050-207 - Glenair

050-207
Data Sheet
4 Channel SMPTE
Copper to Fiber Media Converter
28VDC
REV
2
BF14U2-7515
DESCRIPTION
Preliminary
DATE
8/21/2014
APPROVED
MF
THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO
BE DISCLOSED, REPRODUCED IN WHOLE OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED
FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN PERMISSION FROM GLENAIR, INC. THE INFORMATION
HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND INCORPORATION
INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.
050-207
4-Channel SMPTE Copper to Fiber Media Converter
HD-SDI and 3G-SDI
4 Channel SMPTE Copper to Fiber Media Converter
The Glenair 050-207 is a 4-Channel SMPTE Copper to Fiber Optic Media
Converter which extends the reach between the camera and the video display or
data recorder. This media converter is configured as either transmitter, converting
electrical SMPTE signals to fiber, or as a receiver, converting fiber optic signals
into the electrical SMPTE signals. The media converter incorporates a power
supply which has been designed to accept a wide DC input voltage range, 18V to
36V. The 050-207 is designed for harsh environments and incorporates
electronics in an environmentally sealed enclosure that incorporates two (2)
D38999 connectors to support Electrical connections and Glenair High Density
(GHD) connector for the fiber optic interconnect. Signal I/O and BIT functionality is
supplied through one D38999 connector and power is provide through a separate
D38999 connector. The Fiber Optics passes through Glenair GHD connector.
KEY FEATURES/BENEFITS
 850nm Lasers for MMF up to 500m links
 GaAs PIN PD for MMF up to 500m Links
 SMPTE EG 34:2004
Compliant to
Pathological Conditions CASE 1, CASE 2
and CASE 3.
 SMPTE ST 297:2006 (3G-SDI & HD-SDI)
 SMPTE 424 Compliant (3G-SDI)
 SMPTE 292 Compliant (HD-SDI)
 Electronic Circuitry
 Wide Input Voltage Range: 18-36V
 IP67 in mated condition
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 2
∙
1211 AIR WAY



D38999 with Quadrax and #22 Pin contacts for Signal
and BIT I/O
D38999 with #22 Pin contacts for Power
GHD Fiber Optic connector
OPTIONAL FEATURES
 Built In Test Console Port accessible via USB2.0
APPLICATIONS
•
Harsh Environment Ethernet for Airborne, Tactical and
Shipboard applications
US Cage Code 06324
∙
GLENDALE, CA 91201-2497
PAGE 2 of 13
Printed in USA
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: [email protected]
050-207
4-Channel SMPTE Copper to Fiber Media Converter
HD-SDI and 3G-SDI
Functional Block Diagram
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 2
∙
1211 AIR WAY
US Cage Code 06324
∙
GLENDALE, CA 91201-2497
PAGE 3 of 13
Printed in USA
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: [email protected]
050-207
4-Channel SMPTE Copper to Fiber Media Converter
HD-SDI and 3G-SDI
Connectors
NAME
Insert
Arrangement
J1
Function
Media Converter
Mating PLUG
Connector
Electrical Signal,
Power, and Built In
Test (BIT)
D38999 Series III type,
19C-18
Generic PN
D38999/26#F18SN type
14X SIZE 22D Pins
4X SIZE 8 Pins
(AS39029/119)
Glenair PN
257-606-G6##19-18SN
Coax Socket Contacts
852-083-01
Socket Contacts
M39029/56-348
Power
J2
D38999 Series III type,
11-35
13X SIZE 22D Pins
Generic PN
D38999/26#B35SN
Glenair PN
233-105-G6##11-35SN
Socket Contacts
M39029/56-348
Fiber Optic Signal
J3
GHD
Shell Size 11
Arrangement 4
Glenair PN
180-122-#06-11-4N
CONTACTS
180-056
CONTACTS:
180-051-1260C
Note: # = Environmental Class (Material/Finish)
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 2
∙
1211 AIR WAY
US Cage Code 06324
∙
GLENDALE, CA 91201-2497
PAGE 4 of 13
Printed in USA
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: [email protected]
050-207
4-Channel SMPTE Copper to Fiber Media Converter
HD-SDI and 3G-SDI
Built In Test (BIT) Functionality – USB 2.0
This media converter can be offered with built in test functionality accessible through a Console Port via Universal Serial
Bus 2.0 (USB 2.0)
Functional block diagram for this is shown below.
