ETC 18-140

COMMERCIAL
Barrier Blocks
Circular Mini DIN
BNC
Jones Plugs
Edge Connectors
Commercial
[.050” (1.27mm) Density
Solder Introduction
Cup/Wire
D-Microminiature]
Cinch Commercial Products, consisting of Jones Plugs and Sockets, Barrier Blocks, Edge Cards, Two-Piece Commercial Dins,
Mini Din Plugs, and their newest addition the 75Ω Press-Fit BNC Receptacle, provide a wide variety of connectors for the
purchaser and designer to chose from.
The Jones Plugs and Sockets have been utilized for decades and provide a quick, reliable, and economical means of solving
your higher current-carrying capacity needs. Available in two series (300 and 2,400), these connectors can be found in data
processing controls; amusement and vending machines; medical, communication, and test equipment; as well as industrial
controls and heavy-duty, battery-powered equipment. Both series are available in a variety of cable and panel
mounting options.
Cinch Barrier Blocks are designed to simplify wiring work by reducing splicing, preventing current leaks and short circuits, and
increasing insulation. Available in a variety of densities, these barrier blocks can be found in applications ranging from industrial
controls to switching systems.
Designed specially for applications where space is at a premium, the Cinch Mini Din family is ideal for personal computers,
keyboard-mouse interface, hand-held electronic equipment, office-automation equipment, and audio and video equipment.
Available in sizes 3 through 8 contact, the Cinch Mini Din family includes a fully shielded cable mounted plug in various cable
lengths or cable mounted plug components for customers with high-volume assembly and overmold capabilities.
Cinch Edge Card Connectors are available in a variety of styles on both .100 or .156 center spacing.
The newest addition to the commercial family, the 75Ω Press-Fit BNC Receptacle is designed around a unique patented press-fit
design that allows for multiple insertion into a backplane without loss of mechanical retention or electrical performance.
When looking for time reliability to solve your commercial interconnect needs, look no further than Cinch Connectors.
Whether it's a Jones Plug and Socket, Barrier Block, Edge Card, Mini Din plug, or our newest addition,
the 75Ω BNC Press-Fit connector, you will always know years of customer satisfaction stand behind the product you chose.
2-1
Call Toll Free: 1 (800) 323-9612
2
Barrier Blocks
■ A wide variety of barrier blocks makes it possible to select the combination of mechanical and
electrical characteristics that best meet the exact requirements of your application.
MATERIALS
■ A wide selection of optional terminals and fanning strips permits the equipment designer to
choose the method of termination most suitable for his environmental specifications and
manufacturing requirements.
Insulation Material: Molded monoblock, general purpose
phenolic, black, UL Rated 94V-1
Eyelets: Material - Brass
Plating - Nickel
Screws: Material - Steel
Plating - Nickel over copper flash
Solder Terminals: Material - Brass
Plating - Electro-Tin
Marker Strip Material: Nema Grade XPC, UL Rated 94V-O
ENVIRONMENTAL
FEATURES
■ Interposing barriers between terminals yield higher electrical ratings and provide additional
protection against frayed wire shorting.
Operating Temperature: -55° to +300°F
Certifications: UL Recognized - File E61245
CSA - LR 31996
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-2
Barrier Blocks
TERMINAL BLOCK QUICK REFERENCE
Center-to- Number Single or
Center
of
Double Screw
Series Spacing Terminals
Row
Size
Operating
Voltage
Current
Rating
Max.
Wire
Size
Max.
Watts/
Terminal
Voltage
Voltage
Rating
Rating
w/Marker w/o Marker
Marker
Strip
Mounting
140
.375
1-25
Double
5-40
250 Volts
15 Amps
#16
3750
2000
1100
Bottom
141
.438
1-20
Double
6-32
250 Volts
20 Amps
#14
5000
2400
1100
Bottom
142
.563
1-17
Double
8-32
250 Volts
30 Amps
#10
7500
2600
1600
Bottom
150
.688
1-10
Double
10-32
250 Volts
40 Amps
#10
10,000
2400
1500
Bottom
151
.875
1-8
Double
12-32
250 Volts
50 Amps
#8
12,500
3400
1800
Bottom
152
1.125
1-6
Double
1/4-28
250 Volts
70 Amps
#6
54,000
3800
2100
Bottom
164
.375
1-21
Double
6-32
250 Volts
15 Amps
#14
3750
2000
1100
Bottom
540
.375
2-31
Double
5-40
600 Volts
15 Amps
#16
3750
2300
2300
Top
541
.438
2-30
Double
6-32
600 Volts
20 Amps
#14
5000
2800
2800
Top
542
.563
2-26
Double
8-32
600 Volts
30 Amps
#10
7500
4000
4000
Top
176
.375
2-10
Single
5-40
250 Volts
15 Amps
#16
3750
N/A
1100
N/A
Marketed exclusively through distribution.
2-3
Call Toll Free: 1 (800) 323-9612
.375 Density, 5-40 x 3/16"
BH Screw, Open Bottom,
Double Row
Barrier Blocks
Series 140
Electrical Characteristics
Voltage Rating: 250 VAC RMS maximum
Current Rating: 15 Amps maximum
Maximum Watts Per Terminal: 3750
Mechanical Characteristics
Maximum Wire Size: #16 AWG
Recommended Tightening Torque: 9 lb.-in.
Dimensions
Ordering Information
No. of
Standard Screw
Terminals
Catalog No.
1
1-140
2
2-140
3
3-140
4
4-140
5
5-140
6
6-140
7
7-140
8
8-140
9
9-140
10
10-140
11
11-140
12
12-140
13
13-140
14
14-140
15
15-140
16
16-140
17
17-140
18
18-140
19
19-140
20
20-140
21
21-140
22
22-140
23
23-140
24
24-140
25
25-140
Call Toll Free: 1 (800) 323-9612
2-4
“M”
Dim.
.750
1.125
1.500
1.875
2.250
2.625
3.000
3.375
3.750
4.125
4.500
4.875
5.250
5.625
6.000
6.375
6.750
7.125
7.500
7.875
8.250
8.625
9.000
9.375
9.750
“L”
Dim.
1.032
1.407
1.782
2.157
2.532
2.907
3.282
3.657
4.032
4.407
4.782
5.157
5.532
5.907
6.282
6.657
7.032
7.407
7.782
8.157
8.532
8.907
9.282
9.657
10.032
Marketed exclusively through distribution.
Barrier Blocks
Series 140
.375 Density, 5-40 x 3/16"
BH Screw, Open Bottom,
Double Row
Solder Terminal Options
Dimensions
“Y” Terminals
“3/4W” Terminals
“W” Terminals
Ordering Information
No. of
Terminals
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Catalog No.
1-140-Y
2-140-Y
3-140-Y
4-140-Y
5-140-Y
6-140-Y
7-140-Y
8-140-Y
9-140-Y
10-140-Y
11-140-Y
12-140-Y
13-140-Y
14-140-Y
15-140-Y
16-140-Y
17-140-Y
18-140-Y
19-140-Y
20-140-Y
21-140-Y
22-140-Y
23-140-Y
24-140-Y
25-140-Y
Catalog No.
1-140-3/4W
2-140-3/4W
3-140-3/4W
4-140-3/4W
5-140-3/4W
6-140-3/4W
7-140-3/4W
8-140-3/4W
9-140-3/4W
10-140-3/4W
11-140-3/4W
12-140-3/4W
13-140-3/4W
14-140-3/4W
15-140-3/4W
16-140-3/4W
17-140-3/4W
18-140-3/4W
19-140-3/4W
20-140-3/4W
21-140-3/4W
22-140-3/4W
23-140-3/4W
24-140-3/4W
25-140-3/4W
Catalog No.
1-140-W
2-140-W
3-140-W
4-140-W
5-140-W
6-140-W
7-140-W
8-140-W
9-140-W
10-140-W
11-140-W
12-140-W
13-140-W
14-140-W
15-140-W
16-140-W
17-140-W
18-140-W
19-140-W
20-140-W
21-140-W
22-140-W
23-140-W
24-140-W
25-140-W
Solder Terminals can be ordered separately.
Terminal Type
“Y”
“3/4W”
“W”
Catalog No.
Y-140
3/4W-140
W-140
Marketed exclusively through distribution.
2-5
Call Toll Free: 1 (800) 323-9612
.375 Density, 5-40 x 3/16"
BH Screw, Open Bottom,
Double Row
Barrier Blocks
Series 140
Marker Strips
Dimensions
Standard
“Y” Terminal
2
Ordering Information
No. of
Terminals
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Catalog No.
MS-1-140
MS-2-140
MS-3-140
MS-4-140
MS-5-140
MS-6-140
MS-7-140
MS-8-140
MS-9-140
MS-10-140
MS-11-140
MS-12-140
MS-13-140
MS-14-140
MS-15-140
MS-16-140
MS-17-140
MS-18-140
MS-19-140
MS-20-140
MS-21-140
MS-22-140
MS-23-140
MS-24-140
MS-25-140
Catalog No.
MS-1-140-Y
MS-2-140-Y
MS-3-140-Y
MS-4-140-Y
MS-5-140-Y
MS-6-140-Y
MS-7-140-Y
MS-8-140-Y
MS-9-140-Y
MS-10-140-Y
MS-11-140-Y
MS-12-140-Y
MS-13-140-Y
MS-14-140-Y
MS-15-140-Y
MS-16-140-Y
MS-17-140-Y
MS-18-140-Y
MS-19-140-Y
MS-20-140-Y
MS-21-140-Y
MS-22-140-Y
MS-23-140-Y
MS-24-140-Y
MS-25-140-Y
Use Standard Marker Strips for “3/4W” and “W” Solder Terminals.
Accessories
• Jumpers
• Fanning Strips
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-6
.438 Density, 6-32 x 1/4"
BH Screw, Open Bottom,
Double Row
Barrier Blocks
Series 141
Electrical Characteristics
Voltage Rating: 250 VAC RMS maximum
Current Rating: 20 Amps maximum
Maximum Watts Per Terminal: 5000
Mechanical Characteristics
Maximum Wire Size: #14 AWG
Recommended Tightening Torque: 12 lb.-in.
Dimensions
Ordering Information
No. of
Terminals
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Standard Screw
Catalog No.
1-141
2-141
3-141
4-141
5-141
6-141
7-141
8-141
9-141
10-141
11-141
12-141
13-141
14-141
15-141
16-141
17-141
18-141
19-141
20-141
“M”
Dim.
.875
1.312
1.750
2.187
2.625
3.062
3.500
3.938
4.375
4.813
5.250
5.687
6.125
6.562
7.000
7.437
7.875
8.312
8.750
9.187
“L”
Dim.
1.187
1.625
2.062
2.500
2.938
3.375
3.812
4.250
4.687
5.125
5.562
6.000
6.437
6.875
7.312
7.750
8.187
8.625
9.062
9.500
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-8
.438 Density, 6-32 x 1/4"
BH Screw, Open Bottom,
Double Row
Barrier Blocks
Series 141
Solder Terminal Options
Dimensions
“Y” Terminals
“3/4W” Terminals
“W” Terminals
Ordering Information
No. of
Terminals
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Catalog No.
1-141-Y
2-141-Y
3-141-Y
4-141-Y
5-141-Y
6-141-Y
7-141-Y
8-141-Y
9-141-Y
10-141-Y
11-141-Y
12-141-Y
13-141-Y
14-141-Y
15-141-Y
16-141-Y
17-141-Y
18-141-Y
19-141-Y
20-141-Y
Catalog No.
1-141-3/4W
2-141-3/4W
3-141-3/4W
4-141-3/4W
5-141-3/4W
6-141-3/4W
7-141-3/4W
8-141-3/4W
9-141-3/4W
10-141-3/4W
11-141-3/4W
12-141-3/4W
13-141-3/4W
14-141-3/4W
15-141-3/4W
16-141-3/4W
17-141-3/4W
18-141-3/4W
19-141-3/4W
20-141-3/4W
Catalog No.
1-141-W
2-141-W
3-141-W
4-141-W
5-141-W
6-141-W
7-141-W
8-141-W
9-141-W
10-141-W
11-141-W
12-141-W
13-141-W
14-141-W
15-141-W
16-141-W
17-141-W
18-141-W
19-141-W
20-141-W
Solder Terminals can be ordered separately.
Terminal Type
“Y”
“3/4W”
“W”
Catalog No.
Y-141
3/4W-141
W-141
Marketed exclusively through distribution.
2-9
Call Toll Free: 1 (800) 323-9612
DURA-CON®
Barrier Blocks
High Reliability
Series 141
All-Plastic
.438 Density, 6-32 x 1/4"
BH Screw, Open Bottom,
Double Row
Marker Strips
Dimensions
Standard
“Y” Terminal
2
Ordering Information
No. of
Terminals
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Catalog No.
MS-1-141
MS-2-141
MS-3-141
MS-4-141
MS-5-141
MS-6-141
MS-7-141
MS-8-141
MS-9-141
MS-10-141
MS-11-141
MS-12-141
MS-13-141
MS-14-141
MS-15-141
MS-16-141
MS-17-141
MS-18-141
MS-19-141
MS-20-141
Catalog No.
MS-1-141-Y
MS-2-141-Y
MS-3-141-Y
MS-4-141-Y
MS-5-141-Y
MS-6-141-Y
MS-7-141-Y
MS-8-141-Y
MS-9-141-Y
MS-10-141-Y
MS-11-141-Y
MS-12-141-Y
MS-13-141-Y
MS-14-141-Y
MS-15-141-Y
MS-16-141-Y
MS-17-141-Y
MS-18-141-Y
MS-19-141-Y
MS-20-141-Y
Use Standard Marker Strip for “3/4W” and “W” Solder Terminals.
Accessories
• Jumpers
• Fanning Strips
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-10
Barrier Blocks
Series 142
.563 Density, 8-32 x 5/16"
BH Screw, Open Bottom,
Double Row
Electrical Characteristics
Voltage Rating: 250 VAC RMS maximum
Current Rating: 30 Amps maximum
Maximum Watts Per Terminal: 7500
Mechanical Characteristics
Maximum Wire Size: #10 AWG
Recommended Tightening Torque: 16 lb.-in.
