated coil voltage 12to 24VDC 200VDC/VACpeak 175VDCpeak Limiting continuous current 1A 1.2A Switching power 10W, 10VA 3W, 3VA Contact material Ruthenium Contact style reed contact Initial contact resistance <150mΩ Operate / release time max. 0.75/0.15ms 1.1/1.6ms Electrical endurance at 12V/10mA 50x106 operations at 24V/400mA 5x106 operations Magnetic system Coil voltage range Max. coil temperature Thermal resistance mW Ω/±1 0.75 1.80 2.25 3.60 125 288 112 288 20 50 200 200 0.75 1.80 2.25 3.60 125 288 112 288 20 50 200 200 125 288 112 Mini288 SIL 20 50 200 200 Z code DIP version SIL, high: 11 form 1 form with C 2 formand A electrostatic 1 form C shield 1 form A formAc contact, diode 1 form A with diode std,diode diode+ 5 3.5 14.5 0.75 125 shield 12 8.4 23.5 1.80 288 VDC VDC VDC VDC VDC VDC 15 10.5 14.5 2.25 112 05 22.0 14.0 13.0 14.0 14.5 13.6 24 16.8 49.0 3.60 288 12 33.0 25.0 22.0 25.0 23.5 21.6 15 44.0 47.0 44.0 47.0 14.5 24 44.0 47.0 44.0 47.0 49.0 - All figures are given for coil without pre-energization, at ambient temperature +23°C. Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. 20 50 200 200 All figures are given for coil without pre-energization, at ambient temperature +23°C UI = UII = The operat temperatur neutral 5 to 24VDC 105°C < 75K/W Coil versions, monostable Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10% mW 1 form A (1 NO) contact 05 5VDC 3.5 0.75 500 50 12 12VDC 8.4 1.80 1000 144 15 15VDC 10.5 2.25 2000 112 24 24VDC 16.8 3.60 2000 288 2 form A (2 NO) or 1 form C (1 CO) contact 05 5VDC 3.5 0.75 200 125 12 12VDC 8.4 1.80 500 288 15 15VDC 10.5 2.25 2000 112 24 24VDC 16.8 3.60 2000 288 08-2011, Rev. 0811 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Vdc 3.5 14.5 0.75 8.4 23.5 1.80 15 limiting operate 10.5 14.5 2.25 Coil versions, voltage 24flat, DIP16.8 49.0DIP high DIP 3.60high Coil DIP flat DIP high Approvals Coil Data Co Resista DIP version high: 2 form a contact, with diode DIP version high: 1 form c contact, with diode form A Coil power DIP version high: 2 form a contact, standard Typical applications Incircuit tester, measuring and control systems, telecom equipment, alarm and security equipment Contact Data Release/ reset voltage Minimum UI tamb = and UII tamb = tamb = UI tamb = UII tamb = kI , kII Ambient temperature tamb [°C] Coil operative range Coil operative range graphs UI UII UI tamb UII tamb tamb UI tamb UII tamb KI , KII Minimum voltage at 23°C after pre-energizing with rated voltage without contact current Maximum continous voltage at 23°C Consult Tyco Electronics for latest specifications. All specifications subject to change. The operating voltage limits UI and UII depend on the temperature according to the formula: KIxUI 23°C and KIlxUIl 23°C Ambient temperature Minimum voltage at ambient temperature, tamb Maximum voltage at ambient temperature, tamb Factors (dependent on temperature), see