Universal Serial Bus (2.0) BIT
• Presents itself as a “Virtual” Communications Port
• Compatible with Microsoft Windows, Mac, and Linux OS’s.
• On the computer side, open any terminal application (PuTTY, HyperTERM, TeraTERM, etc.) to communicate with
the media converter hardware.
• Simple “Human Readable” status messages.
ALARM STATUS MESSAGES
Unit Identification Information
• Unit Serial Number
• Unit Product Code
Fiber Side Alarm/Status
• Temperature
• Transmitter TX Fault
• Transmitter Disable Status
• Receiver loss of signal (LOS) or signal Detect (SD) Status
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 2
∙
1211 AIR WAY
US Cage Code 06324
∙
GLENDALE, CA 91201-2497
PAGE 5 of 13
Printed in USA
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: [email protected]
050-207
4-Channel SMPTE Copper to Fiber Media Converter
HD-SDI and 3G-SDI
TYPICAL CONSOLE PORT WINDOW (PuTTY)
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 2
∙
1211 AIR WAY
US Cage Code 06324
∙
GLENDALE, CA 91201-2497
PAGE 6 of 13
Printed in USA
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: [email protected]
050-207
4-Channel SMPTE Copper to Fiber Media Converter
HD-SDI and 3G-SDI
Ratings and Specifications –
OPERATING CONDITIONS
Parameter
Symbol
Min
Operating Temperature
T op
-40
Supply Voltage
V cc
18
Supply Current
Icc
Typ
Max
Units
+85
°C
28
36
V
100
150
mA
Notes
ABSOLUTE M AXIMUM RATINGS
Parameter
Symbol
Min
Typ
Max
Units
Storage Temperature
Ts
-55
+100
°C
Supply Voltage
V cc
-0.4
40
V
Symbol
Min
Max
Units
Operating Temperature
T op
-40
+85
°C
Supply Voltage
V cc
18
Supply Current
Icc
Notes
VccT may not differ by more than
0.5V
OPERATING CONDITIONS
Parameter
Typ
28
36
V
100
150
mA
Notes
ELECTRO-OPTICAL CHARACTERISTICS – TRANSMITTER
Parameter
Optical Output Power
Symbol
Min
Typ
Max
Units
Notes
P OUT
-8
-5
-3
dBm
850nm VCSEL,
1.5Gbps & 2.97Gbps
Extinction Ratio
Optical Wavelength
Er
8
10
λ OUT
830
850
dB
860
1.5Gbps & 2.97Gbps
nm
Spectral Width, rms
Δλ
0.85
nm
Relative Intensity Noise
RIN
-117
dB/Hz
Timing Jitter
TJ
1
UI
SMPTE 292, 1.5 Gbps, Color bar
Alignment Jitter
AJ
0.2
UI
SMPTE 292, 1.5 Gbps, Color bar
Timing Jitter
TJ
2
UI
SMPTE 424, 2.97Gbps, Color bar
UI
SMPTE 424, 2.97Gbps, Color bar
Alignment Jitter
AJ
Transmitter Differential Input Impedance
Zin
Differential Input Voltage
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
Vin_d
REV: 2
∙
1211 AIR WAY
0.2
100
250
2200
Ohms
AC coupled Internally
mV p-p
CML, 100 ohm
US Cage Code 06324
∙
GLENDALE, CA 91201-2497
PAGE 7 of 13
Printed in USA
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: [email protected]
050-207
4-Channel SMPTE Copper to Fiber Media Converter
HD-SDI and 3G-SDI
Ratings and Specifications - (continued)
ELECTRO-OPTICAL CHARACTERISTICS - RECEIVER
Parameter
Symbol
Min
Typ
Max
Units
Notes
-22
-20
dBm
PIN PD @ 1.485 Gbps
--19
-17
dBm
PIN PD @ 2.970 Gbps
dBm
@1.485 Gbps or @ 2.970 Gbps
050-332-1
Sensitivity, BER 10-12, PRBS 2-7-1, Er 10 dB
P IN
050-332-2
Sensitivity, BER 10-12, PRBS 2-7-1, Er 10 dB