Dimensions
Ordering Information
No. of
Terminals
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Standard Screw
Catalog No.
1-142
2-142
3-142
4-142
5-142
6-142
7-142
8-142
9-142
10-142
11-142
12-142
13-142
14-142
15-142
16-142
17-142
“M”
Dim.
1.125
1.687
2.250
2.812
3.375
3.937
4.500
5.062
5.625
6.187
6.750
7.312
7.875
8.437
9.000
9.562
10.125
“L”
Dim.
1.531
2.094
2.656
3.219
3.781
4.344
4.906
5.468
6.031
6.594
7.156
7.719
8.281
8.844
9.406
9.969
10.531
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-12
Barrier Blocks
Series 142
.563 Density, 8-32 x 5/16"
BH Screw, Open Bottom,
Double Row
Solder Terminal Options
Dimensions
“Y” Terminals
“3/4W” Terminals
“W” Terminals
Ordering Information
No. of
Terminals
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Catalog No.
1-142-Y
2-142-Y
3-142-Y
4-142-Y
5-142-Y
6-142-Y
7-142-Y
8-142-Y
9-142-Y
10-142-Y
11-142-Y
12-142-Y
13-142-Y
14-142-Y
15-142-Y
16-142-Y
17-142-Y
Catalog No.
1-142-3/4W
2-142-3/4W
3-142-3/4W
4-142-3/4W
5-142-3/4W
6-142-3/4W
7-142-3/4W
8-142-3/4W
9-142-3/4W
10-142-3/4W
11-142-3/4W
12-142-3/4W
13-142-3/4W
14-142-3/4W
15-142-3/4W
16-142-3/4W
17-142-3/4W
Catalog No.
1-142-W
2-142-W
3-142-W
4-142-W
5-142-W
6-142-W
7-142-W
8-142-W
9-142-W
10-142-W
11-142-W
12-142-W
13-142-W
14-142-W
15-142-W
16-142-W
17-142-W
Solder Terminals can be ordered separately.
Terminal Type
“Y”
“3/4W”
“W”
Catalog No.
Y-142
3/4W-142
W-142
Marketed exclusively through distribution.
2-13
Call Toll Free: 1 (800) 323-9612
DURA-CON®
Barrier Blocks
High Reliability
Series 142
All-Plastic
.563 Density, 8-32 x 5/16"
BH Screw, Open Bottom,
Double Row
Marker Strips
Dimensions
Standard
“Y” Terminal
2
Ordering Information
No. of
Terminals
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Catalog No.
MS-1-142
MS-2-142
MS-3-142
MS-4-142
MS-5-142
MS-6-142
MS-7-142
MS-8-142
MS-9-142
MS-10-142
MS-11-142
MS-12-142
MS-13-142
MS-14-142
MS-15-142
MS-16-142
MS-17-142
Catalog No.
MS-1-142-Y
MS-2-142-Y
MS-3-142-Y
MS-4-142-Y
MS-5-142-Y
MS-6-142-Y
MS-7-142-Y
MS-8-142-Y
MS-9-142-Y
MS-10-142-Y
MS-11-142-Y
MS-12-142-Y
MS-13-142-Y
MS-14-142-Y
MS-15-142-Y
MS-16-142-Y
MS-17-142-Y
Use Standard Marker Strips for “3/4W” and “W” Solder Terminals.
Accessories
•
•
Jumpers
Fanning Strips
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-14
.688 Density, 10-32 x 5/16"
BH Screw, Open Bottom,
Double Row
Barrier Blocks
Series 150
Electrical Characteristics
Voltage Rating: 250 VAC RMS maximum
Current Rating: 40 Amps maximum
Maximum Watts Per Terminal: 10,000
Mechanical Characteristics
Maximum Wire Size: #10 AWG
Recommended Tightening Torque: 20 lb.-in.
Dimensions
Ordering Information
No. of
Terminals
1
2
3
4
5
6
7
8
9
10
Standard Screw
Catalog No.
1-150
2-150
3-150
4-150
5-150
6-150
7-150
8-150
9-150
10-150
Y-Terminals
Catalog No.
1-150-Y
2-150-Y
3-150-Y
4-150-Y
5-150-Y
6-150-Y
7-150-Y
8-150-Y
9-150-Y
10-150-Y
“M”
Dim.
1.375
2.062
2.750
3.437
4.125
4.812
5.500
6.187
6.875
7.562
“L”
Dim.
1.812
2.500
3.187
3.875
4.562
5.250
5.938
6.625
7.312
8.000
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-16
Barrier Blocks
Series 150
.688 Density, 10-32 x 5/16"
BH Screw, Open Bottom,
Double Row
Marker Strips
Dimensions
Standard
“Y” Terminal
.688
TYP
(17.46)
Ordering Information
No. of
Terminals
1
2
3
4
5
6
7
8
9
10
Catalog No.
MS-1-150
MS-2-150
MS-3-150
MS-4-150
MS-5-150
MS-6-150
MS-7-150
MS-8-150
MS-9-150
MS-10-150
Catalog No.
MS-1-150-Y
MS-2-150-Y
MS-3-150-Y
MS-4-150-Y
MS-5-150-Y
MS-6-150-Y
MS-7-150-Y
MS-8-150-Y
MS-9-150-Y
MS-10-150-Y
Accessories
None Available for 150 Series.
Marketed exclusively through distribution.
2-17
Call Toll Free: 1 (800) 323-9612
.875 Density, 12-32 x 3/8"
BH Screw, Open Bottom,
Double Row
Barrier Blocks
Series 151
Electrical Characteristics
Voltage Rating: 250 Volts maximum
Current Rating: 50 Amps maximum
Maximum Watts Per Terminal: 12,500
Mechanical Characteristics
Maximum Wire Size: #8
Recommended Tightening Torque: 40 lb.-in.
Dimensions
Ordering Information
No. of
Terminals
1
2
3
4
5
6
7
8
Catalog No.
1-151
2-151
3-151
4-151
5-151
6-151
7-151
8-151
“M”
Dim. (in)
1.750
2.625
3.500
4.375
5.250
6.125
7.000
7.875
“L”
Dim. (in)
2.282
3.157
4.032
4.907
5.782
6.657
7.532
8.407
Marker Strip
Catalog No.
N/A
MS-2-151
MS-3-151
MS-4-151
MS-5-151
MS-6-151
MS-7-151
MS-8-151
Solder Terminals can be ordered separately.
Terminal Type
“W”
Catalog No.
W-151
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-18
1.25 Density, 1/4-28 x 1/2"
BH Screw, Open Bottom,
Double Row
Barrier Blocks
Series 152
Electrical Characteristics
Voltage Rating: 250 Volts maximum
Current Rating: 70 Amps maximum
Maximum Watts Per Terminal: 54,000
Mechanical Characteristics
Maximum Wire Size: #6
Recommended Tightening Torque: 75 lb.-in.
Dimensions
Ordering Information
No. of
Terminals
1
2
3
4
5
6
Catalog No.
1-152
2-152
3-152
4-152
5-152
6-152
“M”
Dim. (in)
2.250
3.375
4.500
5.625
6.750
7.875
“L”
Dim. (in)
2.876
4.001
5.126
6.251
7.376
8.501
Marker Strip
Catalog No.
N/A
MS-2-152
MS-3-152
MS-4-152
MS-5-152
MS-6-152
Accessories
None Available for 152 Series.
Marketed exclusively through distribution.
2-19
Call Toll Free: 1 (800) 323-9612
Barrier Blocks
Series 164
.375 Density, 6-32 x 5/16"
BH Screw, Open Bottom,
Double Row
Electrical Characteristics
Voltage Rating: 250 Volts maximum
Current Rating: 15 Amps maximum
Maximum Watts Per Terminal: 3750
Mechanical Characteristics
Maximum Wire Size: #14
Recommended Tightening Torque: 12 lb.-in.
Dimensions
Ordering Information
No. of
Terminals
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
“M”
Dim. (in)
0.750
1.125
1.500
1.875
2.250
2.625
3.000
3.375
3.750
4.125
4.500
4.875
5.250
5.625
6.000
6.375
6.750
7.125
7.500
7.875
8.250
Catalog No.
1-164
2-164
3-164
4-164
5-164
6-164
7-164
8-164
9-164
10-164
11-164
12-164
13-164
14-164
15-164
16-164
17-164
18-164
19-164
20-164
21-164
“L”
Dim. (in)
1.032
1.407
1.782
2.157
2.532
2.907
3.282
3.657
4.032
4.407
4.782
5.157
5.532
5.907
6.282
6.657
7.032
7.407
7.782
8.157
8.532
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-20
Barrier Blocks
Series 164
.375 Density, 6-32 x 1/4"
BH Screw, Open Bottom,
Double Row
Solder Terminal Options
Dimensions
“Y” Terminals
“3/4W” Terminals
“W” Terminals
Ordering Information
No. of
Terminals
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Catalog No.
1-164-Y
2-164-Y
3-164-Y
4-164-Y
5-164-Y
6-164-Y
7-164-Y
8-164-Y
9-164-Y
10-164-Y
11-164-Y
12-164-Y
13-164-Y
14-164-Y
15-164-Y
16-164-Y
17-164-Y
18-164-Y
19-164-Y
20-164-Y
21-164-Y
Catalog No.
1-164-3/4W
2-164-3/4W
3-164-3/4W
4-164-3/4W
5-164-3/4W
6-164-3/4W
7-164-3/4W
8-164-3/4W
9-164-3/4W
10-164-3/4W
11-164-3/4W
12-164-3/4W
13-164-3/4W
14-164-3/4W
15-164-3/4W
16-164-3/4W
17-164-3/4W
18-164-3/4W
19-164-3/4W
20-164-3/4W
21-164-3/4W
Catalog No.
1-164-W
2-164-W
3-164-W
4-164-W
5-164-W
6-164-W
7-164-W
8-164-W
9-164-W
10-164-W
11-164-W
12-164-W
13-164-W
14-164-W
15-164-W
16-164-W
17-164-W
18-164-W
19-164-W
20-164-W
21-164-W
Marketed exclusively through distribution.
2-21
Call Toll Free: 1 (800) 323-9612
DURA-CON®
Barrier Blocks
High Reliability
Series 164
All-Plastic
[.050”
.375 (1.27mm)
Density, 6-32
Density
x 1/4"
Solder
BH Screw,
Cup/Wire
Open Bottom,
D-Microminiature]
Double Row
Marker Strips
Dimensions
Standard
“Y” Terminal
2
Ordering Information
No. of
Terminals
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Catalog No.
N/A
MS-2-140
MS-3-140
MS-4-140
MS-5-140
MS-6-140
MS-7-140
MS-8-140
MS-9-140
MS-10-140
MS-11-140
MS-12-140
MS-13-140
MS-14-140
MS-15-140
MS-16-140
MS-17-140
MS-18-140
MS-19-140
MS-20-140
MS-21-140
Catalog No.
N/A
MS-2-140-Y
MS-3-140-Y
MS-4-140-Y
MS-5-140-Y
MS-6-140-Y
MS-7-140-Y
MS-8-140-Y
MS-9-140-Y
MS-10-140-Y
MS-11-140-Y
MS-12-140-Y
MS-13-140-Y
MS-14-140-Y
MS-15-140-Y
MS-16-140-Y
MS-17-140-Y
MS-18-140-Y
MS-19-140-Y
MS-20-140-Y
MS-21-140-Y
Use Standard Marker Strips for “3/4W” and “W” Solder Terminals.
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-22
.375 Density, 5-40 x 1/4"
BH Screw, Closed Bottom,
Double Row
Barrier Blocks
Series 540
Electrical Characteristics
Voltage Rating: 600 Volts maximum
Current Rating: 15 Amps
Maximum Watts Per Terminal: 3750
Mechanical Characteristics
Maximum Wire Size: #16
Recommended Tightening Torque: 9 lb.-in.
Dimensions
Ordering Information
No. of
Terminals
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Catalog No.
2-540
3-540
4-540
5-540
6-540
7-540
8-540
9-540
10-540
11-540
12-540
13-540
14-540
15-540
16-540
17-540
18-540
19-540
20-540
21-540
22-540
23-540
24-540
25-540
26-540
27-540
28-540
29-540
30-540
31-540
“M”
Dim. (in)
1.125
1.500
1.875
2.250
2.625
3.000
3.375
3.750
4.125
4.500
4.875
5.250
5.625
6.000
6.375
6.750
7.125
7.500
7.875
8.250
8.625
9.000
9.375
9.750
10.125
10.500
10.875
11.250
11.625
12.000
“L”
Dim. (in)
1.407
1.782
2.157
2.532
2.907
3.282
3.657
4.032
4.407
4.782
5.157
5.532
5.907
6.282
6.657
7.032
7.407
7.782
8.157
8.532
8.907
9.282
9.657
10.032
10.407
10.782
11.157
11.532
11.907
12.282
Marker Strip
Catalog No.
MSX-2-540
MSX-3-540
MSX-4-540
MSX-5-540
MSX-6-540
MSX-7-540
MSX-8-540
MSX-9-540
MSX-10-540
MSX-11-540
MSX-12-540
MSX-13-540
MSX-14-540
MSX-15-540
MSX-16-540
MSX-17-540
MSX-18-540
MSX-19-540
MSX-20-540
MSX-21-540
MSX-22-540
MSX-23-540
MSX-24-540
MSX-25-540
MSX-26-540
MSX-27-540
MSX-28-540
MSX-29-540
MSX-30-540
MSX-31-540
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-24
.438 Density, 6-32 x 1/4"
BH Screw, Closed Bottom,
Double Row
Barrier Blocks
Series 541
Electrical Characteristics
Voltage Rating: 600 Volts maximum
Current Rating: 20 Amps
Maximum Watts Per Terminal: 5000
Mechanical Characteristics
Maximum Wire Size: #14
Recommended Tightening Torque: 12 lb.-in.
Dimensions
Ordering Information
No. of
Terminals
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Catalog No.