diagram Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 = 3.20L± 0.1 L 0.50W ± 0.1 W 0.25H± 0.1 H Hb T Tw Tz 19.3-0.2 Hb T Tw Tz 0.760 - 0.008 0.252 - 0.008 0.224 - 0.008 Dimensions in- mm 0.201 0.008 0.126 ± 0.004 0.020 ± 0.004 0.010 ± 0.004 Dimensions Dimensions DIP version Signal Relays(high) DIP version (high) AXICOM 5.7-0.2 3.2±0.1 0.5±0.1 5.1-0.2 0.5±0.1 3.2±0.1 7.5-0.2 5.1-0.2 Reed Reed V23100-V4 V23100-V4 Relay Relay Dimensions Dimensions SILSIL version version nal assignment Terminal Terminal assignment Terminal assignment assignment - 0.2 - 0.2 L L 19.80 19.80 1 form a- 0.2 5.08 5.08 - 0.2 W W 1 form 1 a form 1 form a version - 0.2 -a 0.2 7.80 7.80 H H DIP, flat with diode T T standard 3.50 3.50 ± 0.2 ± 0.2 standard standard TwTw1 form A 0.60 0.60 ± 0.1 ± 0.1 (NO) Tz Tz 0.25 0.25 ± 0.1 ± 0.1 standard A010 V23100-V4xxx-A000 A000 A000 A000 Mounting hole layout Mounting hole layout Dimensions Dimensions in in mm mm Top view Top view Terminal assignment version version Terminal assignment SILSIL mm mm TOP view component side of PCB Top view Top on view Top view inch inch Top view 0.780 0.780 - 0.008 - 0.008 10.200 form 1 form c 1 form a 0.200 -a 0.008 - 0.008 1 form1 aform 1 form a0.307 form 1 form a 1 aform 1 form a a 1 form 1 form a 1 cform 1 form c c 1 form 1 form a 1 aform 1 form a a 1 form c -a0.008 -10.008 0.307 with electrostatic standard with electrostatic 0.138 0.138 ± 0.008 ±standard 0.008 with diode with diode with diode with electrostatic with electrostatic with electrostatic with standard diodestandard standard with with electrostatic electrostatic with electrostatic with electrostatic standard AXICOM AXICOM shield diode shield ±and 0.004 ± 0.004 Telecom-, Signal RF Relays Telecom-, Signal andand RF Relays 1 form0.024 A 0.024 (NO) 1shield form A (NO) 1 form A (NO) 1 form C shield shield and diode and diode and diode shield shield andshield diode shield 0.010 0.010 ± 0.004 ± 0.004 with diode with electrostatic shield + diode with electrostatic shield Reed V23100-V4 Relay Reed V23100-V4 Relay C000 A010C000C000 A001 V23100-V4xxx-A001 A010V23100-V4xxx-A010 A010A011 A010 A000A011 A011V23100-V4xxx-A011 A011 C000 A011A001 A001A001 1 form a with electrostat 108-98011 Rev. 108-98011 Rev. C C (CO) shield standard V23100-V4xxx-C000 C000 A001 5.08-0.2 5.08-0.2 19.8-0.2 19.8-0.2 7.8-0.2 7.8-0.2 Dimensions Dimensions Mini SIL version Mini SIL version 14 13 3.5±0.2 3.5±0.2 ew a ard 5.1-0.2 5.1-0.2 7.5-0.2 3.2±0.1 3.2±0.1 3.2±0.1 0.5±0.1 3.2±0.1 3.2±0.1 5.1-0.2 5.7-0.2 5.7-0.2 DIP-high version DIP-high version 6.4-0.2 6.4-0.2 6.4-0.2 19.3-0.2 19.3-0.2 19.3-0.2 Reed Relay V23100 -V4 (Continued)6.4-0.2 inch 19.3-0.2 mm inch mm inch 0.760 - 0.008 0.760 - 0.008 L 19.30 - 0.2 L 0.760 - 0.008 19.30 - 0.2 0.276 - 0.008 7.00 - 0.2 7.00 - 0.2 0.276 - 0.008 W W 0.276 - 0.008 H H 0.295 - 0.008 0.295 - 0.008 7.50 - 0.2 7.50 - 0.2 0.295 - 0.008 Insulation Data Other Data