P IN
Overload, BER 10-12, PRBS 2-7-1
P IN
-1
Optical Wavelength
λ IN
830
Receiver Differential Output Impedance
Rout
Differential Output Voltage Swing
Vout_d
LOS Assert Level
LOS HYS
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
100
REV: 2
∙
1211 AIR WAY
-23
1.5
nm
Ohms
600
LOS
LOS Hysteresis
860
2.3
AC coupled internally
1200
mV
CML, 100 ohm
-21
dBm
@1.485 Gbps or @ 2.970 Gbps
dB
@1.485 Gbps or @ 2.970 Gbps
US Cage Code 06324
∙
GLENDALE, CA 91201-2497
PAGE 8 of 13
Printed in USA
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: [email protected]
050-207
4-Channel SMPTE Copper to Fiber Media Converter
HD-SDI and 3G-SDI
Ratings and Specifications - (continued)
COMPLIANCE SPECIFICATIONS
CHARACTERISTIC
Standard
Condition
Notes
6-9rms
Mechanical Shock
MIL-STD-810
40g
Mechanical Vibration
MIL-STD-810
30g rms
ESD
Conducted Emissions,
Power Leads, 30 Hz to 10 kHz
Conducted Emissions,
Power Leads, 10 kHz to 10 MHz
Conducted Susceptibility,
Power Leads, 30 Hz to 150KHz
Conducted Susceptibility, Transients,
Power Leads
Conducted Susceptibility, Structure Current,
60 Hz to 100 kHz
Conducted Susceptibility,
Bulk Cable Injection, 10 kHz to 200 MHz
Radiated Susceptibility,
Magnetic Field, 30 Hz to 100 kHz
Radiated Susceptibility,
Electric Field, 2 MHz to 18 GHz
Radiated Emissions, Magnetic Field,
30 Hz to 100 kHz
Radiated Emissions, Electric Field,
10 kHz to 18 GHz
Mating Durability
MIL-STD-883
Class II
MIL-STD-461F
CE101
MIL-STD-461F
CE102
MIL-STD-461F
CS101
MIL-STD-461F
CS106
MIL-STD-461F
CS109
MIL-STD-461F
CS114
MIL-STD-461F
RS101
MIL-STD-461F
RS103
MIL-STD-461F
RE101
MIL-STD-461F
RE102
MIL-DTL-38999/20
500 Cycles
2200V HBM
Flame Resistance
EIA364-104
30 seconds
Damp Heat
EIA364-321
240 hours
Aircraft Electrical Power Characteristics
Eye Safety
www.glenair.com
28V DC Systems
CDRH and IEC-825
©2014 Glenair, Inc.
GLENAIR, INC.
MIL-STD-704F
REV: 2
∙
1211 AIR WAY
Class 1 Laser
Product
US Cage Code 06324
∙
GLENDALE, CA 91201-2497
PAGE 9 of 13
Printed in USA
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: [email protected]
050-207
4-Channel SMPTE Copper to Fiber Media Converter
HD-SDI and 3G-SDI
Ratings and Specifications - (continued)
Material/Finish
Item
Housing & Connector Shell
Plating Finish: M
Plating Finish: MT
Plating Finish: NF
Contacts
Material/Finish
Aluminum
Nickel
Nickel PTFE
Olive Drab Cadmium
Copper alloy, 50 μInch gold plated
D38999 Inserts
Thermoplastics
Interfacial Seals, 38999 only
Elastomer, Fluorosilicon
Optical Ferrules & Sleeves
Zirconia, Ceramic
Insulators
Contact retention clip
Seal, O-rings
Seal
Spring
PC tail contacts
PCB flex
Encapsulant
Solder type
Liquid crystal polymer (LCP)
Beryllium copper alloy
Fluorosilicone rubber
Silicone elastomer
Nickel-plated beryllium copper
Copper alloy/gold plated
FR4 & Polyimide
HYSOL EE4215
RoHS compliant Sn95/Sb5 (232°C melting temp) &
RoHS compliant Sn96.5/Ag3.0/Cu0.5 (217° melting)
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 2
∙
1211 AIR WAY
Mater
ial/Fi
nish
US Cage Code 06324