2-541
3-541
4-541
5-541
6-541
7-541
8-541
9-541
10-541
11-541
12-541
13-541
14-541
15-541
16-541
17-541
18-541
19-541
20-541
21-541
22-541
23-541
24-541
25-541
26-541
27-541
28-541
29-541
30-541
“M”
Dim. (in)
1.314
1.752
2.190
2.628
3.066
3.504
3.942
4.380
4.818
5.256
5.694
6.132
6.570
7.008
7.446
7.884
8.322
8.760
9.198
9.636
10.074
10.512
10.950
11.388
11.826
12.264
12.702
13.140
13.578
“L”
Dim. (in)
1.626
2.064
2.502
2.940
3.378
3.816
4.254
4.692
5.130
5.568
6.006
6.444
6.882
7.320
7.758
8.196
8.634
9.072
9.510
9.948
10.386
10.824
11.262
11.700
12.138
12.576
13.014
13.452
13.890
Marker Strip
Catalog No.
MSX-2-541
MSX-3-541
MSX-4-541
MSX-5-541
MSX-6-541
MSX-7-541
MSX-8-541
MSX-9-541
MSX-10-541
MSX-11-541
MSX-12-541
MSX-13-541
MSX-14-541
MSX-15-541
MSX-16-541
MSX-17-541
MSX-18-541
MSX-19-541
MSX-20-541
MSX-21-541
MSX-22-541
MSX-23-541
MSX-24-541
MSX-25-541
MSX-26-541
MSX-27-541
MSX-28-541
MSX-29-541
MSX-30-541
Marketed exclusively through distribution.
2-25
Call Toll Free: 1 (800) 323-9612
.563 Density, 8-32 x 5/16"
BH Screw, Closed Bottom,
Double Row
Barrier Blocks
Series 542
Electrical Characteristics
Voltage Rating: 600 Volts maximum
Current Rating: 30 Amps
Maximum Watts Per Terminal: 7500
Mechanical Characteristics
Maximum Wire Size: #10
Recommended Tightening Torque: 16 lb.-in.
Dimensions
Ordering Information
No. of
Terminals
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Catalog No.
2-542
3-542
4-542
5-542
6-542
7-542
8-542
9-542
10-542
11-542
12-542
13-542
14-542
15-542
16-542
17-542
18-542
19-542
20-542
21-542
22-542
23-542
24-542
25-542
26-542
“M”
Dim. (in)
1.689
2.252
2.815
3.378
3.941
4.504
5.067
5.630
6.193
6.756
7.319
7.882
8.445
9.008
9.571
10.134
10.697
11.260
11.823
12.386
12.949
13.512
14.075
14.638
15.201
“L”
Dim. (in)
2.095
2.658
3.221
3.784
4.347
4.910
5.473
6.036
6.599
7.162
7.725
8.288
8.851
9.414
9.977
10.540
11.103
11.666
12.229
12.792
13.355
13.918
14.481
15.044
15.607
Marker Strip
Catalog No.
MSX-2-542
MSX-3-542
MSX-4-542
MSX-5-542
MSX-6-542
MSX-7-542
MSX-8-542
MSX-9-542
MSX-10-542
MSX-11-542
MSX-12-542
MSX-13-542
MSX-14-542
MSX-15-542
MSX-16-542
MSX-17-542
MSX-18-542
MSX-19-542
MSX-20-542
MSX-21-542
MSX-22-542
MSX-23-542
MSX-24-542
MSX-25-542
MSX-26-542
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-26
.375 Density, 5-40 x 3/16"
BH Screw, Dip Solder,
Single Row
Barrier Blocks
Series 176
Electrical Characteristics
Voltage Rating: 250 Volts maximum
Current Rating: 15 Amps maximum
Maximum Watts Per Terminal: 3750
Mechanical Characteristics
Maximum Wire Size: 16 AWG
Recommended Tightening Torque: 16 lb.-in.
Dimensions
L
M
Ordering Information
No. of
Terminals
2
3
4
5
6
7
8
9
10
No. of
Terminals
2
3
4
5
6
7
8
9
10
11
12
With Mounting Ears
Catalog No.
Catalog No.
.125 Tail Lgth
.184 Tail Lgth
2-176-2
2-176-3
3-176-2
3-176-3
4-176-2
4-176-3
5-176-2
5-176-3
6-176-2
6-176-3
7-176-2
7-176-3
8-176-2
8-176-3
9-176-2
9-176-3
10-176-2
10-176-3
“M”
Dimension
1.125
1.500
1.875
2.250
2.625
3.000
3.375
3.375
4.125
Without Mounting Ears
Catalog No.
Catalog No.
.125 Tail Lgth
.184 Tail Lgth
2-176-2A
2-176-3A
3-176-2A
3-176-3A
4-176-2A
4-176-3A
5-176-2A
5-176-3A
6-176-2A
6-176-3A
7-176-2A
7-176-3A
8-176-2A
8-176-3A
9-176-2A
9-176-3A
10-176-2A
10-176-3A
11-176-2A
11-176-3A
12-176-2A
12-176-3A
“L”
Dimension
1.469
1.844
2.219
2.594
2.969
3.344
3.719
4.094
4.469
“L”
Dimension
.719
1.094
1.469
1.844
2.219
2.594
2.969
3.344
3.719
4.094
4.469
Marketed exclusively through distribution.
2-27
Call Toll Free: 1 (800) 323-9612
DURA-CON®
Barrier Blocks
High Reliability
Accessories
All-Plastic
Solder Terminals
3/4W, Y, and W
Optional Terminals for use with Cinch terminal blocks.
See chart for type and dimensions. (Below)
2
Ordering Information
"3/4 W" Terminals - Dimensions
Catalog
A
Number
in
mm
3/4W-140 .953 24.21
3/4W-141 1.156 29.36
3/4W-142 1.422 36.11
B
in
.719
.680
.797
C
mm
18.20
17.27
20.24
in
.312
.422
.500
mm
12.70
15.88
18.64
in
.136
.152
.177
mm
19.05
23.83
27.79
in
.312
.422
.500
D
mm
7.92
10.72
12.70
in
.062
.078
.094
E
mm
1.57
1.98
2.39
in
.146
.152
.177
D
in
mm
.593 15.06
.781 19.83
.906 23.01
in
.093
.125
.125
F
mm
3.71
3.86
4.50
in
.094
.125
.125
mm
2.36
3.18
3.18
in
.091
.103
.126
mm
3.71
3.86
4.50
in
.094
.125
.125
mm
2.39
3.18
3.18
"Y" Terminals - Dimensions
Catalog
Number
Y-140
Y-141
Y-142
A
in
.281
.312
.421
B
mm
7.14
7.92
10.69
in
.500
.625
.734
C
mm
3.45
3.86
4.50
E
F
mm
2.31
2.62
3.20
"W" Terminals - Dimensions
Catalog
Number
W-140
W-141
W-142
A
in
1.219
1.563
1.875
B
mm
30.96
39.70
47.63
in
.750
.938
1.094
C
D
mm
7.92
10.72
12.70
in
.063
.078
.094
E
mm
1.60
1.98
2.39
in
.146
.152
.177
F
mm
2.39
3.18
3.18
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-28
Barrier Blocks
Accessories
Quick Clamp Terminals
Simplifies engaging of wires to barrier blocks.
Wire is inserted into flared opening and screw
is tightened. Screws are brass binder head
type with nickel plating. Terminals are brass
with tin plating. Includes two mating clamps
and one screw.
QC-1
Shown
Ordering Information
Barrier Block
Series
141, 541
142, 542
Catalog No.
QC-1
QC-2
Screw
Size
6-32x5/16"
8-32x3/8"
Wire Gauge
Range AWG
12 thru 22
10 thru 16
Jumpers
For connecting between adjacent terminals
or alternate terminals. All jumpers are
brass with nickel plating.
Ordering Information
Barrier Block
Series
140
141
141
142
142, 542
142, 542
540
541
542
Type
A
B
F
F
D
E
C
C
C
Catalog No.
140J-1
141J-1
141J
95B
142J-1*
142J-2
540J
541J
542J
Type A
Type B
Type C
Type E
Type F
* Connects two alternate terminals
Type D
Marketed exclusively through distribution.
2-29
Call Toll Free: 1 (800) 323-9612
2
Barrier Block
Accessories
Fanning Strips
MATERIALS
FEATURES
■ Minimize wiring errors.
■ Available in straight and right-angle styles.
■ Available with cable clamp hole on right or left side, designated
by “L” or “R” at end of catalog number.
■ Cable clamp hole for securing cable/wires with lacing twine
or ty-wrap.
Insulation Material: UL 94HB rated XPC, chocolate
Contact Material: Brass
Contact Plating: Cadmium
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-30
Barrier Block
Accessories
Fanning Strips
Catalog Numbers and Dimensions for Fanning Strips for 140 Series Terminal Blocks
Straight Type
Dimensions
Catalog No. 6-160B-R
Catalog No. 6-160-R
Ordering Information
No. of
Terminals
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Catalog No.
2-160-R
3-160-R
4-160-R
5-160-R
6-160-R
7-160-R
8-160-R
9-160-R
10-160-R
11-160-R
12-160-R
13-160-R
14-160-R
15-160-R
16-160-R
17-160-R
18-160-R
19-160-R
20-160-R
21-160-R
Catalog No.
2-160-L
3-160-L
4-160-L
5-160-L
6-160-L
7-160-L
8-160-L
9-160-L
10-160-L
11-160-L
12-160-L
13-160-L
14-160-L
15-160-L
16-160-L
17-160-L
18-160-L
19-160-L
20-160-L
21-160-L
Catalog No.
2-160B-R
3-160B-R
4-160B-R
5-160B-R
6-160B-R
7-160B-R
8-160B-R
9-160B-R
10-160B-R
11-160B-R
12-160B-R
13-160B-R
14-160B-R
15-160B-R
16-160B-R
17-160B-R
18-160B-R
19-160B-R
20-160B-R
21-160B-R
Catalog No.
2-160B-L
3-160B-L
4-160B-L
5-160B-L
6-160B-L
7-160B-L
8-160B-L
9-160B-L
10-160B-L
11-160B-L
12-160B-L
13-160B-L
14-160B-L
15-160B-L
16-160B-L
17-160B-L
18-160B-L
19-160B-L
20-160B-L
21-160B-L
Marketed exclusively through distribution.
2-31
Call Toll Free: 1 (800) 323-9612
DURA-CON®
Barrier Block
High Reliability
Accessories
All-Plastic
Fanning
Fanning
Strips
Strips
Catalog Numbers and Dimensions for Fanning Strips for 140 Series Terminal Blocks, Continued
Right-Angle Type
Dimensions
2
Catalog No. 6-160A-R
Ordering Information
No. of
Terminals
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Catalog No.
2-160A-R
3-160A-R
4-160A-R
5-160A-R
6-160A-R
7-160A-R
8-160A-R
9-160A-R
10-160A-R
11-160A-R
12-160A-R
13-160A-R
14-160A-R
15-160A-R
16-160A-R
17-160A-R
18-160A-R
19-160A-R
20-160A-R
21-160A-R
Catalog No.
2-160A-L
3-160A-L
4-160A-L
5-160A-L
6-160A-L
7-160A-L
8-160A-L
9-160A-L
10-160A-L
11-160A-L
12-160A-L
13-160A-L
14-160A-L
15-160A-L
16-160A-L
17-160A-L
18-160A-L
19-160A-L
20-160A-L
21-160A-L
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-32
Barrier Block
Accessories
Fanning Strips
Catalog Numbers and Dimensions for Fanning Strips for 141 Series Terminal Blocks
Straight Type
Dimensions
No. of
Terminals
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Catalog No.
2-161-R
3-161-R
4-161-R
5-161-R
6-161-R
7-161-R
8-161-R
9-161-R
10-161-R
11-161-R
12-161-R
13-161-R
14-161-R
15-161-R
16-161-R
17-161-R
18-161-R
19-161-R
20-161-R
Catalog No.
2-161-L
3-161-L
4-161-L
5-161-L
6-161-L
7-161-L
8-161-L
9-161-L
10-161-L
11-161-L
12-161-L
13-161-L
14-161-L
15-161-L
16-161-L
17-161-L
18-161-L
19-161-L
20-161-L
2
Catalog No. 5-161-R
Right-Angle Type
Dimensions
No. of
Terminals
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Catalog No.
2-161A-R
3-161A-R
4-161A-R
5-161A-R
6-161A-R
7-161A-R
8-161A-R
9-161A-R
10-161A-R
11-161A-R
12-161A-R
13-161A-R
14-161A-R
15-161A-R
16-161A-R
17-161A-R
18-161A-R
19-161A-R
20-161A-R
Catalog No.
2-161A-L
3-161A-L
4-161A-L
5-161A-L
6-161A-L
7-161A-L
8-161A-L
9-161A-L
10-161A-L
11-161A-L
12-161A-L
13-161A-L
14-161A-L
15-161A-L
16-161A-L
17-161A-L
18-161A-L
19-161A-L
20-161A-L
Catalog No. 5-161A-R
Marketed exclusively through distribution.
2-33
Call Toll Free: 1 (800) 323-9612
Barrier Block
Accessories
Fanning Strips
Catalog Numbers and Dimensions for Fanning Strips for 142 Series Barrier Blocks
Straight Type
Ordering Information
No. of
Terminals
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Catalog No.
2-162-R
3-162-R
4-162-R
5-162-R
6-162-R
7-162-R
8-162-R
9-162-R
10-162-R
11-162-R
12-162-R
13-162-R
14-162-R
15-162-R
16-162-R
17-162-R
Dimensions
Catalog No.
2-162-L
3-162-L
4-162-L
5-162-L
6-162-L
7-162-L
8-162-L
9-162-L
10-162-L
11-162-L
12-162-L
13-162-L
14-162-L
15-162-L
16-162-L
17-162-L
Catalog No. 5-162-R
Right-Angle Type
Dimensions
Ordering Information
No. of
Terminals
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Catalog No.
2-162A-R
3-162A-R
4-162A-R
5-162A-R
6-162A-R
7-162A-R
8-162A-R
9-162A-R
10-162A-R
11-162A-R
12-162A-R
13-162A-R
14-162A-R
15-162A-R
16-162A-R
17-162A-R
Catalog No.