form A C 0.5±0.1 0.200 ± 0.004 S 0.50 ± 0.1 S 0.200 ± 0.004 0.50 ± 0.1 0.200form ± 0.004 Initial0.126 dielectric strength 0.25±0.1 Material compliance: RoHS/ELV, Halogen ± 0.004 T 3.20 ± 0.1 T 0.126 ±EU 0.004 3.20 ± 0.1China RoHS, REACH, 0.126 ± 0.004content between refer Support Center at 0.020 ±open 0.004contacts Tw 0.50 ± 0.1 Tw 0.020 ± 0.004 0.50to±the 0.1Product Compliance 0.020 ± 0.004 0.5±0.1 0.5±0.1 0.5±0.1 0.010 DIP and SIL, 1 form A0.5±0.1 (NO), 2 form A (2 NO) 250VDC www.te.com/customersupport/rohssupportcenter ± 0.004 Tz 0.25 ± 0.1 Tz 0.010 ± 0.004 0.25 ± 0.1 0.010 ± 0.004 DIP, 1 form C (CO) 0.25±0.1 200VDC Ambient 0.25±0.1 temperature -40 to +85°C 0.25±0.1 0.25±0.1 Mini SIL, 1 form A (NO) 225VDC Category of environmental protection ting hole layout between contact and coil 1500VDC IEC 61810 RT-III - immersion cleanable 7.0-0.2 7.0-0.2 19.3-0.2 19.3-0.2 Initial insulation resistance at 500 VDC >109Ω Degree of protection,7.0-0.2 IEC 60529 IP67 ew Mounting Mounting Mounting hole layout hole hole layout layout Mounting hole layout Capacitance Vibration resistance (functional) 30g, 30g, between open contacts max. 1pF 10 to 2000Hz 50 to 2000Hz Top view Top view Top view Top view between contact and coil max. 2pF Shock resistance (functional), between adjacent contacts max. 1pF IEC 60068-2-27 (half sine),DIP and SIL 150g 50g Mini SIL 50g Terminal type PCB-THT Resistance to soldering heat THT IEC 60068-2-20 265 °C / 10 s AXICOM AXICOM Telecom-, Telecom-, Signal Signal andand RF Relays RF Relays 108-98011 108-98011 Rev. Rev. C C 0.5±0.1 0.5±0.1 5.7-0.2 DIP-high version 0.126 0.004 0.7600.760 - 0.2 19.30 - 0.2 -±0.2 - 0.008 - 0.008 - 0.008 L19.3019.30 L 0.760 19.30 - 0.2 0.004 0.2520.252 0.2 0.020 -6.40 0.2 -±0.2 - 0.008 - 0.008 - 0.008 6.40 - 0.2 W 6.40 -6.40 W 0.252 5.70 - 0.2 0.2 0.010 -5.70 0.2 -±0.2 - 0.008 - 0.008 - 0.008 H 5.70 -5.70 H 0.224 0.004 0.2240.224 mm 0.2 -5.10 0.2 - 0.2 Dimensions 0.2010.201 - 0.008 -in 0.008 - 0.008 Hb5.10 -5.10 Hb 0.201 5.10 - 0.2 0.1 ±3.20 0.1 ± 0.1 0.1260.126 ± 0.004 ± 0.004 ± 0.004 3.20 ± 0.1 T 3.20 ±3.20 T 0.126 0.1 ±0.50 0.1 ± 0.1 0.0200.020 ± 0.004 ± 0.004 ± 0.004 0.50 ± 0.1 Tw0.50 ±0.50 Tw 0.020 0.1 ±0.25 0.1 ± 0.1 ± 0.004 ± 0.004 ± 0.004 0.25 ± 0.1 Tz 0.25 ±0.25 Tz 0.010 6.4-0.20.0100.010 Terminal assignment 14 13 914813 14 13 9 8 9 8 Dimensions 9Dimensions 8 14 13 mm in in mm Terminal assignment 1 2 61 72 1 62 7 6 7 6 7 1 2 version SILSIL version mm inch mm inch Top view Top view 0.780 - 0.2 - 0.008 15.20 - 0.2 0.780 - 0.008 L L 15.20 0.25±0.1 0.25±0.1 3.80 - 0.2 0.200 -to0.008 3.80 - Consult 0.2 0.200 0.008 W Wsubject All specifications All specifications All specifications subject to change. subject to change. Consult to change. Tyco Consult Electronics TycoAll Electronics Tyco specifications for Electronics latest for specifications. latest subject for-specifications. latest change. specifications. Consult Tyco Electronics for latest specifications. 