∙
GLENDALE, CA 91201-2497
PAGE 10 of 13
Printed in USA
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: [email protected]
050-207
4-Channel SMPTE Copper to Fiber Media Converter
HD-SDI and 3G-SDI
OUTLINE DRAWING & PANEL CUT OUT
Outline Drawing
Dimensions inches
x.x ± 0.1”
x.xx ± 0.03”
x.xxx ± 0.0015”
Please contact Factory for other configurations
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 2
∙
1211 AIR WAY
US Cage Code 06324
∙
GLENDALE, CA 91201-2497
PAGE 11 of 13
Printed in USA
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: [email protected]
050-207
4-Channel SMPTE Copper to Fiber Media Converter
HD-SDI and 3G-SDI
Input/Output Definition
J1 – ELECTRICAL SIGNAL CONNECTOR
J1- Transmitter Configuration
PIN
A
B
C
D
E
F
G
H
J
K
L, M,N
P
R, S
T
U
NAME
NC
Channel 1
USB Service Port, D+
USB Service Port, DNC
Channel 2
NC
USB Service Port, Ground
Reset_F
Channel 3
NC
Channel 4
NC
Ground
DESCRIPTION
I/O
*
SMPTE HD-SDI or 3G-SDI
USB Data Positive
USB Data Negative
Input
Input / Output
Input/Output
SMPTE HD-SDI or 3G-SDI
Input
USB, Ground
SMPTE HD-SDI or 3G-SDI
--Input
Input
SMPTE HD-SDI or 3G-SDI
Input
Signal Ground
USB Service Port, VBUS
5V
--Input
38999 Series III
Mating face for PIN shown
J1- Receiver Configuration
PIN
A
B
C
D
E
F
G
H
J
K
L, M,N
P
R, S
T
U
NAME
NC
Channel 1
USB Service Port, D+
USB Service Port, DNC
Channel 2
NC
USB Service Port, Ground
Reset_F
Channel 3
NC
Channel 4
NC
Ground
DESCRIPTION
I/O
SMPTE HD-SDI or 3G-SDI
USB Data Positive
USB Data Negative
Input
Input / Output
Input/Output
SMPTE HD-SDI or 3G-SDI
Output
USB, Ground
SMPTE HD-SDI or 3G-SDI
--Input
Output
SMPTE HD-SDI or 3G-SDI
Output
Signal Ground
USB Service Port, VBUS
5V
--Input
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 2
∙
1211 AIR WAY
*
38999 Series III
Mating face for PIN shown
US Cage Code 06324
∙
GLENDALE, CA 91201-2497
PAGE 12 of 13
Printed in USA
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: [email protected]
050-207
4-Channel SMPTE Copper to Fiber Media Converter
HD-SDI and 3G-SDI
Input/Output Definition (continued)
J2 – POWER CONNECTOR
J2 PIN FUNCTION ASSIGNMENTS
PIN
1-10
12
11
NAME
No Connect
No Connect
Vcc
13
VDC Return
DESCRIPTION
NOTES
38999 Series
III, 11-35
Mating face for
PIN shown
11X SIZE 22D
18-36VDC
J3 – OPTICAL CONNECTOR
J3- Transmitter Configuration
PIN
NAME
1
TX1
2
TX2
3
TX3
4
TX4
DESCRIPTION
Channel 1
SMPTE HD-SDI or 3GSDI
Channel 2
SMPTE HD-SDI or 3GSDI
Channel 3
SMPTE HD-SDI or 3GSDI
Channel 4
SMPTE HD-SDI or 3GSDI
INPUT / OUTPUT
Input
Input
Input
Input
GHD
J3- Receiver Configuration
PIN
NAME
1
RX1
2
RX2
3
RX3
4
RX4
DESCRIPTION
Channel 1
SMPTE HD-SDI or 3GSDI
Channel 2
SMPTE HD-SDI or 3GSDI
Channel 3
SMPTE HD-SDI or 3GSDI
Channel 4
SMPTE HD-SDI or 3GSDI
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 2
∙
1211 AIR WAY
INPUT / OUTPUT
Output
Output
Output
Output
GHD
US Cage Code 06324
∙
GLENDALE, CA 91201-2497
PAGE 13 of 13
Printed in USA
∙
TEL: 818-247-6000
∙
FAX: 818-500-9912
E-mail: [email protected]