2-162A-L
3-162A-L
4-162A-L
5-162A-L
6-162A-L
7-162A-L
8-162A-L
9-162A-L
10-162A-L
11-162A-L
12-162A-L
13-162A-L
14-162A-L
15-162A-L
16-162A-L
17-162A-L
Catalog No. 5-162A-R
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-34
Barrier Block
Accessories
Lug-Type Terminal Strips
Materials
Insulation Material: UL 94 HB rated XPC, chocolate
Contact Material: Steel
Contact Plating: Cadmium
Mechanical Characteristics
Mounting Hole: .140" (3.56mm) diameter
Strip Dimension: .0625" (1.59mm) thick x .375" (9.53mm) wide
Lug Density: .375" (9.53mm)
Ordering Information
Mounting
Catalog No. Centers
51
51A
51B
51C
51F
51L
51R
52
52A
52B
52C
52R
53
1.500 (38.10)
53A
1.500 (38.10)
53B
.750 (19.05)
53C
.750 (19.05)
53E
53F
54
1.875 (47.63)
54A
1.875 (47.63)
54B
54C
55
2.250 (57.15)
55A
2.250 (57.15)
55B
1.500 (38.10)
55C
1.500 (38.10)
56
2.625 (66.68)
56A
2.625 (66.68)
56B
1.875 (47.63)
56C
1.875 (47.63)
1
1
1
2
4
1/2
3
1
1
1
2
4
1
2
4
1
1
1
1
2
4
1
1
2
4
1
1
2
4
1
1
Lug Type Used In Position
2 3 4 5
6
7 8
2
4
1
1
1
3
2
4
1
1
1
1
1
2
4
2
4
1
1
1
1
1
1
2
4
1
1
2
4
1
1
1
1
3
1
1
1
1
1
1
1
1
2
4
1
1
1
1
1
1
1
1
1
1
2
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
4
1
1
2
4
1
1
1
1
2
4
1
1
1
1
2
4
2
4
1
1
Dimensions
Marketed exclusively through distribution.
2-35
Call Toll Free: 1 (800) 323-9612
Jones
Plugs/Sockets
Series 300
Multiple Density
Solder Eyelet
■ Solder lug terminals with .093" x .062" (2.36mm x 1.57mm) wiring holes.
■ Two-contact "Jones" connector is round, all others are rectangular.
■ For use in cable-to-panel and cable-to-cable applications.
FEATURES
■ Designed for light and medium duty.
■ Plug prongs are .156" (3.96mm) wide and .047" (1.19mm) thick.
■ Polarized to prevent wrong-way insertion.
■ Plugs have projecting flat blades, sockets have recessed twin bellows.
■ Cable clamps of zinc and clear irridite-plated steel used for strain relief.
■ UL Recognized-file E170218 (UL 1977), E130965 (UL1863).
■ CSA-LR31996.
■ See Panel Cutout dimension on page (2-38).
MATERIALS
Insulation Material: Molded monoblock, general purpose
phenolic, black UL94V-1
Contact Material: Plug: Brass
Socket: Phosphor bronze
Contact Plating: Cadmium
Operating Temperature: Up to +105°C
ELECTRICAL
Hood Material: UL 94V-0 rated thermoplastic
Operating Voltage:
Current Rating:
Contact Resistance:
250 VAC RMS maximum
10 Amps
16 Milliohms maximum
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-36
Jones
Plugs/Sockets
Series 300
Multiple Density
Solder Eyelet
Polarizing Patterns - 300 Series
Marketed exclusively through distribution.
2-37
Call Toll Free: 1 (800) 323-9612
Jones
DURA-CON®
Plugs/Sockets
High Reliability
Series
All-Plastic
300
Multiple Density
Solder Eyelet
Mounting Dimensions
A
Reference
2
in
B
mm
in
1.016
C
mm
D
in
mm
in
mm
25.81
.750
19.05
-
-
303
.453
11.51
304
.719
18.26
.781
19.84
1.000
25.40
-
-
306
.719
18.26
1.031
26.19
1.000
25.40
-
-
308
.719
18.26
1.281
32.54
1.000
25.40
-
-
310
.719
18.26
1.578
40.08
1.000
25.40
-
-
312
.953
24.21
1.266
32.16
1.250
31.75
-
-
315-12
.953
24.21
1.516
38.51
1.250
31.75
-
-
315
1.016
25.81
1.641
41.68
1.375
34.93
-
-
318
1.016
25.81
1.953
49.61
1.375
34.93
.625
15.88
321
1.016
25.81
2.266
57.56
1.375
34.93
.469
11.91
324
1.016
25.81
2.578
65.48
1.375
34.93
.625
15.88
327
1.016
25.81
2.891
73.43
1.375
34.93
.781
19.84
330
1.016
25.81
3.203
81.36
1.375
34.93
.938
23.83
333
1.016
25.81
3.516
89.31
1.375
34.93
1.094
27.79
NOTE: For 300 Series 2 through 33 contact angle bracket connectors. All mounting holes are .156" (3.96mm) dia. Maximum chassis
thickness is .063" (1.59mm) for bottom mounting. Mounting holes are located on center line unless otherwise shown.
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-38
Jones
Plugs/Sockets
Series 300
No. of
Contacts
2
3
4
6
8
10
12
15*
15
18
21
24
27
30
33
[.050”
Multiple
(1.27mm)
Density Density
Solder
SolderCup/Wire
Eyelet With Angle
D-Microminiature]
Bracket/Less Angle Bracket
With Angle Bracket
Catalog No.
Catalog No.
Plug
Socket
P-302-AB
S-302-AB
P-303-AB
S-303-AB
P-304-AB
S-304-AB
P-306-AB
S-306-AB
N/A
N/A
P-310-AB
N/A
P-312-AB
N/A
N/A
S-315-12-AB
P-315-AB
S-315-AB
P-318-AB
S-318-AB
P-321-AB
S-321-AB
P-324-AB
S-324-AB
P-327-AB
S-327-AB
P-330-AB
S-330-AB
P-333-AB
S-333-AB
Less Angle Bracket
Catalog No.
Catalog No.
Plug
Socket
P-302-LAB
S-302-LAB
P-303-LAB
S-303-LAB
P-304-LAB
S-304-LAB
P-306-LAB
S-306-LAB
N/A
N/A
P-310-LAB
N/A
P-312-LAB
N/A
N/A
S-315-12-LAB
P-315-LAB
S-315-LAB
P-318-LAB
S-318-LAB
P-321-LAB
S-321-LAB
P-324-LAB
S-324-LAB
P-327-LAB
S-327-LAB
P-330-LAB
S-330-LAB
P-333-LAB
S-333-LAB
No. of
Contacts
2
3
4
6
8
10
12
15
15
18
21
24
27
30
33
X = length of plug contacts. This dimension does not apply to sockets.
Y = length of plug or socket tails.
No. of
Contacts
2
3
4
6
8
10
12
15*
A
in
.656
1.000
.750
1.000
-1.562
1.250
1.500
B
mm
in
16.67
25.40
19.05
25.40
-39.69
31.75
38.10
.438
.688
.688
-.688
.938
.938
C
mm
11.11
17.46
17.46
-17.46
23.81
23.81
D
in
mm
in
mm
.969
.750
1.000
1.000
-1.000
1.250
1.250
24.61
19.05
25.40
25.40
-25.40
31.75
31.75
1.219
1.062
1.312
1.312
-1.312
1.562
1.562
30.96
26.99
33.34
33.34
-33.34
39.69
39.69
*Special 15 contact arrangement to allow 12-position mating.
L
Reference
15
18
21
24
27
30
33
M
in
mm
1.625
1.938
2.250
2.563
2.875
3.188
3.500
41.28
49.23
57.15
65.10
73.03
80.98
88.90
in
See note
1.250
.938
1.250
1.562
1.875
2.188
Polarizing
Pin
mm
31.75
23.81
31.75
39.69
47.63
55.58
NO
NO
NO
14
14
14
17
NOTE: 15-position plug and socket require only two mounting brackets, mounted on center of connector.
Marketed exclusively through distribution.
2-39
Call Toll Free: 1 (800) 323-9612
2
Jones
DURA-CON®
Plugs/Sockets
High Reliability
Series
All-Plastic
300
[.050”
Multiple
(1.27mm)
Density
Density
Solder
Solder
Cup/Wire
Eyelet
D-Microminiature]
Flush Plate
300 Series with Flush Plate (FP)
2
No. of
Catalog No.
Catalog No.
Contacts
Plug
Socket
2
P-302-FP
S-302-FP
3
P-303-FP
S-303-FP
4
P-304-FP
S-304-FP
6
P-306-FP
S-306-FP
8
N/A
N/A
10
P-310-FP
N/A
12
P-312-FP
N/A
NOTE: Not available in contact sizes 15-33.
X = length of plug contacts. This dimension does not apply to sockets.
Y = length of plug or socket tails.
Dimensions - Plug or Socket
No. of
Contacts
2
3
4
6
8
10
12
A
in
2.063
2.063
2.063
2.063
-2.563
2.563
B
mm
52.40
52.40
52.40
52.40
-65.10
65.10
in
1.250
1.250
1.250
1.250
-1.750
1.750
C
mm
31.75
31.75
31.75
31.75
-44.45
44.45
in
1.750
1.750
1.750
1.750
-2.250
2.250
D
mm
44.45
44.45
44.45
44.45
-57.15
57.15
in
.938
.688
.938
-1.500
1.188
mm
23.81
17.46
23.81
-38.10
30.16
E Max.
in
mm
.719
18.26
.500
12.70
.750
19.05
.750
19.05
--.750
19.05
1.000
25.40
Panel Cutout Dimensions
A
Reference
303-FP
304-FP
306-FP
308-FP
310-FP
312-FP
in
.953
.703
.953
-1.516
1.203
B
mm
24.21
17.86
24.21
-38.51
30.56
in
.516
.766
.766
-.766
1.016
C
mm
13.11
19.46
19.46
-19.46
25.81
in
1.750
1.750
1.750
-2.250
2.250
mm
44.45
44.45
44.45
-57.15
57.15
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-40
Jones
Plugs/Sockets
Series 300
[.050” Multiple
(1.27mm)
Density
Density
Solder Solder
Cup/Wire
Eyelet
D-Microminiature]
End Brackets
300 Series with End Brackets (EB)
No. of
Contacts
15
18
21
24
28
30
33
Catalog No.
Plug
P-315-EB
P-318-EB
P-321-EB
P-324-EB
P-328-EB
P-330-EB
P-333-EB
Catalog No.
Socket
S-315-EB
S-318-EB
S-321-EB
S-324-EB
S-328-EB
S-330-EB
S-333-EB
2
NOTE: Not available in contact sizes 2-12.
X = length of plug contacts. This dimension does not apply to sockets.
Y = length of plug or socket tails.
Dimensions
No. of
Contacts
15
18
21
24
27
30
33
L
± .031 (.79mm)
2.313
58.75
2.625
66.68
2.938
74.63
3.250
82.55
3.563
90.50
3.875
98.43
4.188
106.38
M
± .031 (.79mm)
2.000
50.80
2.313
58.75
2.625
66.68
2.938
74.63
3.250
82.55
3.563
90.50
3.875
98.43
P
± .063 (1.59mm)
1.625
41.28
1.938
49.23
2.250
57.15
2.563
65.10
2.875
73.03
3.188
80.98
3.500
88.90
Polarizing
Pin
NO
NO
NO
14
14
14
17
Panel Cutout Dimensions
A
Reference
315-EB
318-EB
321-EB
324-EB
327-EB
330-EB
333-EB
in
1.641
1.953
2.266
2.578
2.891
3.203
3.516
B
mm
41.68
49.61
57.56
65.48
73.43
81.36
89.31
in
1.016
1.016
1.016
1.016
1.016
1.016
1.016
C
mm
25.81
25.81
25.81
25.81
25.81
25.81
25.81
in
2.000
2.313
2.625
2.938
3.250
3.563
3.875
mm
50.80
58.75
66.68
74.63
82.55
90.50
98.43
Marketed exclusively through distribution.
2-41
Call Toll Free: 1 (800) 323-9612
Jones
DURA-CON®
Plugs/Sockets
High Reliability
Series
All-Plastic
300
Multiple Density
Solder Eyelet
Recessed Plate
300 Series with Recessed Plate (RP)
2
No. of
Contacts
2
3
4
6
8
10
12
Catalog No.
Plug
P-302-RP
P-303-RP
P-304-RP
P-306-RP
N/A
P-310-RP
P-312-RP
Catalog No.
Socket
S-302-RP
S-303-RP
S-304-RP
S-306-RP
N/A
N/A
N/A
NOTE: Not available in contact sizes 15-33.
Y = length of plug or socket tails.
Dimensions
No. of
Contacts
2
3
4
6
8
10
12
A
in
2.063
2.063
2.063
2.063
-2.563
2.563
B
mm
52.40
52.40
52.40
52.40
-65.10
65.10
in
1.500
1.500
1.500
1.500
-2.000
2.000
C
mm
38.10
38.10
38.10
38.10
-50.80
50.80
in
1.750
1.750
1.750
1.750
-2.250
2.250
mm
44.45
44.45
44.45
44.45
-57.15
57.15
D Max.
in
mm
1.350
34.29
1.350
34.29
1.350
34.29
1.350
34.29
--1.850
46.99
1.850
46.99
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-42
Jones
Plugs/Sockets
Series 300
[.050” Multiple
(1.27mm)
Density
Density
Solder Solder
Cup/Wire
Eyelet
D-Microminiature]
Shallow Bracket
300 Series with Shallow Bracket (SB)
No. of
Contacts
15
18
21
24
27
30
33
Catalog No.
Plug
P-315-SB
P-318-SB
P-321-SB
P-324-SB
P-327-SB
P-330-SB
P-333-SB
Catalog No.
Socket
S-315-SB
S-318-SB
S-321-SB
S-324-SB
S-327-SB
S-330-SB
S-333-SB
2
NOTE: Not available in contact sizes 2-12.
X = length of plug contacts. This dimension
does not apply to sockets.
Y = length of plug or socket tails.