4 of 13 4 of 13 4 of 13 ifications subject to change. Consult Tyco Electronics for latest specifications. 4 of 13 2 form -a 0.2 -form 0.008c 6.80 -c0.2 -1 0.008 H H 1 form 1 form c a 1 form 2 form a c 1 form 2 6.80 form 2 form 0.307 a 0.307 2 form a c Tw 0.50 ± 0.1 0.024 ± 0.004 Tw 0.50 ± 0.1 0.024 ± 0.004 DIP, high version Mounting Mounting hole hole layout layout with diode diode diode with diode with with electrostatic diode standard with electrostatic withstandard withwith diode 0.25 ± 0.1 0.010 ± 0.004 Tz Tz 0.25 ± 0.1 0.010 ± 0.004 0.6±0.1 0.6±0.1 shield and diode 1 form C (CO) Top Top view view shield and diode 3.8-0.2 3.8-0.2 with electrostatic 15.2-0.2 15.2-0.2 shield + diode C011 B010 B000 V23100-V4xxx-C011 C011 2 form A (NO) standard C010 B000 V23100-V43xx-B000 2 form A (NO) with diode C010 B010 V23100-V43xx-B010 1 form 2 form c withwith elec shield an C011 B010 6.8-0.2 6.8-0.2 3.5±0.2 3.5±0.2 1 form C (CO) with diode C010 B010 V23100-V4xxx-C010 1 2 0.5±0.1 0.5±0.1 11.43 11.43 0.25±0.1 0.25±0.1 Mounting hole layout Mounting hole layout Terminal assignment assignment pecifications. ange. Terminal Consult Tyco Electronics for latest specifications. Top Top view view SIL version Top view Top view 1 form 1 form a a 1 form A (NO) standard standard standard V23100-V45xx-A000 A000 A000 Terminal assignment Terminal All specifications 6 of 13 subject to change. Consult All Tyco 6specifications ofElectronics 13assignment subject for latest to change. specifications. Consult Tyco Electronics for latest specification Top view Top view Mini SIL version 1 form 1 form a a 1 form A (NO) standard standard 1 form 1 form a a 1 diode form A (NO) with with diode standard V23100-V46xx-A000 A000 A000 with diode V23100-V45xx-A010 A010 A010 08-2011, Rev. 0811 www.te.com Nominal Nominal © 2011 Tyco Electronicsvoltage Corporation, voltage U nom U nom a TE Connectivity Ltd. company Datasheets and product specification Datasheets and product data is subject to the according tovoltage IEC 61810-1 and toRelease/ beRelease/ used termsCoil ofCoil the disclaimer and all chapters of Operate/set range Coil Operate/set voltage range Coil only together with the ‘Definitions’ section. ‘Definitions’ available at reset voltage thepower power section, Resistance reset voltage Resistance Minimum http://relays.te.com/definitions Minimum Maximum Minimum Maximum Minimum voltage U max voltage U min voltage U max voltage U min Vdc Vdc Vdc Vdc Vdc Vdc Vdc Vdc with diode V23100-V46xx-A010 A010 A010 8 of 8Information 13 ofInformation 13 Ordering Ordering Coil Data (values °C) Coil Data (values atat 2323 °C) All specifications All specifications subject subject to change. to change. Consult Consult Tyco Tyco Electronics Electronics for latest for latest specifications. specifications. 