Dimensions
No. of
Polarizing
Contacts
15
18
21
24
27
30
33
A
± .031 (.79mm)
in
mm
1.688
42.86
2.000
50.80
2.313
58.75
2.625
66.68
2.938
74.63
3.250
82.55
3.563
90.50
M
± .031 (.79mm)
in
mm
2.125
53.98
2.438
61.93
2.750
69.85
2.063
52.40
3.375
85.73
3.688
93.68
4.000
101.60
L
± .063 (1.59mm)
in
mm
2.547
64.69
2.859
72.62
3.172
80.57
3.484
88.49
3.797
96.44
4.109
104.38
4.422
112.32
Polarizing
Pin
NO
NO
NO
14
14
14
17
Panel Cutout Dimensions
A
Reference
315-SB
318-SB
321-SB
324-SB
327-SB
330-SB
333-SB
in
1.750
2.063
2.375
2.688
3.000
3.313
3.625
B
mm
44.45
52.40
60.33
68.28
76.20
84.15
92.08
in
1.156
1.156
1.156
1.156
1.156
1.156
1.156
C
mm
29.36
29.36
29.36
29.36
29.36
29.36
29.36
in
2.125
2.438
2.750
3.062
3.376
3.688
4.000
mm
53.98
61.93
69.85
77.77
85.75
93.68
101.60
Marketed exclusively through distribution.
2-43
Call Toll Free: 1 (800) 323-9612
Jones
DURA-CON®
Plugs/Sockets
High Reliability
Series
All-Plastic
300
[.050”
Multiple
(1.27mm)
Density
Density
Solder
Solder
Cup/Wire
Eyelet
D-Microminiature]
Deep Bracket
300 Series Deep Bracket (DB)
2
No. of
Contacts
2
3
4
6
8
10
12
15
18
21
24
27
30
33
Catalog No.
Plug
P-302-DB
P-303-DB
P-304-DB
P-306-DB
N/A
N/A
P-312-DB
P-315-DB
P-318-DB
P-321-DB
P-324-DB
P-327-DB
P-330-DB
P-333-DB
Catalog No.
Socket
S-302-DB
S-303-DB
S-304-DB
S-306-DB
N/A
N/A
N/A
S-315-DB
S-318-DB
S-321-DB
S-324-DB
S-327-DB
S-330-DB
S-333-DB
Dimensions
Y = length of plug or socket tails.
L
± .063 (1.60mm)
in
mm
2.813
71.44
3.125
79.38
3.437
87.31
3.750
95.25
4.063 103.19
4.375 111.13
4.688 119.06
No. of
Contacts
15
18
21
24
27
30
33
M
± .031 (.79mm)
in
mm
2.375
60.33
2.688
68.28
3.000
76.20
3.313
84.15
3.625
92.08
3.938
100.03
4.250
107.95
Polarizing
Pin
NO
NO
NO
14
14
14
17
Panel Cutout Dimensions
A
Reference
302-DB thru
312-DB
315-DB
318-DB
321-DB
324-DB
327-DB
330-DB
333-DB
B
C
in
mm
in
mm
in
mm
1.453
2.000
2.313
2.625
2.938
3.250
3.562
3.875
36.91
50.80
58.75
66.68
74.63
82.55
90.47
98.43
1.125
1.438
1.438
1.438
1.438
1.438
1.438
1.438
28.58
36.53
36.53
36.53
36.53
36.53
36.53
36.53
1.750
2.376
2.688
3.000
3.312
3.626
3.938
4.250
38.10
60.35
68.28
76.20
84.12
92.10
100.03
107.95
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-44
Jones
Plugs/Sockets
Series 300
[.050” Multiple
(1.27mm)
Density
Density
Solder Solder
Cup/Wire
Eyelet
With Hood & 90° Clamp
D-Microminiature]
300 Series with Hood and 90° Cable Clamp (CCE)
No. of
Contacts
2
3
4
6
8
10
12
15
18
21
24
27
30
33
Catalog No.
Plug
P-302-CCE
P-303-CCE
P-304-CCE
P-306-CCE
N/A
P-310-CCE
P-312-CCE
P-315-CCE
P-318-CCE
P-321-CCE
P-324-CCE
P-327-CCE
P-330-CCE
P-333-CCE
Catalog No.
Socket
S-302-CCE
S-303-CCE
S-304-CCE
S-306-CCE
N/A
N/A
N/A
S-315-CCE
S-318-CCE
S-321-CCE
S-324-CCE
S-327-CCE
S-330-CCE
S-333-CCE
2
Dimensions
No. of
Contacts
2
3
4
6
8
10
12
A +.016
(.41mm)
in
mm
.691
17.55
1.034
26.26
.786
19.96
1.036
26.31
--1.592
40.44
1.286
32.66
No. of
Contacts
15
18
21
24
27
30
33
B +.016
(.41mm)
in
mm
.472
11.99
.724
18.39
.724
18.39
--.720
18.29
.974
24.74
C +.031
(.79mm)
in
mm
.953
24.21
.953
24.21
.953
24.21
.078
27.38
--1.203
30.56
1.203
30.56
E
in
2.514
2.826
3.139
3.451
3.764
4.076
4.389
L
mm
63.85
71.78
79.73
87.66
95.61
103.53
111.48
in
1.795
2.107
2.420
2.732
3.045
3.357
3.670
mm
45.59
53.52
61.47
69.39
77.34
85.27
93.22
G
in
.313
.344
.453
.469
-.359
.422
mm
7.95
8.74
11.51
11.91
-9.12
10.72
Cable Opening
in
mm
.563
14.30
.563
14.30
.625
15.88
.625
15.88
.625
15.88
.750
19.05
.750
19.05
Cable "D"
Opening
in
mm
.313
7.95
.250
6.35
.375
9.53
.438
11.13
--.500
12.70
.563
14.30
Polarizing
Pin
NO
NO
NO
14
14
14
17
Marketed exclusively through distribution.
2-45
Call Toll Free: 1 (800) 323-9612
Jones
DURA-CON®
Plugs/Sockets
High Reliability
Series
All-Plastic
300
[.050”
(1.27mm)
Density
Multiple
Density
Solder
Eyelet
Solder
Cup/Wire
With Hood & 180° Clamp
D-Microminiature]
300 Series with Hood and 180° Cable Clamp (CCT)
2
No. of
Contacts
2
3
4
6
8
10
12
15
18
21
24
27
30
33
Catalog No.
Plug
P-302-CCT
P-303-CCT
P-304-CCT
P-306-CCT
N/A
P-310-CCT
P-312-CCT
P-315-CCT
P-318-CCT
P-321-CCT
P-324-CCT
P-327-CCT
P-330-CCT
P-333-CCT
Catalog No.
Socket
S-302-CCT
S-303-CCT
S-304-CCT
S-306-CCT
N/A
N/A
N/A
S-315-CCT
S-318-CCT
S-321-CCT
S-324-CCT
S-327-CCT
S-330-CCT
S-333-CCT
Dimensions
No. of
Contacts
2
3
4
6
8
10
12
A ± .016
(.41mm)
in
mm
.691
17.55
1.034
26.26
.786
19.96
1.036
26.31
--1.592
40.44
1.286
32.66
No. of
Contacts
15
18
21
24
27
30
33
B ± .016
(.41mm)
in
mm
.472
11.99
.724
18.39
.724
18.39
--.720
18.29
.974
24.74
L
in
1.795
2.107
2.420
2.732
3.045
3.357
3.670
mm
45.59
53.52
61.47
69.39
77.34
85.27
93.22
C ± .031
(.79mm)
in
mm
.953
24.21
.953
24.21
.953
24.21
1.078
27.38
--1.203
30.56
1.203
30.56
Cable Opening
in
mm
.563
14.30
.563
14.30
.625
15.88
.625
15.88
.625
15.88
.750
19.05
.750
19.05
“D” Cable
Opening
in
mm
.375
9.53
.313
7.95
.375
9.53
.438
11.13
--.500
12.70
.563
14.30
E ± .031
(.79mm)
in
mm
.359
9.12
.359
9.12
.469
11.91
.484
12.29
--.500
12.70
.469
11.91
Polarizing
Pin
NO
NO
NO
14
14
14
17
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-46
Jones
Plugs/Sockets
Series 300
[.050” Multiple
(1.27mm)
Density
Density
Solder Solder
Cup/Wire
Eyelet
D-Microminiature]
180° Clamp w/Locks
300 Series Plug with Hood and Lock (CCT-L) and Socket with Hood and Keeper (CCT-K)
No. of
Contacts
2
3
4
6
8
10
12
15
18
21
24
27
30
33
Catalog No.
Catalog No.
Plug w/ Lock Socket w/ Keeper
P-302-CCT-L
S-302-CCT-K
P-303-CCT-L
S-303-CCT-K
P-304-CCT-L
S-304-CCT-K
P-306-CCT-L
S-306-CCT-K
N/A
N/A
P-310-CCT-L
N/A
P-312-CCT-L
N/A
P-315-CCT-L
S-315-CCT-K
P-318-CCT-L
S-318-CCT-K
P-321-CCT-L
S-321-CCT-K
P-324-CCT-L
S-324-CCT-K
P-327-CCT-L
S-327-CCT-K
P-330-CCT-L
S-330-CCT-K
P-333-CCT-L
S-333-CCT-K
Socket
2
Plug
Dimensions
No. of
Contacts
2
3
4
6
8
10
12
15
18
21
24
27
30
33
A ± .016
(.41mm)
in
mm
.691
17.5
1.034
26.26
.786
19.96
1.036
26.31
--1.592
40.44
1.286
32.66
1.795
45.59
2.107
53.52
2.420
61.47
2.732
69.39
3.045
77.34
3.357
85.27
3.670
93.22
B ± .016
(.41mm)
in
mm
.472
11.99
.724
18.39
.724
18.39
--.720
18.29
.974
24.74
1.100
27.94
1.100
27.94
1.100
27.94
1.100
27.94
1.100
27.94
1.100
27.94
1.100
27.94
C ± .031
(.79mm)
in
mm
.953
24.21
.953
24.21
.953
24.21
1.078
27.38
--1.203
30.56
1.203
30.56
1.850
46.99
1.850
46.99
1.850
46.99
1.850
46.99
1.850
46.99
1.850
46.99
1.850
46.99
F
in
.359
.359
.469
.484
-.500
.469
.712
.712
.712
.712
.712
.712
.712
mm
9.12
9.12
11.91
12.29
-12.70
11.91
18.08
18.08
18.08
18.08
18.08
18.08
18.08
“D” Cable
Opening Polarizing
in
mm
Pin
.375
9.53
-.313
7.94
-.375
9.53
-.438
11.13
----.500
12.70
-.563
14.30
-.563
14.30
NO
.563
14.30
NO
.625
15.88
NO
.625
15.88
14
.625
15.88
14
.750
19.05
14
.750
19.05
17
Marketed exclusively through distribution.
2-47
Call Toll Free: 1 (800) 323-9612
DURA-CON®
High Reliability
Miscellaneous
All-Plastic
[.050” (1.27mm) Density
Multiple Density
Solder Cup/Wire
Solder Eyelet
D-Microminiature]
JONES PLUGS AND SOCKETS 300 SERIES MATING CHART
PLUGS
MOUNTING
CONFIG.
2
AB
AB
DB
FP
RP
EB
SB
CCE
CCT
•*
•
•*
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•*
•*
•*
•*
•*
•*
•*
•*
•
•
•*
•*
•*
•
•
DB
FP
SOCKETS
RP
EB
SB
CCE
CCT
•
•
•
•
•
CCT-L
CCT-K
LAB
•
•
•
•
•
•
•
•
•
CCT-L
•
•
CCT-K
•
LAB
•
•
•
•
•
•
•
•
•
• These are recommended configurations.
•* These are possible configurations, but not normally recommended.
NOTE: Cinch layout S315-12 is available only in “AB” or “LAB”.
Replacement Drive Pins for Series 300 Plugs and Sockets with Cable Caps and Clamps
Dimensions
No. of
Contacts
2
3
4,6,8,10*
12
15-33*
Ordering Information
Dim. L
+.005 (.13mm)
in
mm
.687
17.45
.468
11.89
.718
18.24
.953
28.58
1.125
28.58
No. of
Contacts
2
3
4,6,8,10*
12
15-33*
Catalog No.
302R
303R
304R
312R
333R
*10 contact size and 15 through 33 contact sizes require two pins per unit; all other sizes require only one.
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-48
Jones
Plugs/Sockets
Series 2400
Multiple Density
Solder Eyelet
■ For use in cable-to-cable and cable-to-panel applications.
■ Designed for medium duty.
■ Plug prongs are .250" (6.35mm) wide and .055" (1.40mm) thick.
■ Socket contacts have solder eyelet contacts of .093" diameters.
■ Polarized to prevent wrong-way insertion.
FEATURES
■ Plugs have projecting flat blades, sockets have recessed twin bellows.
■ Cable clamps of zinc and clear irridite-plated steel are used for strain relief.
■ Bifurcated bellows socket contact provides four individual flexing surfaces for
maximum contact with the blade.
■ Plugs and sockets have recessed pockets with barriers around the contacts.
■ A shoulder extends around the face (mating) side of both plug and socket
presenting a finished appearance when mounted in bracket or cap.
■ Intermates with existing 400 Series Products on the market.
■ UL Recognized - file - E17021B (UL1977) E130965 (1863).
■ CSA - LR31996-2.
ELECTRICAL
MATERIALS
■ Panel cutout dimensions (See page 2-57).
Insulation Material: Molded monoblock, general purpose
phenolic, black
Contact Material: Plug: Brass
Socket: Phosphor bronze
Contact Plating: Cadmium
Operating Temperature: Up to +105°C
Hood Material: Formed metal with dielectric liner in hood to
prevent shorting
Operating Voltage:
Current Rating:
Current Resistance:
250 VAC RMS
15 Amps
1.0 Milliohms maximum
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-50
Jones
Plugs/Sockets
Series 2400
Multiple Density
Solder Eyelet
Less Angle Bracket
2400 Series Less Angle Bracket
No. of
Contacts
2
4
6
8
10
12
Catalog No.
Plug
N/A
P-2404-LAB
P-2406-LAB
P-2408-LAB
P-2410-LAB
P-2412-LAB
Catalog No.
Socket
S-2402-LAB
S-2404-LAB
S-2406-LAB
S-2408-LAB
S-2410-LAB
S-2412-LAB
Plug
Socket
Dimensions - Plug or Socket
No. of
Contacts
2
4
6
8
10
12
M
in
.563
1.000
1.438
1.875
2.313
2.750
L
mm
14.29
25.40
36.51
47.63
58.74
69.85
in
.656
1.094
1.531
1.969
2.406
1.844
mm
16.67
27.78
38.89
50.01
61.12
46.83
Marketed exclusively through distribution.
2-51
Call Toll Free: 1 (800) 323-9612
®
Jones
DURA-CON
High Reliability
Plugs/Sockets
All-Plastic
Series
2400
[.050”
Multiple
(1.27mm)
Density
Density
Solder
Solder
Cup/Wire
Eyelet
D-Microminiature]
With Angle Bracket
2400 Series with Angle Bracket
2
No. of
Contacts
2
4
6
8
10
12
Catalog No.
Plug
N/A
P-2404-AB
P-2406-AB
P-2408-AB
P-2410-AB
P-2412-AB
Catalog No.
Socket
S-2402-AB
S-2404-AB
S-2406-AB
S-2408-AB
S-2410-AB
S-2412-AB
Plug
Socket
Dimensions - Plug or Socket
No. of
Contacts
2
4
6
8
10
12
M
in
.563
1.000
1.438
1.875
2.313
2.750
L
mm
14.29
25.40
36.51
47.63
58.74
69.85
in
.656
1.094
1.531
1.969
2.406
2.844
mm
16.67
27.78
38.89
50.01
61.12
72.24
Panel Cutout dimensions are on page 2-61.
Call Toll Free: 1 (800) 323-9612
Marketed exclusively through distribution.
2-52
Jones
Plugs/Sockets
Series 2400
[.050”
Multiple
(1.27mm)
DensityDensity
Solder
Solder
Cup/Wire
Eyelet
D-Microminiature]
Shallow Bracket
2400 Series with Shallow Bracket
No. of
Contacts
2
4
6
8
10
12
Catalog No.
Plug
N/A
P-2404-SB
P-2406-SB
P-2408-SB
P-2410-SB
P-2412-SB
Catalog No.
Socket
S-2402-SB
S-2404-SB
S-2406-SB
S-2408-SB
S-2410-SB
S-2412-SB
2
Plug
Socket
Dimensions - Plug or Socket
No. of
Contacts
2
4
6
8
10
12
L
in
1.500
1.937
2.375
2.813
3.250
3.688
M
mm
38.10
49.21
60.33
71.45
82.55
93.68
in
1.062
1.500
1.938
2.375
2.813
3.250
mm
26.99
38.10
49.23
60.33
71.45
82.55
Panel Cutout dimensions are on page 2-61.
R. Max.
in
mm
1.766
19.45
1.234
31.34
1.672
42.47
2.109
53.57
2.547
64.69
2.984
75.80
Marketed exclusively through distribution.
2-53
Call Toll Free: 1 (800) 323-9612
Jones
DURA-CON®
Plugs/Sockets
High Reliability
Series
All-Plastic
2400
[.050”
Multiple
(1.27mm)
Density
Density
Solder
Solder
Cup/Wire
Eyelet
D-Microminiature]
Deep Bracket
2400 Series with Deep Bracket
2
No. of
Contacts
2
4
6
8
10
12
Catalog No.
Plug
N/A
P-2404-DB
P-2406-DB
P-2408-DB
P-2410-DB
P-2412-DB
Catalog No.
Socket
S-2402-DB
S-2404-DB
S-2406-DB
S-2408-DB
S-2410-DB
S-2412-DB
Plug
Socket
Plug or Socket
Dimensions - Plug or Socket
No. of
Contacts
2
4
6
8
10
12
B
in
.922
1.359
1.797
2.234
2.672
3.109
L
mm
23.42
34.53
45.64
56.74
67.87
78.97
in
1.750
2.188
2.625
3.063
3.500
3.938
M
mm
44.45
55.58
57.53
77.79
88.90
100.03
in
1.313
1.750
2.188
2.625
3.063
3.500
mm
33.35
44.45
55.58
66.68
77.80
88.90
Panel Cutout dimensions are on page 2-61.
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-54
Jones
Plugs/Sockets
Series 2400
[.050”
Multiple
(1.27mm)
Density
Density
Solder
Solder
Cup/Wire
Eyelet
D-Microminiature]
With Hood & 90° Clamp
2400 Series with Hood and 90° Clamp
No. of
Contacts
2
4
6
8
10
12
Catalog No.
Plug
N/A
P-2404-CCE
P-2406-CCE
P-2408-CCE
P-2410-CCE
P-2412-CCE
Catalog No.
Socket
S-2402-CCE
S-2404-CCE
S-2406-CCE
S-2408-CCE
S-2410-CCE
S-2412-CCE
2
Dimensions - Plug or Socket
No. of
Contacts
2
4
6
8
10
12
L
in
.625
1.062
1.500
1.937
2.375
2.813
C
mm
15.88
26.99
38.10
49.21
60.33
71.45
in
1.375
1.375
1.375
1.344
1.344
1.312
mm
34.93
34.93
34.93
34.13
34.13
33.34
Cable Opening
in
mm
.375
9.53
.438
11.11
.438
11.11
.563
14.29
.563
14.29
.625
15.88
Marketed exclusively through distribution.
2-55
Call Toll Free: 1 (800) 323-9612
Jones
DURA-CON®
Plugs/Sockets
High Reliability
Series
All-Plastic
2400
Multiple Density
Solder Eyelet
With Hood & 180° Clamp
2400 Series with Hood and 180° Clamp
2
No. of
Contacts
2
4
6
8
10
12
Catalog No.
Plug
N/A
P-2404-CCT
P-2406-CCT
P-2408-CCT
P-2410-CCT
P-2412-CCT
Catalog No.
Socket
S-2402-CCT
S-2404-CCT
S-2406-CCT
S-2408-CCT
S-2410-CCT
S-2412-CCT
Plug
Socket
Dimensions - Plug or Socket
No. of
Contacts
2
4
6
8
10
12
L
in
.625
1.062
1.500
1.937
2.375
2.813
Cable Opening
in
mm
.313
7.94
.438
11.11
.438
11.11
.563
14.29
.563
14.29
.625
15.88
mm
15.88
26.99
38.10
49.21
60.33
71.45
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-56
Jones
Plugs/Sockets
Series 2400
Panel Cutout Dimensions
Angle Bracket
A
Reference
in
mm
P-2402-AB
--S-2402-AB
1.188
30.16
P-2404-AB
S-2404-AB
1.625
41.28
P-2406-AB
S-2406-AB
2.063
52.40
P-2408-AB
S-2408-AB
2.500
63.50
P-2410-AB
S-2410-AB
2.938
74.63
P-2412-AB
S-2412-AB
3.375
85.73
Panel Cutout Dimensions
Shallow Bracket
A
Reference
in
mm
P-2402-SB
S-2402-SB
1.062
27.00
P-2404-SB
S-2404-SB
1.500
38.10
P-2406-SB
S-2406-SB
1.938
49.22
P-2408-SB
S-2408-SB
2.376
60.34
P-2410-SB
S-2410-SB
2.812
71.44
P-2412-SB
S-2412-SB
3.250
82.56
Panel Cutout Dimensions
Deep Bracket
A
Reference
in
mm
P-2402-DB
S-2402-DB
1.312
33.34
P-2404-DB
S-2404-DB
1.750
44.46
P-2406-DB
S-2406-DB
2.188
55.56
P-2408-DB
S-2408-DB
2.624
66.68
P-2410-DB
P-2410-DB
3.062
77.80
P-2412-DB
S-2412-DB
3.500
88.90
[.050” (1.27mm) Density
Solder
Panel
Cup/Wire
Cutout Dimensions
D-Microminiature]
B
C
in
-1.008
mm
-25.60
in
-1.015
mm
-25.78
1.445
36.70
1.015
25.78
1.886
47.83
1.015
25.78
2.320
58.93
1.015
25.78
2.758
70.05
1.015
25.78
3.195
81.15
1.015
25.78
in
mm
in
mm
.813
20.64
1.156
29.37
1.250
31.75
1.156
29.37
1.688
42.86
1.156
29.37
2.125
53.98
1.156
29.37
2.563
65.10
1.156
29.37
3.000
76.20
1.156
29.37
in
mm
in
mm
.938
23.81
1.438
36.51
1.375
34.93
1.438
36.51
1.813
46.04
1.438
36.51
2.250
57.15
1.438
36.51
2.688
68.28
1.438
36.51
3.125
79.38
1.438
36.51
B
2
C
B
C
Marketed exclusively through distribution.
2-57
Call Toll Free: 1 (800) 323-9612
Contact positions 3, 4, 5, 6, 7, and 8.
Pre-assembled with standard shielded cable lengths; consult factory for other lengths.
Molded-in strain relief.
Cable and overmold available in standard colors: black or beige.
Contacts available with gold over nickel.
Shielding system designed to meet FCC requirements for EMI/RFI suppression.
UL Recognized - file E170218 (UL1977).
CSA Certified - file LR31996-6.
Insulation Material: Plug Insulator: UL 94V-0 rated nylon
Plug Overmold: PVC (black or beige)
Cable Jacket: PVC (black or beige)
Contact Material: Plug: Phosphor bronze
Contact Plating:
Option 1: Gold Flash over nickel underplate overall
Option 2: Option 1 plus additional gold in mating area for total
thickness of 30µin.
Shield Material: Steel
Shield Plating: Nickel
Standard Cable Shielded cable with 0.197 inch OD
Composition:
jacket over 28 AWG stranded wire
conductors. Contact factory for custom
cable requirements.
Shock: MIL-STD-202, Method 213, Condition C
Operating Temperature: -40°C to +70°C
Heat Resistance: 196 hrs. at 100°C
Salt Spray: MIL-STD-202, Method 101D, Condition D
Vibration: MIL-STD-202, Method 204, Condition B
Humidity: MIL-STD-202, Method 103, 48 hrs. at 90-95% RH at 40°C
MECHANICAL
ELECTRICAL
MATERIALS
■
■
■
■
■
■
■
■
Single-Ended
Cable Assembly
ENVIRONMENTAL
FEATURES
Circular Mini DIN Plugs
Voltage Rating:
Current Rating:
Contact Resistance:
Insulation Resistance:
500 VAC RMS, 707 VDC
1 Amp at 100 VAC
2 Amps at 12 VDC
Contact to contact: 30 milliohms maximum
Shield to shield: 50 milliohms maximum
500 megohms minimum at 500 VDC
100 megohms minimum after humidity
Durability: Withstands 500 mating/unmating cycles
Mating Force: 10 lb. (4.5 kg) maximum
Unmating Force: 1 lb. (0.9 kg) minimum
Contact Retention: 3 lb. minimum
Call Toll Free: 1 (800) 323-9612
PIN NO
1
2
3
4
5
6
7
8
COLOR
BLACK
GREEN
RED
BROWN
BLUE
WHITE
YELLOW
GRAY
Marketed exclusively through distribution.
2-58
Circular Mini DIN Plugs
Single-Ended
Cable Assembly
Dimensions
3-Contact
4-Contact
5-Contact
7-Contact
6-Contact
8-Contact
Ordering Information: (NOTE: One meter = 39.62 inches.)
For cable assemblies with plug on one end. Plug features contacts with Option 1 plating
(gold flash over nickel).
No. of
Contacts
3
4
4
4
5
6
6
6
7
7
7
8
8
8
Cable
Length
Meter
Black Color
Cable &
Overmold
Catalog No.
Beige Color
Cable &
Overmold
Catalog No.
1
1
2
3
1
1
2
3
1
2
3
1
2
3
MDC-3P05
MDC-4P05
MDC-4P13
MDC-4P15
MDC-5P05
MDC-6P05
MDC-6P13
MDC-6P15
MDC-7P05
MDC-7P13
MDC-7P15
MDC-8P05
MDC-8P13
MDC-8P15
MDC-3P08
MDC-4P08
MDC-4P53
MDC-4P55
MDC-5P08
MDC-6P08
MDC-6P53
MDC-6P55
MDC-7P08
MDC-7P53
MDC-7P55
MDC-8P08
MDC-8P53
MDC-8P55
The above cable assemblies are highly recommended for general commercial
applications. Contact factory for other lengths or colors.
For cable assemblies with plug on one end. Plug features contacts with Option 2 plating (Option 1 with additional
gold in mating area). NOTE: Total gold thickness in mating area is 30 microinches.
No. of
Contacts
3
4
5
6
7
8
Cable
Length
Meter
Black Color
Cable &
Overmold
Catalog No.
Beige Color
Cable &
Overmold
Catalog No.
1
1
1
1
1
1
MDC-3P06
MDC-4P06
MDC-5P06
MDC-6P06
MDC-7P06
MDC-8P06
MDC-3P09
MDC-4P09
MDC-5P09
MDC-6P09
MDC-7P09
MDC-8P09
The above cable assemblies are recommended where greater
contact durability is required.
Additional Capabilities
• Additional lengths or colors of the above cable assemblies can be produced. Consult factory for custom orders.
• Custom-plated contacts can be provided. Consult factory for information.
Marketed exclusively through distribution.
2-59
Call Toll Free: 1 (800) 323-9612
FEATURES
Circular Mini DIN Plugs
Plug Components for
Cable Termination
■ Individual components available for cable assembly with overmolding.
■ Plug insulator available with contact positions 3, 4, 5, 6, 7, and 8.
■ Seamless shield case is crimped to cable shield; designed to meet
FCC requirements for EMI/RFI suppression.
■ One-piece shield case - no extra ferrules or shields required with
Cinch Shield Crimp Tools.
■ Contacts are crimp style and supplied on reels.
■ Contacts available with gold over nickel in several options.
■ Tools available to facilitate reliable, efficient termination.
■ Terminates 24 to 30 AWG wire.
■ UL Recognized - file E170218 (UL1977).