2 1 form 1 form a a 1 form A (NO) with diode with diode mW mW ± 10 Ω /Ω±/10 % % Datasheets, product data, ‘Definitions’ section, application notes and allTyco specifications Relay Tyco part Relay part are subject code to change. number code number 0.252 - 0.008 0.224 - 0.008 0.201 - 0.008 0.126 ± 0.004 0.020 ± 0.004 0.010 ± 0.004 Signal Relays 6.4-0.2 19.3-0.2 5.7-0.2 19.3-0.2 SIL version SIL version SIL version mm 19.80 - 0.2 5.08 - 0.2 7.80 - 0.2 3.50 ± 0.2 0.60 ± 0.1 0.25 ± 0.1 L W H T Tw Tz 6.4-0.2 L W inch H 0.780 - 0.008 Tw 0.200 - 0.008 Tz 0.307 - 0.008 0.138 ± 0.008 0.024 ± 0.004 0.010 ± 0.004 Reed Relay V23100 -V4 (Continued) 0.25±0.1 PCB layout TOP view on component side AXICOM of PCB TopDIP, view flat version 3.5±0.2 7.8-0.2 0.5±0.1 11.43 0.25±0.1 Telecom-, Signal and RF Relays Mounting hole layout TopDIP, view 108-98011 Rev. C high version Mini SIL version Top view AXICOM Top view Top vie Telecom-, Signal and RF Relays 1 form a standar Reed V23100-V4 Relay Dimensions in mm A000 Dimensions DIP version (flat) SIL version DIP flat version mm inch L 19.30 - 0.2 0.760 - 0.008 6.40 - 0.2 0.252 - 0.008 W Terminal assignment Terminal assignment 5.70 - 0.2 0.224 - 0.008 H AXICOM Top Hb view Top view Telecom-, Signal RF Relays 0.201 -and 0.008 5.10 - 0.2 3.20 ± 0.1 0.126 ± 0.004 T Dimensions 1 form a 1 form a 1 1form forma a 1 1form forma c 0.50 ± 0.1 0.020 ± 0.004 Tw Reed V23100-V4 Relay standard with diode standard with electrostatic with standard diode 0.25 ± 0.1 0.010 ± 0.004 Tz shield and diode DIP, flat versionA010 A000 A000 A011 Dimensions SIL version mm inch 0.780 - 0.008 19.80 - 0.2 (values at 23 °C) 5.08 - 0.2108-98011 0.200Data - 0.008 1 form a Rev. CCoil 7.80 - 0.2 with diode 0.307 - 0.008 1 form 1 form±a0.008 3.50 ± 0.2c 0.138 Nominal Operate/set voltage range A010 standard with electrostatic 0.60 ± 0.1 0.024 ± 0.004 voltage AXICOM shield 0.25 ± 0.1 0.010 ± 0.004 U nom Terminal assignment Top view L 1W form a standard H 1 1form forma a T A000 with withelectrostatic electrostatic Tw shield shieldand Tz diode A010 C000 A011 A001 6.4-0.2 19.3-0.2 SIL version Release/ reset voltage Minimum Coil power Re Vdc mW Ω 13.6 21.6 0.75 1.80 SIL version: with diode 1 2 1 form a contact 6 7 5 3.5 13.6 12 8.4 21.6 50 205 8 of 13 0.75 1.80 50 205 Telecom-, Signal and RF Relays C000 A001 Dimensions in Reed mm 19.8-0.2 14 13 DIP version (high) 9 8 V23100-V4 Relay Vdc Vdc 5.08-0.2 Vdc 14 13 Dimensions Maximum voltage U max Minimum voltage U min 9 8 SIL version: 1 form a contact 5 3.5 12 8.4 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3.2±0.1 5.1-0.2 1 2 6 7 DIP-high version Mini SIL version mm inch - 0.2Consult Tyco Electronics - 0.008 L 19.30 0.760 All specifications subject to change. Allfor specifications latest specifications. subject to change. Consult Tyco Electronics for latest specifications.4 0.6±0.1 of 13 0.5±0.1 7.00 0.276 - 0.008 W - 0.2 H - 0.008 7.50 - 0.2 0.295 0.25±0.1 mm S 0.50 ± 0.1 0.200 ± 0.004 