Insulation Material: Plug Insulator: 94 V-0 rated nylon
Contact Material: Plug: Phosphor bronze
MATERIALS
Contact Plating:
Option 1: Gold flash over nickel underplate overall
Option 2: Option 1 plus additional gold in mating area for
total thickness of 30µin.
Option 3: Option 1 plus additional gold in mating area for
total thickness of 50µin.
Shield Case Material: Steel
Shield Case Plating: Nickel
Dimensions
3-Contact
6-Contact
4-Contact
5-Contact
7-Contact
8-Contact
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-60
Circular Mini DIN Plugs
Plug Components for
Cable Termination
Ordering Information
For each Plug Assembly, the following components are needed: one plug insulator, one shield,
and adequate contacts.
Component
Type
Insulator
Shield Case
Contact
Description
3 Position Insulator
4 Position Insulator
5 Position Insulator
6 Position Insulator
7 Position Insulator
8 Position Insulator
Metal Shield Case
Option 1 Plating
Option 1 Plating
Option 2 Plating
Option 2 Plating
Option 3 Plating
Quantity
1
1
1
1
1
1
1
300 on Reel
15,000 on Reel
300 on Reel
15,000 on Reel
15,000 on Reel
Catalog No.
MDX-3PI
MDX-4PI
MDX-5PI
MDX-6PI
MDX-7PI
MDX-8PI
MDX-PZ
MDX-P-3A
MDX-P-15A
MDX-P-3B
MDX-P-15B
MDX-P-15D
Tool Ordering Information
The following tools are recommended for Mini Din Cable Plug Assembly.
One tool of each type is required.
Tool Type
Contact Crimp
Contact Insertion
Insulator Insertion
Shield Crimp
Description
Stripper-Crimper Machine
Complete, Includes Dies
Contact Crimp Hand Tool
Crimps using 300 Contact Reels
Combination Contact Insertion
and Insulator Insertion Tool
Contact Insertion Hand Tool
Fixture used with MDT-P28
Insulator Insertion Bench Mounted Tool
Insulator Insertion Hand Tool
Pneumatic Crimp Tool
Catalog No.
MDT-P25
MDT-P35
MDT-P41
MDT-P28
MDT-P29
MDT-P34
MDT-P30
MDT-P81
Overview of Assembly Steps
• Prepare multi-conductor cable.
• Crimp contacts onto individual conductors using tool MDT-P25 or tool MDT-P35.
• Insert contact with conductor into insulator using tool MDT-P41 or have insertion tool MDT-P28 with insulator locating
vice MDT-P29.
• Insert insulator into the shield case using tool MDT-P34 or MDT-P30.
• Crimp the shield case onto the cable shield using tool MDT-P81.
• Overmold plastic to complete the assembly.
Marketed exclusively through distribution.
2-61
Call Toll Free: 1 (800) 323-9612
FEATURES
CARDCON ™
Edge Connector
Commercial
■
■
■
■
■
■
■
■
■
■
.100" (2.54mm) Density
Dip Solder
AT and XT versions available.
Dip solder tails on .200" (5.08mm) row centers double readout.
Bifurcated semi-bellows contacts for added contact reliability.
Ideal for applications involving vibration or board irregularities.
Contact positions: 12, 15, 18, 20, 22, 25, 28, 30, 31, 36, 37, 40, 43, 44, 49,
50, 52, 60, 70, AT, and XT.
Accepts .062" (1.59mm) thick PC boards.
Available less mounting ears, or with .128" (3.25mm) mounting holes or
4-40 threaded holes.
Meets applicable performance criteria of MIL-C-21097.
Tube packaging available.
UL Recognized - file E170218 (UL1977) E130965 (UL1863).
MECHANICAL
ELECTRICAL
ENVIRONMENTAL
MATERIALS
Insulation Material: UL 94V-0 rated glass-filled polyester, black
Contact Material: Spring brass
Standard Contact Plating: 10µin. selective gold over nickel, 50µin.
nickel in contact area, tin on tails
XT, AT Plating: 30µin. selective gold over 50µin. nickel in contact
area, tin on tails
Shock: Per MIL-STD-202E, Method 213, Condition C
Operating Temperature: -65°C to +105°C
Vibration: Per MIL-STD-202E, Method 204, Condition B
Humidity: Per MIL-STD-202, Method 103, Condition B
Accessories:
Polarizing Key: Two types (order separately):
a) for between-contact polarization and
b) for in-contact polarization.
See page 2-74 for more information.
Card Guide Posts: (order separately)
Attach to mounting ears and guide PC board into
connector. See page 2-74 for more information.
Withstanding Voltage:
Current Rating:
Contact Resistance:
Insulation Resistance:
650 VAC RMS (@ sea level)
3 Amps
10 Milliohms maximum
5000 Megohms minimum
Individual Contact Insertion and Separation Force:
12oz. maximum with .070" (1.78mm) blade;
1 oz. minimum with .054" (1.37mm) blade
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-62
CARDCON ™
Edge Connector
Commercial
.100" (2.54mm) Density
Dip Solder
Dimensions
No. of
Pos./Cont.
12/24
15/30
18/36
18/36+
31/62IBM
20/40
22/24
25/50
28/56
30/60
31/62
31/62IBM
36/72
37/74
40/80
43/86
44/88
49/98
50/100
52/104
60/120
70/140
A
B
C
D
E
F
in
1.000
1.300
1.600
mm
25.40
33.02
40.64
in
1.100
1.400
1.700
mm
27.94
35.56
43.18
in
1.300
1.600
1.900
mm
33.02
40.64
48.26
in
1.460
1.760
2.060
mm
37.08
44.70
52.32
in
1.775
2.075
2.375
mm
45.09
52.71
60.33
in
2.035
2.335
2.635
mm
51.69
59.31
66.93
5.000
1.800
2.000
2.300
2.600
2.800
2.900
2.900
3.400
3.500
3.800
4.100
4.200
4.700
4.800
5.000
5.800
6.800
127.00
45.72
50.80
58.42
66.04
71.12
73.66
73.66
86.36
88.90
96.52
104.14
106.68
119.38
121.92
127.00
147.32
172.72
5.100
1.900
2.100
2.400
2.700
2.900
3.000
3.000
3.500
3.600
3.900
4.200
4.300
4.800
4.900
5.100
5.900
6.900
129.54
48.26
53.34
60.96
68.58
73.66
76.20
76.20
88.90
91.44
99.06
106.68
109.22
121.92
124.46
129.54
149.86
175.26
5.300
2.100
2.300
2.600
2.900
3.100
3.200
3.200
3.700
3.800
4.100
4.400
4.500
5.000
5.100
5.300
6.100
7.100
134.62
53.34
58.42
66.04
73.66
78.74
81.28
81.28
93.98
96.52
104.14
111.76
114.30
127.00
129.54
134.62
154.94
180.34
5.460
2.260
2.460
2.760
3.060
3.260
3.360
3.360
3.860
3.960
4.260
4.560
4.660
5.160
5.260
5.460
6.260
7.260
138.68
57.40
62.48
70.10
77.72
82.80
85.34
85.34
98.04
100.58
108.20
115.82
118.36
131.06
133.60
138.68
159.00
184.40
5.775
2.575
2.775
3.075
3.375
3.575
3.675
3.675
4.175
4.275
4.575
4.875
4.975
5.475
5.575
5.775
6.575
7.575
146.69
65.41
70.49
78.11
85.73
90.81
93.35
93.35
106.05
108.59
116.21
123.83
126.37
139.07
141.61
146.69
167.01
192.41
6.035
2.835
3.035
3.335
3.635
3.835
3.935
3.935
4.435
4.535
4.835
5.135
5.235
5.735
5.835
6.035
6.835
7.835
153.29
72.01
77.09
84.71
92.33
97.41
99.95
99.95
112.63
115.19
122.81
130.43
132.97
145.67
148.21
153.29
173.61
199.01
Ordering Information
No. of
Pos./Cont.
12/24
15/30
18/36
18/36+
31/62 IBM
20/40
22/44
25/50
28/56
30/60
31/62
31/62 IBM
36/72
37/74
40/80
43/86
44/88
49/98
50/100
52/104
60/120
70/140
Less Mounting Ears
Catalog No.
50-12SN-12
50-15SN-12
50-18SN-12
.128" (3.25mm)
Mounting Holes
Catalog No.
50-12SN-11
50-15SN-11
50-18SN-11
4-40
Threaded Holes
Catalog No.
50-12SN-13
50-15SN-13
50-18SN-13
50-52SN-AT
50-20SN-12
50-22SN-12
50-25SN-12
50-28SN-12
50-30SN-12
50-31SN-12
50-31SN-XT
50-36SN-12
50-37SN-12
50-40SN-12
50-43SN-12
50-44SN-12
50-49SN-12
50-50SN-12
50-52SN-12
50-60SN-12
50-70SN-12
50-20SN-11
50-22SN-11
50-25SN-11
50-28SN-11
50-30SN-11
50-31SN-11
50-36SN-11
50-37SN-11
50-40SN-11
50-43SN-11
50-44SN-11
50-49SN-11
50-50SN-11
50-52SN-11
50-60SN-11
50-70SN-11
50-20SN-13
50-22SN-13
50-25SN-13
50-28SN-13
50-30SN-13
50-31SN-13
50-36SN-13
50-37SN-13
50-40SN-13
50-43SN-13
50-44SN-13
50-49SN-13
50-50SN-13
50-52SN-13
50-60SN-13
50-70SN-13
Marketed exclusively through distribution.
2-63
Call Toll Free: 1 (800) 323-9612
MATERIALS
FEATURES
CARDCON ™
Edge Connector
Commercial
.156" (3.96mm) Density
Dip Solder/Solder Eyelet
■ Dip solder tails single readout and double readout on .140" (3.56mm) row
centers or .200" (5.08mm) row centers.
■ Solder eyelet, single readout and double readout on .200" (5.08mm)
row centers.
■ Available with unique tails for PC board retention; holds the connector
firmly on the board during wave soldering operations.
■ Bifurcated semi-bellows contacts for added contact reliability.
■ Ideal for applications involving vibration or board irregularities.
■ Contact positions: 6, 10, 12, 15, 18, 22, 24, and 25.
■ Accepts single- or double-sided .062" (1.59mm) thick PC boards.
■ Available less mounting ears or with .128" (3.25mm) mounting hole.
■ Meets applicable performance criteria of MIL-C-21097.
■ UL Recognized - file E170218 (UL1977) E130965 (UL1863).
Insulation Material: UL 94V-0 rated glass-filled polyester, black
Contact Material: Spring brass
Contact Plating: 10µ" selective gold over 30µ" nickel in contact
area, tin on tails
Shock: Per MIL-STD-202E, Method 213, Condition C
ENVIRONMENTAL
Operating Temperature: -65°C to +105°C
Vibration: Per MIL-STD-202E, Method 204, Condition B
Humidity: Per MIL-STD-202, Method 103, Condition B
Accessories:
Polarizing Key: Two types (order separately):
a) for between-contact polarization and
b) for in-contact polarization
See page 2-72 for more information.
MECHANICAL
ELECTRICAL
Card Guide Posts: (order separately):
Attach to mounting ears and guide PC board into connector
See page 2-72 for more information.
Withstanding Voltage:
Current Rating:
Contact Resistance:
Insulation Resistance:
1800 VAC RMS (@ sea level)
5 Amps
6 Milliohms maximum
5000 Megohms minimum
Individual Contact Insertion and Separation Force:
16 oz. maximum with .070" (1.78mm) blade;
1 oz. minimum with .054" (1.37mm) blade
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-64
CARDCON ™
Edge Connector
Commercial
[.050” (1.27mm) Density
.156" (3.96mm) Density
Solder Cup/Wire
Dip Solder/Solder Eyelet
D-Microminiature]
2
Dimensions
No. of
Pos./Cont.
6/12
10/20
12/24
15/30
18/36
22/44
24/48
25/50
A
In
1.785
2.410
2.723
3.191
3.660
4.285
4.598
4.754
mm
45.34
61.21
69.16
81.05
92.96
108.84
116.79
120.75
B
in
mm
1.531
38.89
2.156
54.76
2.469
62.71
2.937
74.60
3.406
86.51
4.031 102.39
4.344 110.34
4.500 114.30
C
in
1.239
1.874
2.177
2.645
3.114
3.739
4.052
4.208
mm
31.47
47.34
55.30
67.18
79.10
94.94
102.92
106.88
D
in
1.100
1.724
2.036
2.504
2.972
3.596
3.911
4.067
mm
27.94
43.79
51.71
63.60
75.49
91.34
99.34
103.30
Ordering Information
No. of
Less Mounting Ears .128 Mounting Hole
Pos./Cont. Catalog No.
Catalog No.
Solder eyelet, single readout
6/6
10/10
12/12
15/15
18/18
22/22
24/24
25/25
50-6SN-8
50-10SN-8
50-12SN-8
50-15SN-8
50-18SN-8
50-22SN-8
50-24SN-8
50-25SN-8
50-6SN-7
50-10SN-7
50-12SN-7
50-15SN-7
50-18SN-7
50-22SN-7
50-24SN-7
50-25SN-7
No. of
Less Mounting Ears .128 Mounting Hole
Pos./Cont. Catalog No.
Catalog No.
Dip solder tails, single readout, .156" (3.96mm)
long
No. of
Less Mounting Ears .128 Mounting Hole
Pos./Cont. Catalog No.
Catalog No.
Dip solder tails, double readout, .140" (3.55mm) row
spacing, .125" (3.18mm) long
6/6
10/10
12/12
15/15
18/18
22/22
24/24
25/25
6/12
10/20
12/24
15/30
18/36
22/24
24/48
25/50
50-6SN-6
50-10SN-6
50-12SN-6
50-15SN-6
50-18SN-6
50-22SN-6
50-24SN-6
50-25SN-6
50-6SN-5
50-10SN-5
50-12SN-5
50-15SN-5
50-18SN-5
50-22SN-5
20-24SN-5
50-25SN-5
50-12SN-4
50-20SN-4
50-24SN-4
50-30SN-4
50-36SN-4
50-44SN-4
50-48SN-4
50-50SN-4
50-12SN-2
50-20SN-2
50-24SN-2
50-30SN-2
50-36SN-2
50-44SN-2
50-48SN-2
50-50SN-2
Solder eyelet, double readout, .200" (5.08mm)
row spacing
Dip solder tails, double readout, .200" (5.08mm)
row spacing, .156" (3.96mm) long
Dip solder tails with unique board retention feature
.200" (5.08mm) row spacing, .156" (3.96mm) long
6/12
10/20
12/24
15/30
18/36
22/24
24/28
25/50
6/12
10/20
12/24
15/30
18/36
22/44
24/48
25/50
6/12
10/20
12/24
15/30
18/36
22/44
24/48
25/50
50-12SN-10
50-20SN-10
50-24SN-10
50-30SN-10
50-36SN-10
50-44SN-10
50-48SN-10
50-50SN-10
50-12SN-9
50-20SN-9
50-24SN-9
50-30SN-9
50-36SN-9
50-44SN-9
50-48SN-9
50-50SN-9
50-12SN-3
50-20SN-3
50-24SN-3
50-30SN-3
50-36SN-3
50-44SN-3
50-48SN-3
50-50SN-3
50-12SN-1
50-20SN-1
50-24SN-1
50-30SN-1
50-36SN-1
50-44SN-1
50-48SN-1
50-50SN-1
50-12SN-3R
50-20SN-3R
50-24SN-3R
50-30SN-3R
50-36SN-3R
50-44SN-3R
50-48SN-3R
50-50SN-3R
50-12SN-1R
50-20SN-1R
50-24SN-1R
50-30SN-1R
50-36SN-1R
50-44SN-1R
50-48SN-1R
50-50SN-1R
Marketed exclusively through distribution.
2-65
Call Toll Free: 1 (800) 323-9612
Edge Connector
High Reliability
.156" (3.96mm) Density Dip
Solder/Solder Eyelet
■ Dip solder tails, single readout, .156" (3.96mm) long or .234" (5.94mm) long.
FEATURES
■ Dip solder tails, double readout, .156" (3.96mm) or .234" (5.94mm) long on
.200" (5.08mm) row spacing, or .125" (3.18mm) long on .140" (3.56mm) row spacing.
■ Solder eyelet, single readout and double readout on .200" (5.08mm) row spacing.
■ Patented bifurcated bellows contacts for added contact reliability.
■ Ideal for applications involving vibration or board irregularities.
■ Contact positions: 6, 10, 12, 15, 18, 22, and 25.
■ Available with or without mounting ears.
■ Accepts single- or double-sided .062" (1.59mm) thick PC boards.
MATERIALS
Shock: Per MIL-STD-202E, Method 202
Operating Temperature: Dip solder: -65°C to +105°C
Solder eyelet: -65°C to +125°C
Vibration: Per MIL-STD-202E, Method 204, Condition B
Humidity: Per MIL-STD-202E, Method 103, Condition B
Accessories:
Polarizing Key: Two types (order separately):
a) for between-contact polarization and
b) for in-contact polarization
See page 2-74 for more information.
Card Guide Posts: (order separately):
Attach to mounting ears and guide PC board into connector
See page 2-74 for more information.
MECHANICAL
ELECTRICAL
Insulation Material: Diallyl phthalate, green
Contact Material: Phosphor bronze
Contact Plating: 30µ" selective gold over 50µ" copper in the
contact areas, 5µ" gold on tails
ENVIRONMENTAL
■ UL Recognized - file E170218 (UL1977) E130965 (UL1863).
Withstanding Voltage:
Current Rating:
Contact Resistance:
Insulation Resistance:
1800 VAC RMS (@ sea level)
5 Amps
Dip solder: 6 Milliohms
Solder eyelet: 10 Milliohms
5000 Megohms minimum
Individual Contact Insertion and Separation Force:
16 oz. maximum with .070" (1.78mm) blade;
1 oz. minimum with .054" (1.37mm) blade
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-66
Edge Connector
High Reliability
.156" (3.96mm) Density Dip
Solder/Solder Eyelet
Single Readout
Double Readout
With Plain Mounting Holes
Dimensions
No. of
Pos./Cont.
6
10
12
15
18
20
22
25
A
in
1.100
1.724
2.036
2.504
2.972
3.286
3.596
4.067
mm
27.94
43.79
51.71
63.60
75.49
83.46
91.34
103.30
B
in
1.239
1.864
2.177
2.645
3.114
3.427
3.739
4.208
C
mm
31.47
47.35
55.30
67.18
79.10
87.05
94.97
106.88
in
1.531
2.156
2.469
2.937
3.406
3.719
4.031
4.500
mm
38.80
54.76
62.71
74.60
86.51
94.46
102.39
114.30
D
in
1.785
2.410
2.723
3.191
3.660
3.973
4.285
4.754
mm
45.34
61.21
69.16
81.05
92.96
100.91
108.84
120.75
Marketed exclusively through distribution.
2-67
Call Toll Free: 1 (800) 323-9612
DURA-CON®
Edge Connector
High Reliability
High Reliability
All-Plastic
[.050” (1.27mm) Density
.156" (3.96mm) Density Dip
Solder Cup/Wire
Solder/Solder Eyelet
D-Microminiature]
Ordering Information
Single Readout
No. of
Pos./Cont.
2
6/6
10/10
12/12
15/15
18/18
20/20
22/22
25/25
.128" (3.25mm) Mounting Hole
Dip Solder Tails
Dip Solder Tails
.156" (3.96mm) Long
.234" (5.94mm) Long
Catalog No.
Catalog No.
50-6H-10
50-6S-10
50-10H-10
50-10S-10
50-12R-10
50-12S-10
50-15H-10
50-15S-10
50-18H-10
50-18S-10
50-20C-10
50-20S-10
50-22H-10
50-22S-10
50-25H-10
50-25S-10
Solder
Eyelet
Catalog No.
50-6H-20
50-10H-20
50-12H-20
50-15H-20
50-18H-20
50-20A-20
50-22H-20
50-25H-20
Double Readout
.128" (3.25mm)
Mounting Hole
Less Mounting Ears
Solder Eyelet
Dip Solder Tails
Dip Solder Tails
Dip Solder Tails
Dip Solder Tails
No. of
.234" (5.94mm) Long
.156" (3.96mm) Long
.125" (3.18mm) Long
.125" (3.18mm) Long
Pos./Cont.
.200" (5.08mm) Between .200" (5.08mm) Between .140" (3.56mm) Between .140" (3.56mm) Between
Row Spacing
Row Spacing
Row Spacing
Row Spacing
Catalog No.
Catalog No.
Catalog No.
Catalog No.
Catalog No.
6/12
50-12H-30
50-12S-20
50-12H-10
50-12H-30-2
50-12H-30-1
10/20
50-20H-30
50-20S-20
50-20H-10
50-20H-30-2
50-20H-30-1
12/24
50-24H-30
50-24S-20
50-24H-10
50-24H-30-2
50-24H-30-1
15/30
50-30H-30
50-30S-20
50-30H-10
50-30H-30-2
50-30H-30-1
18/36
50-36H-30
50-36S-20
50-36H-10
50-36H-30-2
50-36H-30-1
20/40
50-40A-30
50-40S-20
50-40B-10
22/44
50-44H-30
50-44S-20
50-44H-10
50-44H-30-2
50-44H-30-1
25/50
50-50H-30
50-50S-20
50-50H-10
50-50H-30-2
50-50H-30-1
Call Toll Free: 1 (800) 323-9612
2-68
Edge Connector
High Reliability
.156" (3.96mm) Density
Card Extender
FEATURES
■ Solder terminations, double readout.
■ Bifurcated bellows type contacts.
■ Contact positions: 6, 10, 12, 15, 18, 22, and 25.
MECHANICAL
ELECTRICAL
ENVIRONMENTAL
MATERIALS
■ Accepts .062" (1.59mm) thick double-sided PC boards.
Insulation Material: Diallyl phthalate, green
Contact Material: Beryllium copper
Contact Plating: 30µin. select gold over 50µin. nickel in the contact
areas, 10µin. gold tails
Shock: Per MIL-STD-202E, Method 213, Condition C
Operating Temperature: -65°C to +125°C
Vibration: Per MIL-STD-202E, Method 204, Condition B
Humidity: Per MIL-STD-202E, Method 103, Condition B
Withstanding Voltage:
Current Rating:
Contact Resistance:
Insulation Resistance:
830 VAC RMS (@ sea level)
5 Amps
5 Milliohms maximum
5000 Megohms minimum
Individual Contact Insertion and Separation Force:
16 oz. maximum with .070" (1.78mm) blade;
1 oz. minimum with .054" (1.37mm) blade
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-70
Edge Connector
High Reliability
.156" (3.96mm) Density
Card Extender
Dimensions
Dimensions
No. of
Pos./Cont.
6/12
10/20
12/24
15/30
18/36
22/44
25/50
A
in
1.100
1.724
2.036
2.504
2.972
3.596
4.067
B
mm
27.94
43.79
51.71
63.60
75.48
91.33
103.30
in
1.239
1.864
2.177
2.645
3.114
3.739
4.208
C
mm
31.47
47.34
55.29
67.18
79.09
94.97
106.88
in
1.531
2.156
2.469
2.937
3.406
4.031
4.500
mm
38.88
54.76
62.71
74.59
86.51
102.38
114.30
D
in
1.785
2.410
2.723
3.191
3.660
4.285
4.754
mm
45.33
61.21
69.16
81.05
92.96
108.83
120.75
Ordering Information
No. of
Pos./Cont.
6/12
10/20
12/24
15/30
18/36
22/44
25/50
Catalog No.
50-12S-30
50-20S-30
50-24S-30
50-30S-30
50-36S-30
50-44S-30
50-50S-30
Marketed exclusively through distribution.
2-71
Call Toll Free: 1 (800) 323-9612
Edge Connector
Accessories
Card Guides
Polarizing Keys
Card Guides
Card guide for .100" (2.54mm) and .156" (3.96mm) density edge connectors. Accepts .062" (1.59mm) thick PC boards.
Card guides attach to mounting ears and guide printed circuit board into connector. Order separately.
Material: Polypropylene
Part No. 50-GP-1 (Green)
Part No. 50-GP-1B (Black)
Polarizing Keys
Style A
Description
Between-contact
In-contact type
Between-contact
Between-contact
Between-contact
In-contact type
Style B
type
type
type
type
Connector Family
.156"
.156"
.156"
.156"
.100"
.156"
Style C
Material
Cellulose acetate
Thermoset plastic
Glass epoxy
Glass epoxy
Glass-filled nylon
Thermoplastic
Style D
Style
B
B
A
D
C
B
Catalog No.
50-PK
50-PK1
50-PK2
50-PK2M
50-PK3
50-PK4
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-72
Socket
Commercial
Miscellaneous
Plug Buttons
Plug Buttons
Dimensions
Nickel-plated steel. Spring tension prongs.
41V provides ventilation wherever required.
For Hole
Diameter
in
mm
.250
6.35
.375
9.53
.500
12.70
.625
15.88
.750
19.05
.875
22.23
1.000
25.40
1.250
31.75
1.000
25.40
Call Toll Free: 1 (800) 323-9612
2-74
Cup
Diameter
in
mm
.406
10.32
.500
12.70
.656
16.67
.797
20.24
.938
23.81
1.062
26.99
1.156
29.37
1.438
36.51
1.156
29.37
Catalog No.
41A
41B
41C
41D
41E
41F
41G
41H
41V
Press-Fit BNC Coaxial Connector Board Mount
Receptacle for 75 Ω Applications
FEATURES
■ Solderless, Press-Fit Installation.
■ Strong, One-Piece Cast Body.
■ Standard BNC Interface.
Ω Impedance.
■ 75Ω
MATERIALS
■ Meets Lucent Technologies (AT&T) Requirements.
Body: One-piece diecast zinc per QQ-Z-363
Plating: Nickel, 150µin. min. per QQ-N-290 over copper, 200µin.
min. per MIL-C-14550
Center Contact: Beryllium copper
Plating: Gold, 30µin. minimum over nickel, 50µin. minimum
Insulator: Teflon TFE per ASTM D1710
Compliant version,
Pt. No. 299 99 00 134
is also available.
For more information please
contact us at 1-800-323-9612
Unique patented press-fit connector design
allows for multiple insertions into a backplane
without loss of mechanical retention or electrical
ELECTRICAL
Impedance:
Frequency Range:
RF Leakage:
Insertion Loss:
VSWR:
performance.
75Ω
0 to 4 GHz
The design requirements for nominal PC board
> -55 dB
mounting holes and thickness are as follows:
.2dB maximum @ 2 GHz
Insertion Forces:
1.024
Working Voltage:
< 500 VAC RMS @ sea level
Insulation Resistance:
> 5000 MOhms @ 500 VDC
.093 Board Thickness: 200 lb. max.
.250 Board Thickness: 500 lb. max.
MECHANICAL
Withdraw Forces:
Connector Insertion Force: <500 lb.*
Connector Removal Force: >100 lb.*
Center Contact Insertion Force: < 2.0 lb.*
Center Contact Removal Force: > 2.0 oz.*
*Requirements are for two connector insertions into the same PC board
mounting holes. PC board thickness can range from .093" to .300" thick.
PC board hole requirements are as follows:
Ground Legs: .059" Nom.
Center Contact: .040" Nom.
Call Toll Free: 1 (800) 323-9612
2-76
.093 Board Thickness: 100 lb. max.
.250 Board Thickness: 200 lb. max.
The Cinch Press-Fit BNC surpasses these
requirements with a unique, non-symmetrical
ground leg design. This design allows the
connector to be inserted, removed, rotated 180o,
and reinserted into the same location on the
board without loss of mechanical or electrical
performance.
Press-Fit BNC Coaxial Connector Board Mount
Receptacle for 75 Ω Applications
Production Insertion Tool Design
Press-Fit BNC Connector Dimensions
Ordering Information
Catalog Number:
Standard Package:
BNC-1-PF
Anti-Static Tube, 48 Connectors Per Tube
2-77
Call Toll Free: 1 (800) 323-9612