L 15.20 - 0.2 T 3.20 ± 0.1 0.126 ± 0.004 3.80 - 0.2 W Tw 0.50 ± 0.1 0.020 ± 0.004 6.80 - 0.2 H Mounting hole layout Tz 0.25 ± 0.1 0.010 ± 0.004 Mounting hole layout Tw 0.50 ± 0.1 Top view Tz 0.25 ± 0.1 DIP, high version Mini SIL version 4 of 13 SIL version All specifications subject to change. Consult Tyco Electronics for latest specifications. Top view 7.0-0.2 3.8-0.2 0.25±0.1 inch 0.780 - 0.008 0.200 - 0.008 0.307 - 0.008 0.024 ± 0.004 0.010 ± 0.004 15.2-0.2 6.8-0.2 3.5±0.2 0.5±0.1 19.3-0.2 3.2±0.1 7.5-0.2 Termina Mounting hole layout SIL version Mounting hole layout Reed V23100-V4 Relay Dimensions 5.7-0.2 AXICOM 15.2-0.2 0.25±0.1 0.6±0.1 7.8-0.2 Mounting hole layout 5.1-0.2 5.1-0.2 0.5±0.1 3.2±0.1 3.2±0.1 0.25±0.1 inch 0.780 - 0.008 0.200 - 0.008 0.307 - 0.008 0.024 ± 0.004 0.010 ± 0.004 3.8-0.2 5.08-0.2 19.8-0.2 0.5±0.1 mm 15.20 - 0.2 3.80 - 0.2 6.80 - 0.2 0.50 ± 0.1 0.25 ± 0.1 3.5±0.2 5.7-0.2 6.40 - 0.2 5.70 - 0.2 5.10 - 0.2 3.20 ± 0.1 0.50 ± 0.1 0.25 ± 0.1 6.8-0.2 0.252 - 0.008 W 0.224 - 0.008 H 0.201 - 0.008 Hb 0.126 ± 0.004 T 0.020 ± 0.004 Tw 0.010 ± 0.004 Tz 3.5±0.2 6.40 - 0.2 5.70 - 0.2 5.10 - 0.2 3.20 ± 0.1 0.50 ± 0.1 0.25 ± 0.1 W H Hb T Tw Tz 0.5±0.1 0.5±0.1 0.25±0.1 Terminal assignment Mounting hole layout Mounting hole layout Terminal assignment Top view Top view 1 form a standard Top view Top view 1Product form a standard 11.43 code structure 1 form a with diode 1 form a with electrostatic shield and diode 1 form c standard Terminal assignment Top view 1 form a with diode Typical product 1 form a code V23100-V4 with electrostaticA010 A000 0 1 form a 05standard A0 5 12 08-2011, Rev. 0811 Datasheets and product specification www.te.com according to IEC 61810-1 and to be used © 2011 Tyco Electronics Corporation, only together with the ‘Definitions’ section. to change. Consult Tyco Electronics for latest specifications. aAllTEspecifications Connectivitysubject Ltd. company 3.5 8.4 13.6 21.6 SIL version: 1 form a contact with diode 5 3.5 13.6 12 and product 8.4data is subject 21.6to Datasheets the 1 form with dio A010 A000 shield Type V23100-V4 Reed Relay, V23100-V4 Series A000 A010 A011 C000 A001 Version 0 DIP flat, 1 form A (NO) contact or 1 form C (CO) contact without diode 14 13 9 8 3 DIP high, 2 form A (NO) or 1 form C (CO) contacts 5 SIL, 1 form A (NO) contact 6 Mini SIL, 1 form A (NO) contact Coil 1 2 6 7 All specifications subject to change. Consult Tyco Electronics for latest specifications. Coil code: please refer to coil versions table Terminal assignment Coil Data (values at 23 °C) 05 5VDC coil 15 15VDC coil All to change. specifications. 4 of 13 Top view12 subject specifications 12VDC coil Consult Tyco Electronics for latest 24 24VDC coil Nominal Operate/set voltage range Release/ Coil Contact arrangement 1 form c 2 form a 2 form a 1 form c voltage reset voltage power A0 1 form A (NO) contact, DIP flat or SIL package Uwith Minimum with diode standard with diode nom electrostatic B0 2 form A (NO) contacts, DIP high package Maximum shield andMinimum diode C0 1 form C (CO) contact, DIP high package voltage U min voltage U max Coil circuit Vdc Vdc Vdc Vdc mW C010 B000 B010 C011 00 Standard 10 With diode SIL version: 1 form a contact 11 With diode and electrostatic shield 10 Ordering I Coil Resistance Relay code Ω / ± 10 % 0.75 1.80 50 205 500 700 V23100-V4605-A0 V23100-V4612-A0 0.75 50 500 3 V23100-V4605-A0 1.80 205 data, ‘Definitions’ 700 Datasheets, product sec-V23100-V4612-A0 terms of the disclaimer and all chapters of tion, application notes and all specifications the at Tyco Electronics are subject change. All ‘Definitions’ specifications section, subject toavailable change. Consult for latesttospecifications. http://relays.te.com/definitions 6 of 13 Signal Relays AXICOM Reed Relay V23100 -V4 (Continued) 4 Product Code Version V23100-V4005-A000 DIP flat V23100-V4012-A000 V23100-V4015-A000 V23100-V4024-A000 V23100-V4005-A010 V23100-V4012-A010 V23100-V4015-A010 V23100-V4024-A010 V23100-V4305-C000 V23100-V4312-C000 V23100-V4315-C000 V23100-V4324-C000 V23100-V4005-A011 V23100-V4012-A011 V23100-V4015-A011 V23100-V4024-A011 V23100-V4305-B000 DIP high V23100-V4312-B000 V23100-V4315-B000 V23100-V4324-B000 V23100-V4305-B010 V23100-V4312-B010 V23100-V4315-B010 V23100-V4324-B010 V23100-V4305-C010 V23100-V4312-C010 V23100-V4315-C010 V23100-V4324-C010 V23100-V4305-C011 V23100-V4312-C011 V23100-V4315-C011 V23100-V4324-C011 V23100-V4505-A000 SIL V23100-V4512-A000 V23100-V4515-A000 V23100-V4524-A000 V23100-V4505-A010 V23100-V4512-A010 V23100-V4515-A010 V23100-V4524-A010 V23100-V4605-A000 Mini SIL V23100-V4612-A000 V23100-V4605-A010 V23100-V4612-A010 08-2011, Rev. 0811 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Coil Arrangement Diode/shield 5VDC 1 form A (NO) Standard 12VDC 15VDC 24VDC 5VDC Diode 12VDC 15VDC 24VDC 5VDC 1 form C (CO) Standard 12VDC 15VDC 24VDC 5VDC 1 form A (NO) Diode and shield 12VDC 15VDC 24VDC 5VDC 2 form A (NO) Standard 12VDC 15VDC 24VDC 5VDC Diode 12VDC 15VDC 24VDC 5VDC 1 form C (CO) 12VDC 15VDC 24VDC 5VDC Diode and shield 12VDC 15VDC 24VDC 5VDC 1 form A (NO) Standard 12VDC 15VDC 24VDC 5VDC Diode 12VDC 15VDC 24VDC 5VDC Standard 12VDC 5VDC Diode 12VDC Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Part number 1393763-1 1393763-6 1-1393763-0 1-1393763-4 1393763-4 1393763-8 1-1393763-2 1-1393763-6 2-1393763-0 2-1393763-8 3-1393763-4 4-1393763-0 1393763-3 1393763-9 1-1393763-3 1-1393763-7 1-1393763-8 2-1393763-6 3-1393763-2 3-1393763-8 1-1393763-9 2-1393763-7 3-1393763-3 3-1393763-9 2-1393763-2 3-1393763-0 3-1393763-6 4-1393763-2 2-1393763-3 3-1393763-1 3-1393763-7 4-1393763-3 4-1393763-4 4-1393763-7 4-1393763-9 5-1393763-1 4-1393763-5 4-1393763-8 5-1393763-0 5-1393763-2 1422026-2 1422026-3 1422026-5 1422026-6 Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.